The OMM UltraFire 5 Hydration Vest offers easy access for all your essentials on a run, all the while without hindering your performance. Featuring seven easy-access pockets, there is ample space for essential supplies, with the addition of a water-resistant five litre roll-top back pocket that allows you to carry extra dry kit on longer colder days. The UltraFire’s ergonomic design also stabilises the vest at the shoulder and diaphragm allowing your lungs to be unrestricted for optimal speed.
The OMM TrailFire Hydration Vest is whatever you want it to be with a vast array of attachment points and compatibility with a range of OMM add-ons (sold separately). The vest features 4 front pockets, including 2 with secure closures, and a large dump pocket on the back. The TrailFire is also compatible with OMM’s Compressor Pod and FlexiFlask bottles. The minimalist TrailFire weighs in at just 125g, with a breathable stretch mesh construction that ensures long-lasting running comfort. Plus, the vest’s fitting system uses a replaceable bungee tensioning system to keep the vest stable.
Blueseventy's Neoprene Swim Gloves have been improved with a longer cuff to limit water entry and increase warmth around the wrists. Made with 2mm neoprene with a titanium liner to enhance insulation.
Suited to cross country, all-mountain and enduro riding, this front derailleur is durable and efficient. Plus, it's compatible with Shimano 7 and 8-Speed groupset components. Key Features: Mezzo Front Derailleur for 42T-34T-24T x 8/7 Speed Capacity: 18T Gear Teeth: 42T-34T-24T Chain Line: 50mm / 47.5mm Clamp type Φ34.9mm with Φ31.8mm adapter or Φ28.6mm adapter Shimano 7/8 Speed MTB Compatible Features: Series: Mezzo Model No.: FD-M20 Chain Ring: Triple Cassette Compatibility: 8 / 7 Speed Gear Teeth: 42T-34T-24T Capacity: 18T Route Type: Dual Pull Chainstay Angle: 66-69 Mount Type: Clamp Type Chain Line: 50mm / 47.5mm Band Diameter: Φ34.9 mm or Φ31.8mm adapter or Φ28.6mm adapter Front Clamp Band: Black Steel Rear Clamp Band: Black Aluminium Outer Link: Black Aluminium Inner Link: Steel Chain Guide: Chrome Plated Steel Weight: 143g Compatibility: Shimano 7/8 Speed MTB Compatible
Ideal for all-mountain, cross-country, enduro and adventure riding, this cassette ensures fast, smooth and dependable shifting performance anywhere. Wide-Ranging Aluminium 9-Speed Mountain Bike Cassette When it comes to adventurous riding, a wider gear range is often better. With 9 speed and an 11-42T range, the Advent cassette has the low gears you need to get up and the high gears to get back down. The steps between gears are optimized to give an even spread in gear ratios, reducing the need for double-shifting to find the right gear. Key Features: Machined aluminium large cog for reduced weight Carbon steel cogs are continuously forged for strength and shifting accuracy Compatible with standard freehub bodies
This ultra-strong steel cassette gives you smooth and responsive gear shifting performance that's ideal for enduro, cross country and all-mountain riding. Wide-Ranging 12-42T 8-Speed Steel Enduro Cassette microSHIFT built the Acolyte 8-speed, 12-42T cassette to give you all the range you need to challenge yourself. Whether you’re climbing the Cascades or the neighbourhood sledding hill, all you must think about is where to put the bike – Acolyte will take care of the rest. And yes, it works with a standard HG freehub body and a normal 8-speed chain. Key Features: Steel Cogs are continuously forged for strength and shifting accuracy Compatible with standard freehub bodies
Horizon and Neutron CrMo replacement axle kit
Ideal for cross country and general off-road trail riding, this rear mech provides fast and smooth gear shifting performance in all conditions. Key Features: Rear Derailleur for 2/3 x 6 / 7 Speed Direct Attachment Type Max. Sprockets: 32T Total Capacity: 43T Features: Model No.: RD-M21LA Cassette Compatibility: 6 / 7 Speed Front Chainring: Double / Triple Max. Sprocket: 32T Min. Sprocket: 11T Total Capacity: 43T Guide Pulley: Engineering Composite with Steel Bushing Tension Pulley: Engineering Composite with Steel Bushing Bracket Body: Resin / Black Mount Type: Reverse Bracket Type Bracket Pivot Seal: N Plate Body: Resin / Black Plate Pivot Seal: N Outer Link: Resin Steel Inner Link: Black Steel Link Pin Bushing: N Outer Plate: Black Painted Steel Inner Plate: Black Painted Steel Weight: 279g Compatibility: Shimano 6 / 7 Speed MTB Rear Derailleur Compatible
This cassette is ideal for use with road and mountain bikes, this durable and dependable cassette is engineered from nickel-plated steel for the ultimate in strength and reliability. Plus, it's compatible with standard freehub bodies and most 8-Speed drivetrains. Gear Ratios: Cassettes for 8 Speed 12-25T: 12-13-15-17-19-21-23-25 11-28T: 11-13-15-17-19-21-24-28 12-32T: 12-13-15-18-21-24-28-32 11-32T: 11-13-15-18-21-24-28-32 11-34T: 11-13-15-18-21-24-28-34
Whether you're nurturing a fearless balance biker or teaching your youngster the skills of the road on their first pedal bike, this Noodle Helmet delivers peace of mind for you and protection from inevitable bumps and tumbles for them. The easy-to-use ratchet adjustment wheel means that it’s quick and simple to dial in the perfect fit on even the most lively little rider and once they are up to full speed there are 19 vents to flow cool air over their head on warm days. They experience that joyous sense of freedom and wind through the hair on every ride. It will feel invisible to them, but underneath you know that there is an In-mould helmet construction that uses a tough outer shell and EPS CORE to dissipate the energy of an impact. Should they still be out in low light conditions, the reflective graphics help to highlight their position to others.
