The two prong brush excels in getting into hard to reach areas of the bike - ideal for spokes and discs, cranks and pedals. Explore the Muc-Off brush range to find out which is best for each part of the cleaning process, and which are best to use on different parts of the bike.
This glue and sealant remover is equipped with a non-aggressive proprietary formula that helps remove rim tape glue, sealant or tubular glue residue from inside rims (and many other surfaces) prior to applying Muc-Off Tubeless Rim Tape (available separately). Muc-Off has made it easy to use thanks to its spray-on aerosol design that's safe to use on most metal, plastic and carbon fibre surfaces. Ideal for keeping in your home workshop for when it's time to carry out maintenance on your wheelset. Going Tubeless Muc-Off Glue & Sealant Remover is the perfect companion for preparing your rims for a tubeless setup. Removes Sealant Residue The non-aggressive formula is perfect for removing stubborn rim tape glue and sealant residue prior to applying Muc-Off Rim Tape. Removes Sticker Adhesive It’s also perfect for removing sticker adhesive from your bike – whether you’re building your bike straight out of the box or just switching up your decals! Easy to Use The Glue & Sealant Remover comes in a handy spray aerosol which makes it super easy to dispense directly onto your rims whilst you work. Manufacturer's Part Number: 20130 200ml
The Tyre Boot Kit is a cyclist’s must-have if it all goes wrong. The kit features 8 varied cuts of thin, durable and tear-resistant Hypalon, specifically designed for covering sidewall and tread tears on any tubed tyre. A tube of glue is included to help mend the trickiest of tears and a double-sided velcro retention strap keeps things compact and pack-friendly. A simple solution to get you out of a sticky situation.
Helping to provide an improved rate of support to the foot so you can push off the mark more efficiently, the X-Lock technology works to boost the arch and ankle areas. The ergonomic foot improves comfort and fit while there is maximum cushioning to assist with heel impacts. Extremely breathable thanks to the mesh panels, the Vectr Cushion No Show Socks also use Polygiene technology to help avoid the build-up of bacteria and odours.
The Gloworm Universal bar mount enables you to lock your Gloworm into place using the thumbscrew and nut provided. The mount features a specially designed locking tab to prevent the light from slipping so is perfect for those wanting a rigid light position particularly when riding rougher terrain.
The Gloworm universal light mount screws to the 4-bolt pattern on 2017 and newer Gloworm light models. The Universal Light Mount is compatible with the universal helmet mount or universal bar mount and can also be used on any standard GoPro style thumb screw mount.
The fully adjustable Gloworm Headstrap allows you to mount the Gloworm Alpha, X2 or XS using the Gloworm Quick Release Helmet Mount (Can also be used with a GoPro Camera) or Universal Helmet Mount. Featuring comfortable and durable elastic straps, the Gloworm Headstrap will securely hold your light and battery pack wherever you venture. Designed to be used with the Gloworm 2 Cell battery, however, it can also be used with 4 cell batteries using the battery strap as provided with each light set.
Engineered specifically for the 2020 Nukeproof Reactor Alloy 275 and 290 models, this genuine Nukeproof protector provides an exceptional barrier against mud, muck and riding mishaps thanks to their durable moulded silicone construction. It attaches to your frame's downtube via its 3M adhesive backing and offers outstanding protection against all types of dirt and damage.
From the minute you start using FS-10, you’ll know that something is very different. Not only do the natural ingredients smell nice, but they also enhance the performance of FS-10.
Giving you incredible torque power, this single speed champion is specifically engineered for top performance. It also features a patented Rust Buster anti-rust coating which has passed KMC's strict 500 hour salt spray test. As a result, you'll be able to enjoy the benefits of superior defence against the most unpredictable of riding conditions as you ride. To top it off, its high pin design provides you with a quieter riding experience which makes acceleration as smooth as possible.
Specially designed for current 2016-2018 Nukeproof Mega Alloy 275 and 290 models, the Mega Alloy - Downtube Protector is perfect for keeping your bikes framework free from damage. Made from moulded silicone construction for years of long-lasting protection against mud and dirt. Keep your downtube in peak condition from scratches, scores and scrapes thanks to this easy to apply shield. After a long day out on the trails, you can only expect stone rebounds and dirt backlash from riding the trails, so the Mega Alloy - Downtube Protector will give you a strong and durable solution for defending against all that the elements throw at you. Easy to apply thanks to the 3M adhesive backing, you can effortlessly install this helpful tool to protect your bike ride after ride. The Mega Alloy - Downtube Protector from Nukeproof is the perfect choice to keep your bikes framework safe from mud and dirt in even the most extreme conditions, all year round.
