The Extremities Mountain Toester Socks are a warm and durable hiking and expedition sock for cold weather conditions. A firm favourite with outdoor enthusiasts, they have a cosy and soft feel and feature Merino Wool that is naturally thermoregulating, odour-resistant, and moisture-wicking. Plus, a cushioned toe, heel, and sole, alongside built-in foot gripping, provides day-long comfort.
The Ronhill Tech Thermal 1/2 Zip Run Tee benefits from the use of a comfortable and lightweight fabric that's both highly breathable and fast-drying, so you remain cool, dry and distraction-free as you train. The front zip allows for venting to control body temperature especially later in the workout when you might get a little warm, while thumb loops enhance the fit and coverage when you're on the move. Finished with reflective detailing so you remain visible in low lighting conditions. This tee serves well as a base layer for your steady cool weather runs or is equally at home for more intense sessions in cold weather.
Made from Polylana® Fibre, the Extremities Contour Eco Polyana Waffle Beanie offers the same ‘wool-like’ hand feel and characteristics as acrylic fibre, but with a significantly lower impact on the environment. It is also complemented with eco acrylic yarn. Finished with a cosy waffle knit and turned-up trim for extra warmth.
Built from a sturdy CrMo steel, this dependably durable bar carries a huge 762mm width to let you ride with comfort and composure. With a wide range of backsweep and tall rise, easy movement and upright positioning is assured to keep you poised and prepared for your preferred BMX ride.
Developed over many years using innovative raw materials, Fenwick's have formulated a unique chain lube. Its ability to run in all conditions at such high levels of performance are unsurpassed. This chain lube will perform in the dry and in the wet. Longevity and efficiency are the key features resulting in an extremely smooth running chain. Ideal for road and off-road where performance is paramount. High Performance + Silent Running + Extremely efficient Directions for use: 1) Twist top cap to regulate flow 2) Apply a drop of lube to each roller 3) Rotate chain for 20 seconds 4) Wipe off excess with clean cloth 5) Leave to cure for 3-4 hours before use Top tip: For best results ensure the Professional Chain Lube is between 8C and 20C and apply to a clean chain
If you want to restore your Horizon CS pedal's peformance to its original level, this genuine replacement Nukeproof rebuild kit is sure to do the job.
Why eat CLIF Bar? Active individuals and athletes have high energy demands. With a mix of carbohydrates, protein and fibre, CLIF Bars supply working muscles with the energy they need for extended periods of activity. Thanks to their portability and great taste, CLIF Bars are a source of energy for athletes and active people who respect their bodies and the world around them. What is CLIF Bar? CLIF Bar is the original energy bar made with wholesome ingredients that deliver energy. CLIF Bars have whole ingredients you can see and taste, such as rolled oats, fruits and nuts. Each bar contains B6 and B12 which contribute to the normal release of energy for use in the body. The bars are also a source of protein and fibre. When should you eat CLIF Bars? For best results, CLIF Bars should be eaten about one to three hours before exercise along with water to prevent hunger and supply energy to working muscles. During prolonged, lower intensity exercise such as hiking or bike touring, CLIF Bars can be eaten during activity to help satiate hunger and meet carbohydrate demands. CLIF Bars can also be eaten as a snack between meals or during a long, busy day to help sustain energy. Expiration This product will be delivered to you with between 3-6 months expiry.
If it isn't cold enough for a full skull cap, or you know you'll be putting in some hard sweat-inducing efforts, then the Endura Pro SL Headband is the answer to keeping your head warm but dry. High-stretch windproof panels keep cold winds at bay while luxuriously soft Thermoroubaix® panels keep heat inside, as well as wicking away sweat quickly before it causes discomfort.
The HUUB Core Triathlon Top carries design features delivered from the extensive testing and research carried out by the HUUB athletes and designers. The latest fabrics, Coldblack® coating and race day nutrition security ensure you are equipped to maximise your race day potential. Coldblack® technology guarantees a minimum UPF 30 protection when applied to any textile in any colour without affecting the look or feel of the product.
This superb set of brake pads provide efficiently and strong brake power with minimal effort from your brake lever. Giving a consistent performance in both wet and dry conditions, these long-lasting pads are ideal for the regular, all-weather rider.
The Safety Resistance Trainer can be used in a multitude of ways with TPR handles that ensure a comfortable grip and allows for door attachment. The band allows you to stretch and train multiple parts of your body and is easy to use in the home or at the gym. The trainer’s tube is formed with Latex which is held inside a nylon protection sleeve.