All set for long days on your favourite mountain routes, these trail-ready pedals boast a dual-sided mechanism for easy pedal entry, secure cleat holding and positive, consistent release. Hope has also put these through its CNC machining process to shave off any unnecessary excess material, while still maintaining maximum strength. Another highlight is their cartridge bearings and maintenance-free IGUS bushing for smooth long-term durability. Large Platform Trail Clip Pedal Whether you're shredding the trails with your riding buddies or exploring new routes on your own, these clip-in pedals are engineered for performance. Hope has equipped these with a large contact area for excellent stability, while their eight replaceable pins deliver increased grip as you charge through demanding terrain conditions. One final highlight is they come supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also -allow 2mm of lateral (side to side) float. With a design that's fully serviceable and rebuildable, these are a perfect choice of upgrade for conquering wherever your next trail adventure takes you. Technologies: - Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability. - Fully serviceable and re-buildable. - Axle is high strength Cr-Mo, heat treated and plated. - Titanium axle upgrades available (sold separately). - Q-Factor – 55mm. - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also -allow 2mm of lateral (side to side) float. - Large platform with option of 4 pins per side. Manufacturer's Part Numbers: PDUTCB Blue PDUTCC Orange PDUTCN Black PDUTCPU Purple PDUTCR Red PDUTCS Silver
Ready for XC racing, these cross country clip-in pedals come equipped with fully CNC-machined pedal bodies for the perfect balance of durability, strength and low weight pedalling performance. Hope has also kitted these out with stainless steel clips and cleats for an extra level of robustness as you dominate your way around the course. Also benefitting from titanium axles as standard, these pedals deliver a strong and secure hold to your crank arms as you transfer all of your power. Dual Sided XC Clip-In Pedals Developed for ease of use, these XC clip-in pedals feature a rider-friendly dual sided profile, which makes pedal entry very simple. In addition, its dual mechanism on both sites of each pedal provides secure cleat retention as well as positive, consistent release when required. One final highlight is they come complete with two cleat options supplied to suit a wide range of riders. Technologies: - Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability. - Fully serviceable and re-buildable. - Race Clip pedal supplied with Titanium axle as standard. - Q-Factor – 55mm. - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Manufacturer's Part Numbers: PDURCB Blue PDURCC Orange PDURCN Black PDURCPU Purple PDURCR Red PDURCS Silver
Engineered for powering you through the roughest of terrain conditions, these DH-orientated pedals are equipped with a fully CNC-machined pedal body construction for maximum strength and durability. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you. Downhill Clip-In Pedals with Large Platform Size Perfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability. Technologies: - Fully serviceable and re-buildable - Titanium axle upgrades are available separately - Q-Factor – 55mm - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. - Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. - Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability. Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS Silver
The Haglofs Women's Rapid Hooded Jacket provides premium protection with a sustainable edge. Made from tear and wind-resistant PERTEX® Quantum shell fabric, it offers durability and warmth from the bitter cold. It also comes insulated with a remarkable recycled synthetic down called Mimic GOLD, this emulates the extraordinary warming characteristics of real down, but gives excellent performance even when wet. Additionally, QuadFusion™ insulation in non-quilted areas provides reliable warmth, lets you move freely, and reduces the risk of cold spots. Finished with stretch fleece inserts, an adjustable hood and trims, and pockets for housing important valuables. About PERTEX® PERTEX® is a range of high-performance fabrics balancing lightness, strength and performance engineered for use in apparel, sleeping bags and down jackets. PERTEX® fabric technology is based on a natural phenomenon called capillary action technology which means that moisture moves through the capillaries between the fibres and spreads over a large surface where it evaporates quickly. PERTEX® fabrics also have a high level of wind resistance but allow a precisely controlled amount of airflow through the fabric. This controlled airflow plays an important role in evaporating excessive moisture build-up from the inside of your jacket. Care Instructions Machine wash 40, mild process. Do not bleach. Do not use fabric softener. Wash with zippers and hook and loop fastener closed. We recommend using soap-free detergent, half dosage. Wash with similar colours. Slow spin for a long time for easier drying. Tumble dry, normal, low heat. Tumble dry the garment with 3 tennis balls, until completely dry. Separate the loose fibre filling by hand to restore loftiness when the garment is dry. Do not iron. Do not dry clean.
