Sleek and stable, the Shimano MT500 hydraulic disc brake offers reliable power perfect for riding styles from XC to trail.Twin piston brake caliper providing efficient braking with a minimalist designFor use with Mineral oil which is non-corrosive and less hazardous than conventional hydraulic fluidThe one-way internal fluid circuit makes bleeding easy, while great piston retraction increases pad to rotor clearanceShim-less mounting bracket allows for quick installation and set upCompatible with international standard and post mount forksTo be used in conjunction with Shimano hydraulic brake leversComes as standard with B01S resin pads (can be used with sintered)
The Shimano BR-MT200 brake caliper is a non-groupset-integrated 2-piston system that can be used on mountain bikes as well as touring or city bikes. It convinces with its reliable and quiet braking performance, which is adapted to the requirements of beginners. In addition, One Way Bleeding makes bleeding very easy. The painted aluminium brake caliper can be mounted front and rear and comes with a pair of synthetic resin brake pads.Great value brake caliper gives you plenty of power when you require itFor use with mineral oil which is non-corrosive and less hazardous than conventional hydraulic fluidShim-less mounting bracket allows for quick installation and set upCompatible with post mount or international standard forks when used with adaptersTo be used in conjunction with Shimano hydraulic brake leversCan be used with 6-bolt or Centre Lock rotorsEasy and clean bleeding thanks to one-way bleeding calliperWith G02S resin pads
The Shimano R550 is an SPD-SL road pedal for entry level use, now updated from the previous PD-R540 with a lightweight composite body. They are easy to clip into and release but provide a stable fit for maximum power transfer to the pedals. Adjustment can be made for the release tension, allowing you to get used to the pedals and gradually raise the tension as you go. The wider cleat and binding mechanism combined with a wide pedal platform offers improved foot/pedal stability and better shoe/pedal contact than traditional SPD systems. The R550 pedals feature a low profile platform with an open design for easy access and cleat adjustments, all built around a low maintenance sealed cartridge axle unit.Weight: 310g pairSupplied With Shimano SH11 Cleats (3° Float)
The handmade Shimano RS171 wheelset stands for stability and very high rigidity. The wheels with Centre Lock disc brake mount and E-Thru standard offer simple handling and workability.24mm High profile aluminium rim for improved aero dynamicsEasy to use centre lock rotor mount for use with disc brakes12 x 142mm Thru Axle Rear / 12 x 100mm Thru Axle Front (Axle Not Supplied)8, 9, 10 & 11-speed compatibleRecommended tyre with: 25-38cThe hubs feature high-quality contact seals and cup and cone bearings for smooth rolling and best performance.
This XT level press-fit bottom bracket assembly is designed for Shimano HollowTech II MTB cranks and features fibre reinforced polymer cups to reduce the risk of noise and frame damage during installation/removal. The sealed design protects the bearings from dirt and water ingress, and ensure the product is maintenance free during it's lifespan. Suitable For 89.5mm Or 92mm BB Shells.
Genuine Shimano HollowTech II bottom bracket assembly. Set includes left and right hand cups, spacers, inner cover, and inner O-rings. The length of screw thread is increased to enable the fitment of BB mount chain devices if needed. Light weight seal structure helps to remove vital grams, and the sealed cups keep out dirt and water for a simple maintenance free set up.
Shimano's Deore XT RT-RT800 compact and lightweight disc brake rotors feature rapid heat dissipation thanks to Ice Technologies Freeza heat management system. Installing and removing the rotors is quick and easy with Shimano s centre lock design.New disc brake rotor construction boosts heat dissipation and reduces fadeEasy disc brake rotor installation with spline mount and lock ringAdvanced heat sync design reduces brake fadeLightweight clad rotors with heat dissipating paint on exposed aluminium layer segments provide superior cooling, consistent brake performance, and lighter operation under all conditions.Clad brake pads with Aluminium/Stainless fins support rapid heat dissipation which helps reduce maintenance, provide longer pad life, and create less brake fade and noise.Featuring Ice Technologies combined with Freeza disc brake rotor construction rapidly dissipates heat for more consistent braking performance in extreme conditions, longer pad life, and less brake fade and noise. Clad brake pads with Aluminium/Stainless fins support rapid heat dissipation which helps reduce maintenance, provide longer pad life, and create less brake fade and noise.
