This high-quality MTB rim features an asymmetrical carbon rim design, which makes it lighter overall, more impact resistant and laterally stiffer while remaining vertically compliant. This makes it a great choice of upgrade for trail, cross-country and enduro riders who want a strong and dependable rim that won't add any unnecessary grams to their ride. With reinforced spoke beds, proven 4D angled spoke hole drilling and a 30mm inner rim width, this model is incredibly durable as you tackle whatever the off-road terrain has to offer. Lightweight Carbon MTB Rim WTB's flagship CZR carbon rim delivers minimal rotational weight and fine-tuned compliance to make you feel at one with the terrain. Reinforced spoke holes, TCS 2.0 technology, an asymmetrical design and two years of development make it one of the most dependable carbon rims on the market. CZR rims set themselves apart from the pack by providing unbeatable strength and ride quality at a more affordable price. Sold individually. Technologies: TCS 2.0 Technology: Built upon WTB's proven Tubeless Compatible System, TCS 2.0 introduces a more robust, easily installed, and dependable tubeless system. A recessed channel along the centre of TCS 2.0 rims allows for the installation of the Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tyre and rim. Once the Solid Strip is installed, TCS Tape is then applied to provide the airtight seal needed for a reliable tubeless system. Manufacturer's Part Numbers: W020-0607 Black 28H 29" W020-0608 Black 32H 29"
The new SRAM Force 22 ErgoDynamic™ Shifters were modeled after the best in class comfort of SRAM RED, and represent the most advanced thinking yet on perfecting the interface between rider and bike. Everything received the same detail, including the transition between handlebar and hoods, the grip texture, finger wrap, and the separate interfaces with both the shifter and brake lever. The understated black finish makes it look fast and a perfect match for any machine. Weight: 307g (Pair)
This Aerohead™ MIPS cycling helmet takes the same wind-cheating silhouette as the leading-edge Aerohead Ultimate but adds increased ventilation to keep triathletes and time trialists cool when the competition is hot. By using a polycarbonate shell, Wind Tunnel™ ventilation and internal channelling, this helmet is proven to boost cooling power while remaining aerodynamic. Additionally, Aerohead™ MIPS features a wrap-around eye shield that offers an impressive field of view with the convenience of a magnetic anchor attachment to allow easy storage of the lens in the “flipped up” position – Perfect for fast swim-to-bike transitions. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Lens by Zeiss® Optics shield with magnetic attachment the wrap-around eye shield offers an unblocked field of view with a huge aerodynamic benefit and the shield is made by ZEISS® Optics for unrivalled clarity. A magnetic anchor attachment keeps the shield secure, yet easy to remove, and it can be stored in the “flipped up” position. In-Mould Construction In-mould construction fuses a tough polycarbonate outer shell with the helmet’s impact-absorbing foam liner. The fusion process allows Giro to sculpt better ventilation systems, so In-mould helmets can be lighter and cooler than traditional helmets. Roc Loc® Air Fit System This revolutionary fit system improves helmet performance by enhancing cooling, as well as fit comfort and stability. Using a patented design that suspends the helmet just slightly off the top of the skull, Roc Loc® Air allows cool airflow to pass directly over your head, further enhancing the performance of vents and internal channelling that exhaust heat out of the helmet. Fit and feel adjustments mimic the Roc Loc® 5, allowing you to easily custom tune fit tension and fore-aft tilt of the helmet in seconds using a single hand. Super Fit™ Engineering Proprietary Super Fit™ sizing system is based on “human scale factors” data and over 25 years of handcrafting helmets. By creating helmet moulds in up to 4 adult sizes to match the human body’s form, Super Fit™ sizes comfortably and securely to fit riders and feel like they are custom made just for you.
