Complete wheel from Saltplus. Bullt onto a Saltplus Trapez V2 cassette. this wheel features the tough double wall Mesa rim with straight side walls. ###section### Product Specs WHEEL SIZE: 20" HUB: Saltplus Trapez V2 AXLE: 14mm Chromoly Male DRIVE SIDE: Left & Right Switchable RIM: Mesa Rim SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 1236g / 43.59oz
Dual Angular Contact,this describes the use of both angular contact bearings and angled bearing cups/hub bores used in the hub design. The AC-2 hub features revolutionary bearing installation and function never seen before in a bicycle hub. It has been designed from the ground up for ease of maintenance and optimal bearing performance. Here are a few key points of the AC-2 BMX Front Hub: The AC-2 hubs use 20mm Angular Contact bearings with a wave spring pre-load. Bearings are pressed into tapered cups that mate with the angled bores machined into the hub shell. This design feature allows bearing/cup to be easily installed and removed from hub shell without any special tools. No more presses or hammers needed! Another attribute of the tapered bearing cup/angled hub shell bore design is how the bearings seat in the hub. The bearings/cups on each side of the hub shell are in perfect alignment with each other! This ensures superior bearing performance and less chance of premature wear. Hub shell literally floats on the axle. The only force on the bearings is supplied by the wave spring (which delivers the appropriate bearing pre-load needed for angular contact bearings). Tightening of axle bolts has absolutely no affect on the bearings! The bearings, wave spring, and shim(s) are secured on the axle by one retaining ring. The only tool used to assemble/disassemble the AC-2 hub is a pair of snap ring pliers! ###section### Product Specs AXLE SIZE: Females Bolts SPOKE HOLES: 36h BEARINGS: Steel 20mm angular contact WEIGHT: 245g / 8.64oz
These lightweight, strong BMX forks have a built in bearing race and a threadless 1" steertube with 10mm dropouts. 100% 4130 heat treated butted Chromoly. Alloy top cap with etched logo included. No rider weight limit. ###section### Product Specs Steerer Length: TBC Steerer Diameter: 1" Wheel Size: 20" Material: Chromoly Dropout Size: 10mm Offset: TBC Weight: 625g (top cap included)
These lightweight, strong BMX forks have a built in bearing race and a threadless 1" steertube with 10mm dropouts. 100% 4130 heat treated butted Chromoly. Alloy top cap with etched logo included. No rider weight limit. ###section### Product Specs Steerer Length: TBC Steerer Diameter: 1" Wheel Size: 20" Material: Chromoly Dropout Size: 10mm Offset: TBC Weight: 540g (top cap included)
The Swerve hub from BSD has an ultra fast engagement made possible by it’s 150 tooth ratchet ring plus individually toothed pawls, the pedal gap on this hub is almost non-existent and the noise it creates is a loud buzz. The Swerve hub is perfect for tech moves where a small pedal gap really helps. The Swerve hub uses many of the same parts as the Back Street Pro hub, such as bombproof 14mm female bolts, chromoly cones, a massive female axle and super tought 6903 bearings. Hubguards available separately. Non-drive side and Drive side. ###section### Product Specs HUB TYPE: Cassette AXLE: Female Bolts DRIVER: 9t DRIVE SIDE: Right Side Drive SPOKE HOLES: 36h WEIGHT: 495g / 16.5oz
Eclats latest hub is based on the popular Cortex coaster hub but now available as a Cassette hub, Features of this super strong street hub hub include; 6061 T6 Alloy hub shell, Hardened crmo 14mm male axle, hex key inner axle for easy maintenance, 2 high quality hub bearings with 3 durable driver bearings, Available in both LHD & RHD and each hub comes with nylon Viper & Gong drive and non driveside hub guards for even more street protection ###section### Product Specs HUB TYPE:Cassette AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:608g / 21.45oz
The Trebol Male Freecoaster hub is an affordable but reliable freecoaster hub that starts out with a CNC machined 7075-T6 aluminum shell with a 4130 chromoly, 14mm male axle. This hub utilizes the standard freecoaster system with two sealed bearings and a 9-tooth driver. ###section### Product Specs HUB TYPE:Freecoaster AXLE:Male DRIVER:9t SPOKE HOLES:36h WEIGHT:TBC
A revolutionary freecoaster system utilizing Wethepeople's Magnetic Pawl Retention system, with a large slack setting like the Helix freecoaster, but 33% lighter and fully convertible into a regular cassette hub. Tested, developed, and trusted by Wethepeople team riders Felix Prangenberg and Tom Weikert. Features a 6061-T6 alloy refined hub-shell, hardened heat-treated crmo axle with 14mm hollow bore, 4 high quality sealed bearings and 2 nylon hubguards. ###section### Product Specs HUB TYPE:Freecoaster AXLE:14mm DRIVER:9t SPOKE HOLES:36h WEIGHT:491g (17.32oz)
The Shift Freecoaster Hub is the most advanced hub Eclat offer, using their patented Hybrid System that's lighter than a standard Freecoaster. Combining the smoothness and durability of a Cassette with the endless possibilities of a freecoaster. Built with a 6061-T6 alloy hub-shell, hollow bore chromoly axle with high performance bearings throughout for smoothness. Eclat's MagnaDrive driver offers increased performance and reliability. The Eclat Shift Freecoaster Hub can be easily converted into a straight Cassette hub with no additional parts needed and also includes the Eclat Viper Nylon Hub Guard and Gong Driver Hub Guard. Please note: This hub is available in both Right Side Drive and Left Side Drive. ###section### Product Specs HUB TYPE: Freecoaster AXLE: 14mm Male DRIVER: 9T DRIVE SIDE: Available in both Right Side and Left Side Drive SPOKE HOLES: 36h WEIGHT: 510g (oz)