The Shimano Disc Brake Flat Mount Adaptors convert post mount calipers to fit flat mount forks and frames. There is also an adaptor to convert a flat mount 140mm caliper to flat mount 160mm rear, to convert a flat mount 140mm to 160mm front simply rotate the 140mm front adaptor included with the brake.
Treat yourself to some premium, high performance mountain biking footwear with the Shimano ME7 (ME702) SPD MTB Shoes. Perfect for any mountain bike discipline these shoes give you total comfort, reinforced armour protection and total adjustability for a great fit.Reinforced armour provides great protection and excellent durabilityUnique TORBAL carbon reinforced midsole gives excellent pedalling efficiencyExpanded shoe cleat adjustment range to help riders optimise their set up for extreme terrainSpeed lacing system adapts to wide range of foot shapes with a secure fitMichelin high-performance, dual-density rubber outsole offers superior tractionShimano have made the ME7 shoes to give you the superb pedalling efficiency that rivals that of an XC shoe. A more natural feel has been achieved from the torsional midsole helping to improve your flow with a new and improved motion during downhill descents. The shoe has then been beefed up with reinforced armour to protect your feet and a stretch neoprene ankle collar that will fend off flying trail debris. For the fit and comfort Shimano have equipped the ME7 shoes with the speed lacing system which easily adapts to the shape of your foot and alongside the reverse mount buckle the shoes are comfortably secured in place. The extra cushion insole ups your comfort levels while for the outsole there is Michelin high-performance, dual density rubber giving superior traction both on and off the bike. Size Chart:
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Road riding has never been this much fun. That's because the redesigned Ultegra ST-R8170 Dual Control Levers have all-new ergonomics, even more precise brake modulation, and wireless electronic shifting. This trifecta lets you focus on the next sprint, the next descent, or the next joke from your riding partner.Shimano's new Ultegra ST-R8170 brake levers bring enhanced modulation and control to every ride by employing Shimano's proven Servo Wave technology. The all-new Di2 platform, used on both Dura-Ace and Ultegra, untethers the shifters while delivering our fastest, most reliable wireless shifting. Your time on the bike is precious, let Shimano make it even better.High performance Ultegra Wireless hydraulic Servo Wave disc brake Di2 STI's give you control, modulation and power with minimal effort in all riding conditionsWireless connectivity to the front and rear derailleurs for effortless trouble free gear shiftsWith Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gearFull and semi synchronized shifting programable, Synchro shift compatible meaning a single shifter can control both front and rear shifting which can be fully custom tuned to your riding preferences. Semi synchronized shifting means when a front shift is made the rear mech will automatically correct to the appropriate ratioSimply pressing tactile buttons allows effortless and comfortable shifting even when your hands are coldDrop bar STI with shift buttons located in a near identical place to the positions you'd assume shifting using a mechanical Shimano STIHydraulic brake lever with Servo Wave provides excellent stopping power with less effort especially from the hood positionHydraulic reservoir tank provides pad to rotor clearance auto-adjust maintaining braking performance during pad wearFinely tuneable reach adjusters for the levers enable custom fitment for all handsLevers use CR1632 batteries which last for approximately 1.5-2 years