The successor to the class-leading Aether cycle helmet, the Aries Spherical Helmet (MIPS) is lighter, cooler and has a more compact form factor that gives a streamlined performance and sleek aesthetic. It's Giro's premium helmet designed to cover the heads of all cyclists. From World Tour riders to weekend gravel adventurers to chain-gang smashers, it's a helmet you'll love to wear. Spherical Technology powered by MIPS® (Multi-Directional Impact Protection System) The Aries Spherical Helmet (MIPS) exceeds stringent safety standards thanks to the combination of cutting-edge safety technology. It starts with Giro's ball and socket Spherical Technology™, powered by Mips®. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Progressive Layering™ The Aries also benefits from an in-mould construction and Progressive Layering™. A tough and durable outer shell covers a two-layer impact-absorbing core. With one layer dealing with high-speed impacts and the other with low-speed impacts, the Aries addresses both those low-speed tip-over spills and more adrenaline-pumping crashes that happen when the brakes are off. Cool. Fast. Fresh. With a total of 24 vents, the Ariel is one cool cycle helmet. The Wind Tunnel™ vents are optimised for boosting cool airflow and yet minimising aerodynamic disruption. The Aura Reinforcing Arch has allowed Giro engineers to create large vents, pushing airflow to sensational levels, while also boosting structural integrity. Inside, carefully designed channels create a rush of cool air across your head. Even with great airflow, you'll still generate sweat during particularly intense rides, training and racing. However, thanks to the DryCore™ brow pad and Ionic+ anti-microbial padding, moisture is quickly wicked away. With its permanent anti-microbial performance, you'll also enjoy the freshness and itch-free comfort whenever you ride. Roc Loc® 5+ Air Fit System For easy adjustment, you'll enjoy the benefits of the Roc Loc® 5+ Air Fit System. This provides an unmatched level of comfort, stability, adjustability, and minimal weight. You can easily dial-in both fit tension and adjust vertical position with a single hand. It's the ultimate in skull-hugging luxury.
This high-quality saddle features a hard-wearing Fibra-Tek cover construction, which makes it more than capable of enduring the increased pressure that's associated with training and competing. Selle Italia has also equipped this model with +10mm longer carbon rails (7x9mm), to ensure lightness, resistance and a wider range of regulation of the saddle. Another highlight is this saddle's Superflow technology, which uses its central cut-out to drastically reduce all physical limitations caused by prolonged pressure in the perineal area. As a result, you'll benefit from a more comfortable and composed riding position when pedalling. Revised Tip Shape The SLR Boost features an even more accentuated front exhaust which allows to further increase comfort during the push phase and to make the most of the characteristics of the saddle. Anatomic Shape The perfect anatomical product for those who want to maximise their performance without sacrificing comfort. Superflow The “Superflow” central cut-out allows you to release the pressure from the central area and benefit from greater comfort when pedalling. Manufacturer's Part Numbers: 041A620ICA011 Black S S3 041A920ICA011 Black L L3
This XC-focused wheelset comes equipped with a welded rim construction that delivers a light and strong profile that's also perfectly sealed. Ready for racing, its tough Maxtal aluminium build makes it highly durable when charging across demanding terrain conditions, while its 24 double-butted spokes provide dynamic and agile rotative performance. Mavic has also kitted out this model with tubeless ready technology, making it easy to ride tubeless and benefit from increased comfort and control. Tubeless Ready XC Wheelset with Hookless Profile The name Crossmax has a long history in the world of XC riding and racing and this updated wheelset lives up to its name with many of the same features and technologies as pro-level XC race wheels, but at a far more attainable price. One of the key factors is Mavic's UST technology, which allows for easy setup of tubeless-ready tyres and gives you all the associated benefits including better traction and control, a smoother ride quality, and a reduced risk of punctures. The rim is welded for added reliability and features a 25mm internal width with a hookless profile. Infinity Hub and 6-Bolt Disc Brake Compatibility The Infinity lighter hub design optimises lateral stiffness and spokes tension. Mavic's Instant Drive 360 freewheel with a double ratchet system provides fast engagement and top-level reliability. The Crossmax also comes kitted out with 6-bolt disc brake compatibility, so you can enjoy powerful and consistent braking performance when charging across the XC course. This wheelset is available in either standard or Boost axle spacing. Please choose the option from the menu to match your setup. The wheelset is delivered with valves, replacement spokes and accessories. Additional Item Top Features: Rims Drilling: Traditional Valve Hole Diameter: 6.5mm Internal Width: 25mm ETRTO Size 27.5" Option: 584x25TSS; 29" Option: 622x25TSS Use with Mavic Tubeless Tape Asymmetrical rim design UST Tubeless Ready SUP Hookless profile Spokes Material: Steel Shape: Straight pull, flat, double-butted Nipples: Steel, ABS Count: 24 front and rear Lacing: Front and rear crossed 2 Hubs Infinity Hub Instant Drive 360 QRM Auto Freehub Compatibility: Multiple options available to select Intended Use ASTM CATEGORY 3: Cross Country For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg, bike included Recommended Tyre Sizes: 50mm to 76mm (2.0" to 3.0") Delivered With UST valve and accessories Pre-installed tubeless rim tape 2 replacement spokes with each wheel Technologies: Instant Drive 360 