Off-road: Riding at lower pressure means better performance ... but at the same time, it increases the risk of failures. The limit so far is at about 20 psi, below which it’s hardly possible to dare to ride normal MTB tyres. But nothing stays the same: In the future, air pressure can be controlled in the tyre‘s double chambers. In the outer chamber, the air pressure is extremely low - ideal for maximum off-road performance. In the inner chamber, directly on the rim, there is high air pressure – even a very strong impact cannot dent the rim edge. At the same time, the inner high-pressure system secures the tyre onto the rim. “Burping”, the dreaded loss of air at low pressure in conventional tubeless systems, is impossible. The Name PROCORE is derived from "Progressive Core". The core (internal high-pressure chamber) progressively absorbs even the hardest impacts. Compatibility You can mount Procore with any tubeless compatible MTB tyre. The system is available for all three MTB wheel sizes (26", 27.5", 29"). Weight approx. 200g per wheel. Compatible with all wheels, independent of the brand. Minimum inner rim width: 23mm. PROCORE is a joint development of SCHWALBE and SYNTACE. PROCORE - the outer chamber The outer chamber is tubeless. Therefore, any tubeless compatible MTB tyres can be used. The tyre is filled with some liquid sealant (approx. 60ml) and should be at least 57mm (2.25") wide. PROCORE - the inner chamber Two special Procore components form the inner high-pressure chamber: the special Procore tube and the Procore inner tyre. This "core" is extremely high-pressure stable and at the same time very light. The Rim Of course, the rim must be tubeless compatible and sealed with a tubeless rim band. It should have an inner rim width of at least 23mm. The wider the rim, the easier the installation and the better the performance under low air pressure. The very wide Syntace rims are a perfect fit. The PROCORE Valve The patented dual valve of the Procore tube distributes the air into both chambers. The upper part of the valve is a selector. With a simple turn, you select whether air is pumped into the inner or the outer chamber. (Valve sold separately). The PROCORE Air Guide The small red component made of white plastic ensures that the air can flow past the inner high pressure chamber into the outer low pressure chamber. - Tyre pressure can be reduced to a minimum 14 psi, thus providing a huge amount of grip. Even on the roughest terrain tyres “stick” to the ground. - Due to the extra cushioning and traction there is much better steering, braking and traction control. - No more risk of snake bites. The rims are extremely well protected from denting. - Even in the toughest conditions, significantly lighter tyres can be used. - Excellent emergency running characteristics due to the internal high-pressure air chamber.
The Muc-Off Tyre & Cassette Brush is best used with Muc-Off's Nano Tech Bike Cleaner on the affected areas. Then agitate with the Tyre & Cassette Brush and rinse clean, followed by a fresh dose of chain lube.
The lenses are anti fog and anti scratch and come as a 3 pack- clear, low light yellow and dark. The lenses come film wrapped to ensure they remain fresh and scratch free until you're ready to ride..
This drop handlebar features a tough aluminium construction, which makes it more than capable of withstanding all the abuse that comes with a long day out on the road. ZZYZX has also equipped this road-ready drop bar with comfortable modern geometry, which makes changing your riding position as easy as possible. This makes it a perfect choice of upgrade for riders who enjoy clocking up the miles with a durable handlebar keeping them in control.
Easy and Hassle-Free Pressure Adjustment Featuring a pivot head to make pressure measuring easy and hassle-free. You simply press the gauge onto the valve head and within 3 seconds you will have the precise value of the pressure within your tyre. It features a 'Calculation Mode' for measuring the maximum pressure of a sealed tyre and an 'Adjustment Mode' to measure the inflation of a tyre and also to determine if a tyre is losing pressure. This gauge features a bleed valve should you notice you have overinflated slightly and need to adjust the pressure; you no longer need to remove the gauge from the valve and can simply release increments of air to fine-tune the pressure value.