Based on team rider feedback, Sunday introduces the 28mm offset Nightshift Forks. And don't worry, it's still backed by a 41 Thermal lifetime warranty against bending and breaking. ###section### Product Specs Steerer Length: TBC Steerer Diameter: 1 1/8" Wheel Size: 20" Material: 4132 CrMo Dropout Size: 14mm Offset: 28mm Weight: TBC
Fiends new Invest fork features fully heat-treated chromoly tubing throughout with a 1pc. machined steerer tube with integrated bearing race for use with all 45v45 headsets and a 6061 alloy compression bolt. The 6mm thick investment cast drop out and lower leg junction provide the ultimate strength while maintaining a clean look and the 26mm offset helps keep the front wheel under the rider for easier nose manuals.###section### Product Specs Steerer Length: 162mm Wheel Size: 20" Material: 4130 Chromoly Dropout Size: 10mm Offset: 26mm Weight: 963g / 2.124lbs ###section###
Eclats latest hub is based on the popular Cortex coaster hub but now available as a Cassette hub, Features of this super strong street hub hub include; 6061 T6 Alloy hub shell, Hardened crmo 14mm male axle, hex key inner axle for easy maintenance, 2 high quality hub bearings with 3 durable driver bearings, Available in both LHD & RHD and each hub comes with nylon Viper & Gong drive and non driveside hub guards for even more street protection ###section### Product Specs HUB TYPE:Cassette AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:608g / 21.45oz
Durable cassette style freecoaster hub from Saltplus. The saltplus Trapez hub can be converted from freecoaster to cassette with the Trapez spring kit (Sold seperately). The slack of the freecoaster can adjusted using the included discs. ###section### Product Specs HUB TYPE:Cassette / Coaster Switchable AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:467g / 16.47oz
A fully sealed casette hub from Salt BMX, Alloy shell, Slim low flange, compatible with Saltplus PRO Nylon hubguard ###section### Product Specs HUB TYPE:Cassette AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:548g / 19.33oz
Sam Jones' signature BSD Jonesin' Forks give him that little extra edge up front to keep him balanced. The steerer tube is made from 1-piece of fully CNC machined, heat treated chromoly, the legs are tapered, triple butted heat treated chromoly with a full post weld heat treatment to ensure these forks are at maximum strength. The Jonesin' Fork features 22mm offset invest cast dropouts, integrated headset race and clearance for 2.4" tyres. ###section### Product Specs Steerer Length: 157mm Wheel Size: 20" Material: 4130 Chromoly Dropout Size: 10mm Offset: 22mm Weight: 997g / 2.2lbs
The Mission Deploy hub gives you a chance to upgrade to a freecoaster without breaking the bank. With sealed bearings throughout, adjustable slack, heat-treated chromoly axle, and left and ride hand drive options, the Deploy hub has you covered. ###section### Product Specs HUB TYPE:Freecoaster AXLE:14mm DRIVER:9T SPOKE HOLES:36h WEIGHT:22.0oz
The Mission Deploy hub gives you a chance to upgrade to a freecoaster without breaking the bank. With sealed bearings throughout, adjustable slack, heat-treated chromoly axle, and left and ride hand drive options, the Deploy hub has you covered. ###section### Product Specs HUB TYPE:Freecoaster AXLE:14mm DRIVER:9t SPOKE HOLES:36h WEIGHT:22.0oz
Monogram Bike flight bag from Odyssey. Odyssey worked on this bag for over a year to make sure this travel bag is just right. Not skimpy, but also not overbuilt to keep the weight down. The Monogram will make traveling with a bike a whole lot easier. Features Easy load opening Interior tool pouch Bike specific handle locations Re-inforced and riveted handles Heavy duty and grippy wheels Multiple tie downs and straps Minimal details for lightweight and stealth looks Interior divider for clean / dirty sections as well as for hiding the bike
Offering protection from the elements with classic Vans styling, the Street Outdoor MTE-1 Jacket features durable water repellent coating, a secure zip front closure, a hood, and lightweight fill for added warmth. The colourblocked design adds a unique aesthetic, and the woven logo label brings a workwear vibe. Made with a mix of polyester and nylon, this durable ripstop parka delivers on a promise of an all-weather enabling product.
The Shiv Fork is in its third revision, for the V3 Fit set out to create and produce a fork with plenty of tyre clearance. Offering a quick 25mm offset, seamless swaged legs that provide more strength than welded or fused caps - especially if pegs are installed. Because the end of the fork legs are formed, not capped and welded there is nothing to fracture. A longer 166mm CNC machined steerer tube features increased wall thickness wherever possible and a 24mm x 1.5 compression cap with integrated race. ###section### Product Specs Steerer Length: 166mm Wheel Size: 20" Material: 4130 Chromoly Dropout Size: 10mm Offset: 25mm Weight: 1020g / 2.25lbs