Freewheel Technology: The new Instant Drive 360 freewheel system is super light and fast to engage with only 9°. A large contactless rubber seal provides low friction, while a wide array of end caps makes it super versatile. UST Tubeless Technology: Traction and control Universal Standard for Tubeless. Ready to ride tubeless system. The UST concept improves traction, control and comfort whilst reducing inertia and flats. SUP Welding Technology: Stronger and smoother joint Soudé Usiné Process. After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish. QRM Auto Bearing Preload Technology: Qualité de Roulements Mavic Auto Our latest innovation. Those cartridge bearings are of course double sealed with C3 internal clearance. Their preload is automatically adjusted to guarantee a perfect spin with no play on the long run. Manufacturer's Part Numbers: P1669115 Black 27.5" Shimano P1665110 Black 27.5" Boost Shimano P1666110 Black 27.5" Boost SRAM XD P1638110 Black 29" Boost Shimano
With its strong and lightweight aluminium Triple Triangle frame construction, this bike is suited to trail riding, bike park sessions and long days exploring all-mountain terrains. Plus, it features GT's progressive geometry, SR Suntour suspension forks and a Shimano 3x7-Speed drivetrain to encourage you to take on the most exciting of routes while tackling any challenge. SR Suntour Suspension and Shimano Tourney 3x7 Drivetrain Equipped with a terrain smoothing SR Suntour M3030 front fork, this Aggressor model makes the most of its 75mm travel to absorb every impact you encounter as you ride. GT has also installed a 7 speed Shimano Tourney drivetrain and an All Terra crankset to this version for a smooth-shifting and speedy performance anywhere on the mountainside. WTB SX19 Rims and Ranger Comp Tyres Perfect for tackling mixed terrain conditions, this powerful hardtail rolls on a pair of WTB SX19 rims which are wrapped in WTB Ranger Comp tyres for stable and dependable riding experience. Plus, this bike is topped off with a set of mechanical disc brakes for superb all-weather braking control. The GT Aggressor Sport Hardtail Bike is a perfect choice of upgrade for riders who want a stronger and more reliable hardtail. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
Ready to conquer the challenges associated with road cycling, this rear derailleur is equipped with a tough aluminium build and wireless technologies for greater precision, customisation and control wherever your road bike takes you. Its durable aluminium construction makes it more than capable of handling the changes to the terrain conditions and the consistent gearing that comes with it on your travels. SRAM has also kitted out this model with high-quality steel pulley bearings and larger X-Sync pulleys, so riders can enjoy increased strength and efficiency. Another benefit is its Orbit chain management technology, which makes shifting easier and quieter as you clock up the miles. Road Bike Rear Derailleur with AXS Wireless Connectivity If your ride doesn’t feel complete until you get a little dirt on your tyres, you know the importance of capable components that can tackle anything. The Force XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal assurance. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup and reliability - Orbit chain management technology keeps the drivetrain quiet and secure - 1x specific for use with 10-44 XPLR and 10-36 cassettes - SRAM AXS enabled, allowing easy personalisation - Larger X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries Technologies: AXS Enabled: AXS is SRAM’s bike component integration system that connects electronic bicycle components and software. Control: AXS lets you connect your AXS-enabled components to a mobile app, where you can assign custom actions to your controls. Everything speaks the same language, and you can even combine road and mountain bike parts to build the party bike of your dreams. Personalise: Wireless controls open the door to new levels of customisation. With AXS, you can personalise your component behavior to match your riding style and preferences. Turn on enhanced shifting modes, or reassign shifting actions. Measure: The AXP Mobile App and AXS Web allow you to monitor your bike’s performance and readiness. It’s an easy way to keep tabs on your battery levels—including the CR2032 batteries in eTap shift levers—and keep AXS component firmware up-to-date. AXS Web analyses your ride files specific to shifting, gear use, power zones, and tyre pressure, so that you can quickly and easily learn more about how your bike is working for you and consider adjustments. X-Sync: SRAM X-SYNC chainrings provide the highest level of performance and durability. The SRAM X-SYNC tall square teeth edges engage the chain earlier than traditional triangle-shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC chainrings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC rings are an integral part of the SRAM 1x drivetrain. Accept no imitation. Orbit: Orbit technology is an innovative form of derailleur motion control. It utilises silicon fluid as part of an elegant and ultra-lightweight damper system. Compared to a standard friction clutch system, Orbit technology places no additional resistance on the rear derailleur’s spring when under slow or light movement. This means easier shifting and rear wheel removal. And while riding, the fluid damper reduces chain bounce. Manufacturer's Part Number: 00.7518.158.000
Optimised for use with caliper brakes, the Futura features a tapered steerer for enhanced control as you weave around your chosen route. Durably built to cope with all weather conditions, it is equipped with asymmetrically reinforced areas and enhanced torsion control to make sure no ride is too intimidating for you or your bike. An excellent addition to any modern road bike, the Futura is a top performing fork for the fast and focused rider.