Road riding has never been this much fun. That's because the redesigned Ultegra ST-R8170 Dual Control Levers have all-new ergonomics, even more precise brake modulation, and wireless electronic shifting. This trifecta lets you focus on the next sprint, the next descent, or the next joke from your riding partner.Shimano's new Ultegra ST-R8170 brake levers bring enhanced modulation and control to every ride by employing Shimano's proven Servo Wave technology. The all-new Di2 platform, used on both Dura-Ace and Ultegra, untethers the shifters while delivering our fastest, most reliable wireless shifting. Your time on the bike is precious, let Shimano make it even better.High performance Ultegra Wireless hydraulic Servo Wave disc brake Di2 STI's give you control, modulation and power with minimal effort in all riding conditionsWireless connectivity to the front and rear derailleurs for effortless trouble free gear shiftsWith Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gearFull and semi synchronized shifting programable, Synchro shift compatible meaning a single shifter can control both front and rear shifting which can be fully custom tuned to your riding preferences. Semi synchronized shifting means when a front shift is made the rear mech will automatically correct to the appropriate ratioSimply pressing tactile buttons allows effortless and comfortable shifting even when your hands are coldDrop bar STI with shift buttons located in a near identical place to the positions you'd assume shifting using a mechanical Shimano STIHydraulic brake lever with Servo Wave provides excellent stopping power with less effort especially from the hood positionHydraulic reservoir tank provides pad to rotor clearance auto-adjust maintaining braking performance during pad wearFinely tuneable reach adjusters for the levers enable custom fitment for all handsLevers use CR1632 batteries which last for approximately 1.5-2 years
The Shimano BL-M7100 SLX Brake Lever gives you powerful, stable and versatile braking power which is tuneable to your personal preference and super easy to set up. Optimized lever axle position with additional contact point and refined ergonomics10% stiffer than M8000 even under high temp conditionsQuicker brake engagement with shorter free strokeGreater flexibility and action-optimized cockpit layoutRider tuneable; Toolless reach adjustThese levers offer a quicker brake engagement with a shorter free-stroke with toolless reach adjustment so that you can fine tune them to your liking. They are stiffer than the M8000 levers even in high temperature conditions. The lever axle position has been optimised for additional contact point and refined ergonomics.
Newly redesigned the Shimano M7000 SLX 11-Speed Shadow+ Rear Derailleur takes cutting edge technology from the XTR and XT groupsets and brings it down to a more affordable price range. Brings Cutting Edge Technology from XTR and XT Level to an Affordable Price PointShadow+ Clutch Mechanism for Excellent Chain RetentionShadow Design Optimised For 40-46t SprocketsDirect Cable Routing Prevents Snagging on Trail Size HazardsSealed Bearing PulleysThe lightweight and low profile design combined with the direct cable routing prevents those unwanted snagging moments on undergrowth or something a little harder, helping to keep your shiny rear derailleur in one piece and still attached to the bike. Drivetrain security goes even further with the Shadow+ Clutch design. As we push our bikes harder dropping a chain is the last thing you need. With Shadow+ dropped chains should be a thing of the past. The M7000 SLX rear derailleur is optimised around 40-46t cassette sprockets, being compatible with a maximum of a 42t cassette when used with a double chainset, or with a 46t if used with a single chainring. Sealed bearing pulleys ensure this derailleur is designed to go the distance. Tough, light weight and great value, SLX M7000 is a great choice for those seeking top performance without having to re-mortgage!
Shimano Dura-Ace groupset is designed to be the best and the Dura-Ace BB-R9100 Bottom Bracket is no different! Incredibly light yet highly durable, the BB-R9100 uses minimal bearing interfaces to reduce drag, saving precious watts over the course of ride. Despite this and the associated smaller bearings, the BB-R9100 is incredibly durable, able to run smoothly in even the worst conditions. Designed for 24mm axle Hollowtech II chainsets, the Shimano Dura-Ace BB-R9100 Bottom Bracket is perfect for riders looking for it all from their bottom bracket; smooth performance, drag-free running teamed with fit and forget durability.
The Shimano SM-RT66 disc brake rotor gives excellent performance using the 6-bolt international standard mounting system. These brake discs are ideally suited to Shimano Zee and SLX disc brake systems when using 6-bolt, non-centre-lock hubs. They have a precision cut and drilled stainless steel braking surface which improves pad clearing in muddy conditions while aiding cooling under high load, increasing pad performance and life.