Perfect for cold, dry days, the dhb Windproof Cycling Gloves are designed to keep your hands protected from the winter weather. They feature a windproof fabric on the back of the hands and a soft, warm fleece inside that traps warm air for added insulation and comfort. The silicone gripper print on the index and middle fingers makes shifting and braking easy and reliable, and the palm includes specifically placed padding to allow you to ride in comfort. dhb has also ensured you can still use your phone or your cycling computer via the touchscreen-compatible fingertips.
Developed in conjunction with the Nukeproof downhill (DH) and enduro pro riders, this mountain bike (MTB) saddle features an ergonomic design that uses a combination of different densities of super-light foam to offer maximum comfort without increasing weight. Another highlight is its curved rear section that's designed to hold you in an optimised pedalling position on long climbs and to provide more tyre clearance for longer travel bikes. It has been finished with a durable vacuum-formed water repellent microfibre cover so that even on wet days it will be comfortable. Manufacturer's Part Number: 80194500020
When winter really hits, temperatures drop and the rain begins to fall, the dhb Extreme Winter Gloves provide your hands with the total protection you'll need to keep riding. The hollow-fill insulation creates an insulated barrier against the cold, while the fleece lining is warm, soft and comfortable against the skin. The fleece and membrane also allow moisture to escape so you don't end up with sweaty hands. Foam padding on the palm absorbs shocks from rough roads, while silicone grippers on the index and middle fingers means you'll have total braking control.
Coming as a pack of three bolts, these are a genuine replacement for the original ones that came on your bike. Designed to hold your rear shock firmly in place on your NS Bikes Define mountain bike (MTB). Genuine NS Bikes replacement parts. Manufacturer's Part Number: NSP-3860 Multi Rainbow 3 pcs
Helping you achieve your off-road goals, this solid component has been finished with Funn's sandblasting process. This means you'll enjoy greater fatigue resistance against the elements and weather when taking on longer all-day epics in unpredictable conditions. What's most impressive is its extreme-performance material is shaped exactly like the Kingpin riser bars for immense durability as you dominate on every trail. Perfect for riders who want to go the extra distance, this is the ultimate choice of upgrade for all-year-round riding.
Whether it’s the latest e-bike or a favourite folder bike, as you’re enjoying skipping past traffic on your way from A to B, the Nightvision Electron Men's Jacket ensures that you’re both highly visible and nicely protected from the elements. Starting with visibility, this is enhanced first and foremost by the integrated light strips that adorn the back and shoulders. Powered by a removable power bank this offers up to 24 hours of bright illumination, drawing the attention of other road users. This is complemented by Altura’s highly reflective detailing, catching the eye when caught in the shine of vehicle headlamps. Then comes the outstanding weather protection. With 10k/10k waterproof and breathability ratings, the Electron not only enjoys keeping the rain out but ensures you won’t arrive at your destination soaked in sweat either. Fleece-lined front and sides are also present, locking in warmth when temperatures edge lower. Details such as easy to adjust cuffs, stowaway hood and the relaxed fit all make the jacket great to wear on or off the bike. And there’s also handy storage via the zipped chest and side hand pockets. The Electron Powers up your commute.