The Oversized Pulley Wheel System for SRAM Rival AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting, for maximum efficiency. The handbuilt OSPW System has two spring tension settings, that allow customised setup based on riding conditions. As with all other CeramicSpeed products, this new OSPW System has been thoroughly tested. Besides thousands of test kilometres among both professional and amateur riders, CeramicSpeed's Founder and CEO has spent more than 5.000 km in the saddle, testing the product. With the guys from R&D following him closely and listening to his feedback from every single ride, we can proudly say that no details are left un-tested. Since its introduction in 2015, the CeramicSpeed Oversized Pulley Wheel System has been through 13 unique derailleur compatibility developments. No other pulley system has the depth of use and trust as the CeramicSpeed OSPW, which counts both Men’s and Women’s Triathlon World Champions, World Tour professional road teams, XCO professional MTB Teams, and elite athletes worldwide as its users. The aluminium CeramicSpeed pulleys come in both coated and standard versions (see multiple options in the selection menu at the top).
Boasting a strong Maxtal aluminium rim construction, this road wheelset offers a fantastic combination of strength and durability as you clock up the miles on your road bike. Its robust build ensures that it's more than capable of handling the demands associated with long days on the road, while its ride-enhancing technologies provide smooth and consistent rotative performance. The Ksyrium 30 Disc is a perfect entry point into high-level race performance. UST Tubeless Ready Technology This updated UST Road Tubeless system delivers a smoother ride and improved puncture resistance while retaining a lightweight feel for climbing and accelerating. By removing the tube, Mavic also removed friction, so there’s less rolling resistance, which means it requires less energy to reach higher speeds. 30mm Deep Rim Profile The 30mm deep rim optimises aero performance and improves stability in crosswinds. The alloy rim benefits from Mavic's unrivalled experience in creating light yet strong rim extrusions. The brand did this by carefully tuning the thickness of the rim wall to hit the sweet spot between stiffness, strength and weight. Bladed Straight Pull Spokes The bladed straight pull spokes are laced to Mavic's high-end Infinity hub platforms. Optimal spoke tension balance is a guarantee for perfect stiffness and great durability, with only one spokes length for both wheels to worry about. Instant Drive 360 Ratchet Freewheel System The Instant Drive 360 ratchet freewheel system is quick to engage and offers low friction. This hub easily converts from Shimano/SRAM to Campagnolo or XD cassette and is compatible with Centre Lock disc rotors. Please note: There are multiple freehub options available for this model. Please select the option that matches your setup from the menu. Additional Item Top Features: Rims Drilling: Traditional Disc brake specific profile Tyre: UST Tubeless and Tubetype Internal Width: 19mm ETRTO Size: 622x19TC UST tubeless technology SUP welding technology Spokes Material: Steel Shape: Straight pull, flat, double butted Nipples: Steel, ABS Count: 24 front and rear Lacing: Front and rear crossed 2, contactless Hubs Front and Rear Bodies: Aluminium Axle Material: Aluminium Front: Quick release and 12x100 thru-axle compatible Rear: Quick Release, 12x142 and 12x135 compatible Infinity hubs Instant Drive 360 freewheel technology QRM Auto bearing preload technology Freehub Compatibility: Multiple options available to select from the menu Intended Use ASTM CATEGORY 2: Road and offroad with jumps less than 15cm For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg, bike included Recommended Tyre Sizes: 25 to 32mm Max. Pressure: See indication on wheel and tyre. If they differ, use the lowest of the 2 Delivered With Front QR adaptors Rear QR adaptors for Instant Drive 360 UST valve and accessories Pre-installed tubeless rim tape User guide Technologies: Maxtal Aluminium Alloy: Light and strong Exclusive to Mavic, this specific aluminium alloy offers a higher strength to weight ratio than conventional 6106 alloy. UST Tubeless Technology: Traction and control Universal Standard for Tubeless. Ready to ride tubeless system. The UST concept improves traction, control and comfort whilst reducing inertia and flats. Instant Drive 360 Freewheel Technology: The Instant Drive 360 freewheel system is super light and efficient. A large contactless rubber seal provides low friction, while a wide array of end caps makes it super versatile. QRM Auto Bearing Preload Technology: Qualité de Roulements Mavic Auto is Mavic's latest innovation. Those cartridge bearings are of course double sealed with C3 internal clearance. Their preload is automatically adjusted to guarantee a perfect spin with no play on the long run. SUP Welding Technology: Stronger and smoother joint Soudé Usiné Process. After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish. Manufacturer's Part Numbers: P1563155 Black 700c Shimano P1564160 Black 700c SRAM XD XDR
