The ABEC3 6904 2RS raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: 2RS: Literally means the bearing has Two Rubber Seals. There are many types of seals. On most other bearings 2RS means that the seal is made from rubber and has one sealing lip rubbing on any flat part of the inner race. Enduro’s seals are usually either LLU (usually the MAX type bearings) or LLB (better for hubs). Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
Genuine replacement Tension & Guide Jockey Wheel Set. This brilliant set features a smaller top wheel which acts as a guide to set your chain onto the cassette sprocket. Furthermore, its larger bottom wheel keeps your chain held with optimum tension.
Restore your brakes to new condition with LifeLine Essential cablesets. As your cables corrode and wear, they can become stiff, gritty and less powerful. With corrosion resistant 19-strand stainless steel inners, precision brass ferrules, 3-core lined outer housing and cable O-rings, LifeLine Essential Cablesets provide a smooth, responsive action to help you get the best from your brakes. Tools Needed for InstallationCable cutters & crimps5/6mm Allen keys (for most Road/MTB brake sets)T25 Torx (Campagnolo® newer Record® & Super Record® calliper brakes)9mm spanner (some older pre-1980’s Road & MTB brakes)Depending on your brake configuration, consult your lever and brake manufacturer’s guidelines for correct fitting of cables, tools needed, and required torque settings specific to your particular braking system.
Suited to cross country, all-mountain and enduro riding, this front derailleur is durable and efficient. Plus, it's compatible with Shimano 7 and 8-Speed groupset components. Key Features: Mezzo Front Derailleur for 42T-34T-24T x 8/7 Speed Capacity: 18T Gear Teeth: 42T-34T-24T Chain Line: 50mm / 47.5mm Clamp type Φ34.9mm with Φ31.8mm adapter or Φ28.6mm adapter Shimano 7/8 Speed MTB Compatible Features: Series: Mezzo Model No.: FD-M20 Chain Ring: Triple Cassette Compatibility: 8 / 7 Speed Gear Teeth: 42T-34T-24T Capacity: 18T Route Type: Dual Pull Chainstay Angle: 66-69 Mount Type: Clamp Type Chain Line: 50mm / 47.5mm Band Diameter: Φ34.9 mm or Φ31.8mm adapter or Φ28.6mm adapter Front Clamp Band: Black Steel Rear Clamp Band: Black Aluminium Outer Link: Black Aluminium Inner Link: Steel Chain Guide: Chrome Plated Steel Weight: 143g Compatibility: Shimano 7/8 Speed MTB Compatible
The Shimano Deore M6000 E-Type 3x10 Front Mech features the renowned "Side-Swing" technology which seriously increases the mechs shifting performance, making shifting effortless when you're out on your bike. Thanks to the increased tyre clearance, the Deore M6000 provides stable, durable and quiet shifting, even under the most brutal riding conditions. The Deore M6000 E-Type 3x10 Front Mech is the perfect choice for conquering the trails ride after ride. Technologies: Side-Swing: With side-swing technology, the shift performance of the front derailleur can be increased by 90 percent. Specifically designed with modern trail bikes in mind, it provides 15mm of increased tyre clearance and its cable routing dramatically reduces the shifting effort. Features: Material: Outer Body: GFRP, Steel; Inner Body: Aluminium; Cage: Steel Gearing: 3-Speed (combined with 10-Speed) Chainline: 50mm Maximum Chainring Size: 42T Capacity: 18T Maximum Difference Between Chainrings: 10T Cable Pull: Front-pull Swing Action: Side-Swing Mount: E-Type (bottom bracket mount) Recommended Chain: HG-X 10-Speed chain Chainstay Angle: 66-69° Dyna-Sys compatible Body painted, cage plated 4 link bushings Smooth shifting and less cadence shock Close step (10T) Efficient cable routing Stable performance on suspension bikes Shifts consistently and runs quietly over rough terrain Custom plate design for single spike gear structure Chain catcher Only compatible with E-type frames
This conversion kit from Prime is a Genuine Prime conversion kit, which is designed for the Prime RD010 Center Lock rear hubs.
Specifically designed for use with your Rondo Rutt bike, this fork axle is made from a high-quality aluminium construction. This makes it an excellent back up when you need to breathe new life back into your suspension system.