Stay safe on your cycle commute and winter training rides. The LifeLine Aero Beam rear light is designed to help make you visible to other road users in darkness and low light conditions. 16 red LEDs provide a powerful beam with high visibility from the rear and sides. 5 beam modes let you choose how best to be seen, from eye catching flash and pulse modes, to super bright high beam mode. The narrow body matches the profile of your seat tube for a clean look and the silicone strap provides a secure fit without an unsightly mounting bracket. Charging is delivered via a convenient micro USB port, protected by a water-resistant silicone cover. A full charge from empty takes approximately 2-3 hours. Battery Life: High Beam: 1.5 Hours Low Beam: 6 Hours Pulse: 6 Hours High Flash: 24 Hours Low Flash: 27 Hours
Developed for a wide range of riding disciplines from mountain bike (MTB) to cross country (XC), these grips offer a fantastic balance of comfort, stability and control wherever your next adventure takes you. They feature a ProTaper logo grip pattern that's supportive for your palms as you conquer the more demanding of terrain conditions on your ride. Coming equipped with a single lock-on clamp, these are easy to secure in place and are designed to fit 22.3mm handlebar diameters. When clamped in place on your handlebar, they provide a strong and secure hold for slip-free steering performance. Sold as a pair. Manufacturer's Part Number: 361-37218-K001 Black
Whether you ride with gloves or without, you'll enjoy consistent and reliable grip in all conditions, plus their ultra-durable compound is durable enough to last through many seasons of abuse. The double lock rings ensure they stay in place, no matter how hard you're pushing yourself.
This 100% synthetic oil grease coats ball bearings and races, preventing wear and distortion in headsets and bottom brackets, even in brutal down hill racing and over extended periods of time. Chosen since 1988 by more top pro teams as the slickest, toughest bicycle grease available. No matter how hard or long you ride, Finish Line Premium Grease will provide the lubrication your bearings require.
dhb have designed their Women's Short Sleeve Seamless Base Layer with functional knitted zones to provide wicking, venting and increased stretch in the areas you need them most. This base layer also benefits from a high level of moisture-management, meaning the fabrics draw sweat away from the skin quickly to keep you feeling drier and fresher on your ride. The dhb Seamless Short Sleeve Base Layer is designed to provide a supportive and ergonomic fit with a high level of stretch. Thanks to the elimination of seams around the body, the base layer follows the natural contours of the shoulders for increased comfort, reducing friction and chafing when training. Paired with different weights of jersey, this is a versatile base layer suitable for all but the hottest of days.
An ultralight road inner tube which comes in three Presta valve sizes to suit your preferred wheel rim depth (40mm, 52mm or 60mm), it weighs a mere 70g and is constructed with the quality expected of such a renowned manufacturer.
Designed for use with SPD compatible shoes and compatible with all Shimano SPD pedals.
dhb have designed their Short Sleeve Seamless Base Layer with functional knitted zones to provide wicking, venting and increased stretch in the areas you need them most. This base layer also benefits from a high level of moisture-management, meaning the fabrics draw sweat away from the skin quickly to keep you feeling drier and fresher on your ride. The dhb Seamless Short Sleeve Base Layer is designed to provide a supportive and ergonomic fit with a high level of stretch. Thanks to the elimination of seams around the body, the base layer follows the natural contours of the shoulders for increased comfort, reducing friction and chafing when training. Paired with different weights of jersey, this is a versatile base layer suitable for all but the hottest of days.