Tadej Pogačar Special Edition We've all seen Tadej Pogačar's audacious attacks at the Classics and Tours. And it's the tufts of hair poking out of his Trenta 3K Carbon Road Helmet (MIPS) that have become an instant trademark, visible as he powers away from the pack. This special edition Trenta gets a sparkly iridescent finish and special-edition logos, making it an instant winner, just like Tadej. Elite Performance The Trenta 3K Carbon has been engineered to give you the finest levels of head protection as well as energy-saving aerodynamics and incredible levels of cooling. When you're attacking from the peloton, just like Tadej, this ensures you're the freshest in the bunch. MIPS AIR® Technology The MIPS (Multi-directional Impact Protection System) AIR® Technology is an advanced head protection system integrated into the helmet's padding system. This gives the lightest version of this outstanding rotational management system. The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here 3K Carbon Technology When it comes to lightweight protection, the MET R&D team have taken advantage of the properties of 3K Carbon. A carbon cage is embedded into the helmet, boosting protection levels while not adding weight. The carbon’s elastic modulus has been taken advantage of, allowing a reduction in the density of the EPS foam by 20% but maintaining the very best level of impact absorption. This gives you a super-light and highly ventilated helmet with no compromise to safety levels. Safe. Fast. And Cool. The Trenta Carbon has been engineered to be both slippery through the air and to optimise air cooling. Starting with the airflow, the front vents harness the power of the Venturi effect. This has the effect of actively drawing in air and pushing warm air out through the rear exhaust vents. This turbo-charged airflow is also achieved without inducing excess drag. To the back, the tail of the helmet also works for a specific aerodynamic purpose. Working in synergy with the NACA front vent, the tail design drives airflow for constant cooling. The tube-shaped tail and internal channelling also mean you benefit from up to 7% less drag compared to a more traditional road helmet. Less drag. Less energy wasted. More energy when going for the win. Safe-T Orbital Fit The Trenta Carbon also features MET's most adjustable fit system yet, the Safe-T Orbital. This allows two-step occipital adjustment, four-step vertical adjustment and a micrometrical dial that allows you to fine-tune the fit for all-day riding comfort.
Designed with Aerofloat - an updated three-layer neoprene construction with integrated air cells, the Sailfish One 7 Wetsuit provides increased buoyancy for more optimal and stable body positioning. Utilising Speedflex neoprene which is both durable and buoyant for long-lasting wear and to further enhance your performance in the water while Hydro Coating works to reduce drag and frictional resistance. Zero Resistance Panels across the shoulders and back with enlarged armpit zones offer excellent flexibility for full freedom of movement so you can make the most of your stroke and be more energy efficient when moving through the water. Stability panels along the side, front and back of the torso alongside anatomically formed hip panels hold everything in place for a streamlined performance. An updated comfort inner liner created with a nylon-pressing technique alongside a high-quality single-layer Flex Collar ensures an incredibly comfortable fit and low water ingress and finally, a special lining in the anatomically shaped leg design allows for a speedy transition.
Go with the Flow As we all know and can feel, wind resistance is the major factor to overcome when cycling at speed. And so it makes sense to do all you can to lessen the effect when racing against the clock. The Codatronca Helmet smooths airflow thanks to the carefully engineered wide-body design and short tail. The shoulders are an area that can cause considerable turbulence leading to increased drag. To lessen this drag MET has designed the Codatronca with a wide frontal area that guides airflow smoothly across this key area. The short tail design has also been engineered so you can move your head freely and still enjoy smooth airflow. The helmet remains efficiently aerodynamic from all angles of attack. Lastly, the large Dual Sheild lens integrates into the smooth design, minimising disruption to airflow and allowing for a clear view even when adopting more aggressive positions on your Tri-bars. And because it's magnetically attached, it's easy to remove and clip into the 'recovery' position as you're easing down after your effort. Cool and Easy to Use Of course, riding fast can generate considerable body heat but three air vents, carefully placed in areas of high-pressure airflow, creates an excellent level of cooling inside the helmet all without adversely affecting drag. In terms of fit, the Codatronca benefits from the MET Safe-T Orbital fit system, this easily adjustable system provides 360° of adjustment, three vertical and two occipital adjustments, making dialling the fit of your aero helmet remarkably easy. The Fidlock® magnetic buckle system makes fastening quick and easy too. And for triathletes, in particular, it will give you an edge when it comes to rapid transition times.