This Bleed Kit Liqui Moly DOT 5.1 hydraulic disc brake fluid is compatible with all Avid, SRAM, Formula, Hope and Hayes road and mountain bike (MTB) bike disc brakes.
High quality butyl tube ideally suited for Racing. The Supersonic version offers the lowest rotating weight within the MTB 26" range, therefore helping to increase your speed and efficiency.
Compact and Lightweight Cateye’s Wearable Mini is built to be small and convenient weighing just 12g making the light easily transportable. Mounting For quick and convenient mounting on the go the light comes with a rubber band mount that allows you to connect the light to seat posts, helmets, or clothing. Light Mode The light comes with three different light modes which can easily be switched between by holding down the back button. Mode One (Constant): 60 hours battery life Mode Two (Slow Flashing): 550 hours battery life Mode Three (Rapid Flashing): 140 hours battery life
Fenwick's Disc Brake Cleaner’s triple solvent formula is designed to clean a wide range of contaminants. The product has been engineered to give a slightly slower evaporation time, thus allowing for a better, deeper clean, resulting in a dry, fully degreased finish. May improve braking performance and reduce brake squeal. Directions for use: 1) Initially, spray from a distance of 20cm to wet down the surface to be cleaned – use short blasts 2) Leave for 10 seconds 3) After surfaces have been wetted, blast away contaminants by moving the aerosol closer and using prolonged bursts. Catch residue with an absorbent cloth Top tip: If used as a chain degreaser re-lube using a Fenwick’s chain lube
Simply spray the Rain Shield Re-Proofer on a garment and you'll enjoy restored factory-level waterproof performance within 24 hours of application. The waterproofing technology reduces surface tension, letting water bead and roll off the surface. You'll also find it protects against mud and ground-in stains. And not only that, but it won't compromise the breathability of your garment either. It achieves all this protection while being safe for the environment, thanks to a water-based and PPCF-free formula. How To: 1. Shake the bottle well before use to activate the formula. 2. Spray all over a clean, damp garment from 10-15cm away until the garment is fully treated. (Recommended using a technical performance wash to clean the garment before application. Always follow the washing instructions on the label.). Muc-Off recommends spraying in a well-ventilated, dry area. 3. Remove any excess treatment with a clean cloth. 4. Allow treatment to cure. Air dry by hanging up and leave to dry overnight before wearing the garment in wet conditions again. 5. The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so it's recommended to refresh the coating every 3 months depending on wear and washing. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with a re-proofer. Best applied to a clean, damp garment for optimum results.
The Hilly Active Zero Cushion Socklet is an ultra-lightweight performance sock Supersoft Tactel® micro yarn knitted onto soft Tactel® yarn, forming a microlight two-sided fabric. Superfine mesh at the top lets air penetrate and disperse heat so your feet don't overheat, while an antimicrobial fabric treatment keeps your feet fresh and free from odour. Arch grip delivers a great fit and hand-linked flat toe seams eliminate and chafing or irritation so you stay comfortable and focused. Care Instructions Machine wash warm. Hang out to dry. Do not iron. Do not bleach. Do not tumble dry. Do not use fabric conditioner. Wash before use.
The Hilly Active Zero Cushion Anklet is a lightweight performance sock with a two-sided fabric that quickly wicks perspiration to keep your feet dry. Superfine mesh at the top lets air penetrate and disperse heat so your feet don't overheat, while an antimicrobial fabric treatment keeps your feet fresh and free from odour. Arch grip delivers a great fit and hand-linked flat toe seams eliminate chafing or irritation so you stay comfortable and focused. Care Instructions Machine wash warm. Hang out to dry. Do not iron. Do not bleach. Do not tumble dry. Do not use fabric conditioner. Wash before use.
Thanks to ultra-thin walls, the Castelli Water Bottle weighs in at a featherweight 53 grams. Holding 550ml of fluid you can keep hydrated on rides both long and short, with a soft rubber nozzle making it easy to drink from. The wide opening makes it easy to fill too, getting your favourite hydration/energy powder in with ease and then clean after.