The value of the LifeLine Front Mudguard is incredible. At a low cost, the amount of protection to yourself and your bike makes cleaning a whole lot easier.
This superb model is specifically designed to fit Hope Tech lever 3 pistons. Additionally, this genuine model is ideal for replacing your old or existing model for smooth braking performance.
Super lightweight butyl tube, even lighter than latex but not porous, so no need to reinflate every day. Can also be fixed with a normal puncture kit. The long valve inner tubes enables you to use deep section rims (40mm, 50mm and above) as the shorter valve would not extend out of the rim valve hole. Shorter valve inner tubes are ideal for wheels with rim depths of 24mm or 30mm. Presta valve tubes are most commonly used for road wheels (650c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commanly found on MTB wheels as valve is larger and won't fit through 650c rim valve holes. Weight: 51mm Presta Valve Inner tube - 90g Use: All purpose inner tube and excellent replacement inner tube for your road bike Material: Butyl tubes with renowned Vittoria quality Durability: Each and every inner tube passes a stringent 100% quality control inspection Threaded valve stem Use: All purpose inner tube and excellent replacement inner tube for your road bike Material: Butyl tubes with renowned Continental quality Durability: Each and every inner tube passes a stringent 100% quality control inspection Design: Seamless construction, with a mould-cured vulcanisation, to ensure uniform roundness and give a smooth ride and handling #Please note Be aware that when purchasing a 650c inner tube, tyre, or wheel from the Wiggle site that what you are buying is smaller than a more conventional road 700c inner tube, tyre, or wheel. Most road bikes nowadays come fitted, as standard, with 700c wheels (including inner tubes and tyres) and not 650c. A 650c inner tube or tyre WILL NOT fit a 700c wheel. Please read the 650c Wheel Sizing guide explaining the difference between 650c and 700c wheels.
Shorter valve inner tubes are ideal for wheels with rim depths of 24mm or 30mm but are not ideal for wheels with rim depths of 40mm or above (as the shorter valve would not extend out of the rim valve hole). Presta valve tubes are most commonly used for road wheels (650c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commanly found on MTB wheels as valve is larger and won't fit through 650c rim valve holes. 650c Wheel Sizing Be aware that when purchasing a 650c inner tube, tyre, or wheel from the Wiggle site that what you are buying is smaller than a more conventional road 700c inner tube, tyre, or wheel. Most road bikes nowadays come fitted, as standard, with 700c wheels (including inner tubes and tyres) and not 650c. A 650c inner tube or tyre WILL NOT fit a 700c wheel. Please read the 650c Wheel Sizing guide explaining the difference between 650c and 700c wheels. Based on ETRTO (European Tyre and Rim Technical Organisation) dimensions, 650c wheels are smaller than 700c wheels by about eight percent. Please, when on this page make sure you are buying the correct tyre size for you wheel. Check the sizing on your tyre before purchasing from this page. Tyre sizes tend to be printed on the sidewalls so please check before making a purchase.
The XT M8000 front derailleur sets a whole new standard for MTB excellence. Featuring a friendly design for full-suspension and big wheels, this high efficient model allows for improved driving and shifting performance. Seriously stable, you'll benefit from improved chain retention and more reliable shifting of the front system. This is the perfect choice of a replacement or upgrade for taking your off-road riding to the next level.
The primary use is fitting to bolt threads or bearings to prevent water ingression and seizing. The tube is easily stored and features a needlepoint applicator for accurate application.
Converts front hub to 12mm x 100mm through axle standard. Please Note: This part is only compatible with Prime front wheels with the centrelock type front hub.
The 15mm Frame Protector is quick and easy to use and includes a brake caliper shim. Simply remove your front wheel, place it between your forks, insert the skewer, and lock in place.
The 12mm Frame Protector is quick and easy to use, and includes a brake caliper shim. Simply remove your front wheel, place the 12mm Frame Protector between your forks, insert the skewer, and lock in place.
Made from a durable and dependable black CrMo, this front wide cog is an excellent addition to your electro-assisted gearing setup.
This valve adaptor set includes 10 French/Presta valve adaptors. Coming complete with rubber o-ring, these are designed for the easy inflation of Presta valves.
Genuine replacement Velcro straps from Gloworm.