Now on its third generation, the EQUIPE RS Targa Cycling Rain Jacket has had some tweaks to its design and construction to improve its all-around performance. The 3-layer Schloss Tex material is Assos' lightest waterproof fabric. This rustle-free, stretchy material sandwiches a more durable breathable membrane giving not only a boost to wet-weather comfort but also an increase in its ability to take on the general wear and tear of regular use. Other improvements see the removal of the previous iterations pocket slots, removing an area where water can seep inside. Instead, a two-way front zipper makes it easy to unzip from the bottom and free up access to your jersey pockets as well as giving easy control of ventilation. A stitchless rear reflective strip also removes an area of water ingress while keeping you visible when daylight fades. A tall collar keeps the elements off at the neck and an extended rear lower panel fends off tyre spray at the back. Fully taped seams also ensure a watertight seal. The body-hugging Assos raceFit also ensures you're not wasting precious energy in battling a loose and flappy jacket. Superlight, easily packable and weather-proof, the EQUIPE RS Targa Cycling Rain Jacket is easily layered over your race kit to keep you protected during a wet race. And in any season it slips over any cycling kit to block wind and rain while ensuring you're not drenched in sweat when you inject more intensity.
The hubs feature high-quality contact seals and the legendary, highly adjustable Shimano cup and cone bearings that provide silky smooth rolling prowess and consistent performance. This wheel has been laced using high-end straight-pull, double-butted aero spokes for increased aerodynamics and dramatically increases stiffness and rigidity, which is very noticeable when sprinting and powering out the watts.
This stunning model features a hollow carbon crank arm construction which offers the ultimate strength to weight ratio for weaving from trail to trail. FSA has also completed this version with a UD carbon finish which adds another layer of protection and stiffness, making it ready to conquer everything a long day in the mountains has to offer.
SRAM have also paid attention to the finer details, like adding a hollow titanium anchor bolt and even refining tooth geometry of the jockey wheel. The result is that the chain runs through the new RED Rear Derailleur smoother and quieter than ever before.
The perfect companion for indoor and outdoor training, this innovative meter comes housed in a Shimano 105 R7000 crank arm and gives precision readings to within +/-1.5% in all conditions thanks to its IPX7 waterproof rating and Active Temperature Compensation Technology. Suitable for use with all Shimano Hollowtech II road drivetrains, the Stages Shimano 105 Power Meter uses ANT+ and Bluetooth connectivity to send your riding data right to your compatible device, letting you adapt your pedalling accordingly for the best possible performance. With over 200 hours of use from the included cell battery, easy installation and Tour de France-proven prowess, this is the ultimate power meter for the performance-focused rider.
While you're in the flow of your mountain bike ride, it's a thrill. But when you're risking it all for some extra speed, seeking faster lines to shave off seconds, pushing grip and skill to the limits, a crash is always a possibility. However, developed for competition and the needs of mountain bikers who just never hold back, the Legit Carbon Helmet is a premium race-day full-face that gives the confidence to keep riding fast. Uncompromised Protection When your risk-taking doesn't pay off and you experience a crash and subsequent head impact, it's the EPS foam liner of the Legit Carbon that provides impact energy absorption. By soaking up damaging impact forces it ensures greater safety for your head. Meanwhile, the carbon-fibre outer shell adds structural strength without adding weight. It also fends off those less critical knocks and bumps you'll get when mountain biking. MIPS-C2® Brain Protection System The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Feature-Packed Performance Bluegrass have not only delivered on safety but comfort is first-rate too. It begins with a total of 15 vents, ensuring airflow to the inside is optimised. Snap-in padding is soft and comfortable and it's washable too, letting you freshen up your Legit Carbon whenever it's needed. MX style claps and the double-D buckle provide a reliable and secure fit for every ride. Meanwhile, the anti-twist visor keeps off the sun, raindrops and roost and it's Goggle compatible too. It features a safety release system, lessening twisting forces on your neck when you do hit the dirt. For the gnarliest of trails when you want to increase your safety, you'll also be pleased to find the Legit is compatible with both neck braces and Inflatable emergency release systems.