Engineered from quality materials and treated with protective chrome plating, this cassette shifts smoothly while also resisting corrosion and rust. Key Features: Cassettes for 10 Speed Chrome Plated Sprockets Gear Ratios: 11-32T: 11-12-13-15-17-19-21-24-28-32 11-34T: 11-12-13-15-17-19-21-24-28-34 11-36T: 11-13-15-17-19-21-24-28-32-36
Body Glide (skin protection balm) is ideal for bras and sports bras, and sensitive areas where rubbing from your undergarments and clothing is irritating or causes chafing. Body Glide is also great for your feet as it comes formulated with Vitamin F Forte that helps keep skin soft and moisturised. Around your bra, on your thighs and feet, the plant-derived ingredients create a natural barrier to moisturise your skin, allowing it to breathe and perspiration to escape, while helping guard against irritation, chafing and blisters. Body Glide is easy to apply and comes in a clean and tidy container. Prevention Prevention is easier, faster, and costs less than buying first aid supplies, and waiting for recovery. The risk of rubbing is that it wears away your skin. A little may not matter much. But it does as minor irritation or rash advance to chafing, blisters, raw skin, and sometimes an open wound. You may be left with scarring. In the worst cases, the body is open to infection. Stopping skin irritation before it starts is the best way to control risk, maintain healthy skin and stay pain free. It’s why more people turn to Body Glide. Invisible Comfort Body Glide products stay right where you apply them, and do not block your pores. They allow perspiration to escape, vital to regulating your body temperature. The ingredients are plant-derived, many are custom blended natural waxes, and they don’t use cheap petroleum (petrolatum), mineral, vegetable oils, lanolin or any animal products or testing. To put it another way, Body Glide won’t offer you messy lotions, untested potions, or greasy, ineffective jellies. Directions for Use Before putting on your clothes, apply the Body Glide Anti-Chafing Balm for Her, directly from the stick, to your inner thighs, under arms, around the area your sports bra rubs, and wherever else your skin is sensitive to rubbing. Only apply to intact skin. Use before sporting activities or anytime to protect skin. Wash off with mild soap. Ingredients: Caprylic/Capric Triglyceride, Cetearyl Alcohol, Ozokerite Wax, Glyceryl Behenate, Stearyl Alcohol, Allantoin, Cocos Nucifera (Coconut) Oil, Prunus Dulcis (Sweet Almond) Oil, Tocopherol (Vitamin E), Vitamin F (Glyceryl Linoleate, Glyceryl Linolenate). Allergen Information: The Anti-Chafing Balm for Her isn’t suitable for those with nut allergies. The balm contains sweet almond oil.
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
Foaming Chain Cleaner is a real innovation in bike maintenance. Utilising Fenwick’s cleaning superiority, chain cleaning has never been so easy. Fenwick's Foaming Chain Cleaner makes chain cleaning part of your bike wash routine, instead of a laborious 2nd job that never gets done. With its simple mess free application, there is very little waste as only 5 to 10ml of product is needed per clean and it is biodegradable too. Foaming Chain Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use. To make the process even easier just use the Chain Cleaning Sponge to scrub the chain and the Gear Brush to agitate the cassette, jockey wheels and chainset. The cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces. Directions for use: 1) Place the chain in middle gear for ease of use 2) Whilst turning the crank spray Foaming Chain Cleaner directly on to chain 3) Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwick’s BIKE CLEANER 4) For best results run the chain through the Fenwick’s CHAIN CLEANING SPONGE, specifically designed to agitate and, importantly, capture the chain dirt for a cleaner clean 5) Rinse thoroughly with clean water Top tip: As a water soluble degreaser Foaming Chain Cleaner can be used on delicate parts
Simple and sleek the tool stash has an internal mesh that keeps your essentials in place. It will fit snuggly in a regular size bottle cage.
Ideally used for tethering your bike to car racks or keeping bags and luggage reliably attached to your pannier racks, this Design & Innovation Award-Winning cable can be used for a variety of security purposes. The double locking mechanism and steel inner make the Z LOK extremely hard to break, with the universal key adding further protection against theft or your items coming loose.
Compatibility: SRAM 2017+ brakes & RockShox Reverb 1x remote with Bleeding Edge™ bleed port Please Note: This bleeding kit is not compatible with the more modern RockShox Reverb dropper remotes which use the "Connectamajig" type connection