This excellent pair of composite-covered, steel core tyre levers let you confidently remove and replace your tyres with ease. Featuring a steel tip for strength and precision when engaging with the tyre bead, these grippy and durable tools are the perfect size for your kit bag or toolbox. Park Tool TL-6.2 Tyre Levers An essential set of tools for roadside repairs or workshop maintenance, the Park Tool Steel Core Tyre Levers TL-6.2 (Set of 2) provide all the lift you need to get back on the road. Manufacturer's Part Number: QKTL62
The LifeLine Headset Cup Remover is simple to use and makes headset removal quick without damaging your frame. Instructions Start by securing your frame or bike in a workstand. Feed the closed end through the steerer tube until the splayed end opens inside the steerer tube. Make sure the splayed end of the tool is sat on the lip of the cup and hammer the cup out. When removing the tool follow the closed end down to protect the tool and repeat with the remaining cup. Tip: when hammering the cup out use a rag to catch the cup instead of sending it across the room.
Whatever mountain bike discipline you love, be it Enduro, XC, downhill or weekend trail warrior, the Ranger Cycling Gloves provide superb grip, easy dexterity and burly protection should you take a tumble. A snug fit ensures you get a natural feel of the bars and silicone prints ensures no slipping when grabbing your brake levers. The compression moulded cuff and hook and loop closure keep the gloves firmly in place and a micro-suede thumb is an easy way to wipe away sweat. The Ranger Glove continues to set the standard for performance, fit and value in an affordable and great looking MTB glove.
It converts geared bikes to single speed and bolts into most vertical dropouts in minutes, tensioning the chain is simple, the STS is then securely clamped in place. Designed to run with a geared chain, this limits the cost of going single speed on your existing geared mountain bike, remove your shifters and mechs, fit the STS behind your quick release (please note not for nutted axles) and your ready to ride. If you wish to use a specific single speed chain - then please consider the Tension Seeker 2 as it will work with either chain type. The STS is now available as a combo kit with the Single Speed Spacer kit.
Completely overhauling the design, the Speedo Biofuse 2.0 Goggles feature a patent-pending push button mechanism to quickly customise the strap length alongside an updated internal frame that is strong, flexible and adapts to your face for a secure and comfortable fit. Super soft seals with an updated groove work to enhance the fit while the improved lens shape gives an excellent field of vision. The lenses feature UV protection with a spray Anti-fog coating that keeps your eyes protected and ensures crystal-clear vision at all times.
A performance oil that comes with maximum lubricity
Following on from the success of the Nukeproof A15 durometer Sam Hill Series Grips, which Sam rode to overall EWS victory in 2017, Sam asked Nukeproof to develop an even softer compound for long days on the bike riding the toughest Enduro stages in the world. These are Sam’s special edition oil slick clamp version. Perfect for Enduro Racing Extra Soft Compound Sam has always been particular about his setup and Nukeproof has taken great pride in developing no-nonsense, custom products for Sam with some innovation even coming from his motocross bike! Together, they have helped to produce World level products that everyone can use. These grips were first used by Sam in round 4 of the 2018 EWS where he took the win and has been using them ever since. After that race he described the compound as “extra extra soft, semi throttle durometer” and described the grips as “pretty comfortable little things”. With comments like that we knew we were onto a winner with these grips.
Built with mesh panelling, the Asics Ventilate 2 in 1 Shorts allow air to circulate and quickly disperse heat when training on hot days so you stay cool and focused on your stride. The inner sprinter compression short gives good coverage and enhanced support during lateral movements, while reflective accents ensure you stay safe and seen when training in low lighting conditions.
Weighing in at a sensible 250g, the Tracker saddle strikes the ideal balance between lightness and comfort with a good amount of padding to ensure all-day comfort which is especially important if you ride a hardtail. The 277x142mm size is perfect for all mountain (AM) / enduro use and will suit the biggest range of rider sizes; being wide enough to provide great support and narrow enough to ensure that you can easily get your weight out and over the back wheel on a gnarly descent. The rounded shape prevents your clothes from getting snagged and the long flat and well-padded nose allows for comfy climbing when technical terrain requires more weight over the front wheel. MTB Saddle with ArcTech Suspension Technology Weight is kept down with Crn/Ti Alloy rails underneath as standard. These are connected to the shell via ArcTech suspension Technology: a system that allows for more base and rail flexibility, reducing trail buzz feedback to the rider. To further optimise comfort the Tracker features a high-density foam fill and a double-density nylon fibre injected base that is designed to flex under your sit bones and at the edges for pedalling efficiency. It also has a rising rear profile to support the pelvis and prevent back pain, a cut-out on the bottom and a channel on the top to relieve pressure on your sensitive bits and promote circulation on even the longest of rides. Kevlar Corners for Scuff Protection When riding hard, crashes happen and to keep your saddle looking good Ragley added Kevlar corners that are neatly tucked underneath to keep you dry and happy. The tough one-piece PU cover is stitch-free to prevent chafing and also helps to keep things watertight on wet and muddy rides. Finally, Ragley added an embossed Ragley Crest graphic design to the cover with colour coordinated graphics, bumpers and painted rails to give it a fresh and understated look. No soggy sofa, this is a performance perch built for knocks, spills and all-day comfort out on the trails. Manufacturer's Part Numbers: 5056305578756 Grey Silver 5056305578763 Black 5056305578770 Green 5056305578787 Blue