These LifeLine Plastic Push In Bar End Plugs have a subtle finish with Lifeline moulded logos. A diameter of 22.2mm means they are compatible with all drop road bars. They are a very useful spare to have too, just in case yours happen to pop out on a ride.
Suitable for use with 12mm thru-axles, it ensures a firm and reliable attachment for a confidence-instilling performance.
Transfil cable end crimps, to protect the end of the inner wire.
The lightweight adaptors are perfect for converting from an IS mount to a post mount. This product only includes the adaptor, mounting bolts are not supplied.
Trail riding can be tough on your gear. The ends of your cranks take a lot of abuse as the trail rushes underneath you and your bike. Race Face brings you its lightweight yet protective Crank Boots. Simple to install, these Race Face crank arm boots slip over the ends of your chainset’s carbon crank arms, protecting them from rock strikes, tricky tree roots and anything else you encounter on the trails. Race Face products are ready for some of the most abusive riding conditions out there, made for riders who value function as well as fashion. Tested on North Vancouver's notorious "Shore", you'll be safe in the knowledge that your Race Face gear can take on whatever you throw at it.
Perfect for breathing new life back into your tyre, this inner tube is engineered for longer air retention for smooth and dependable rolling performance. Coming equipped with a 40mm Dunlop valve, it offers simple installation and inflation. Schwalbe has also put this model through a rigorous testing process to ensure consistently high performance on your ride. Reliable Inner Tube Each tube is inflated at the Schwalbe factory for 24 hours and tested for leaks, which ensures high reliability. Retains Air Longer In manufacturing, Schwalbe ensures a very high butyl content and a very high material purity. So Schwalbe tubes retain air pressure considerably longer. Manufacturer's Part Numbers: 10923311 Black/Black Dunlop 26" 1.75" 10432341 Black/Black Dunlop 26" 1.0-1.5" 10925311 Black/Black Dunlop 26" 1.5 -2.4" 10427611 Black/Black Dunlop 700c 18-28" 10927611 Black/Black Dunlop 700c 18-28 WP" 10930311 Black/Black Dunlop 27.5" 27.5-29" 29" x 1.50" DV15 Black/Black Dunlop 700c DV15 DV12A Black/Black Dunlop 700c 26" 1.00 - 1.50"
When the tubeless seal between the tyre’s air chamber and the rim’s cavity is breached, air will pass through and pressure will build up in the inner chamber, the Pressure Release Valve Stem Nut gives the air an escape route preventing damage to your rim. When installed, air escaping from the valve stem, indicates a compromised tubeless seal. Recommended not only for all Prime tubeless wheels but for all other tubeless wheels.
Each pack contains four alloy clamp bands to keep your grips firmly fitted to your bars.
Butyl tubes with the usual Continental quality. Each and every inner tube passes a stringent 100% quality control inspection. Seamless construction, with a mould-cured vulcanisation, to ensure uniform roundness and give a smooth ride and handling.
Made to ensure a snug and secure fit between your pedal and axle, this hard-wearing bearing keeps your platform firmly held as you pump your way to glory.
With a twisted polyester yarn, the Walking Laces offer high level performance and strength with the durability that withstands the rigours of the outdoors.
Complete with a Schrader 48mm valve, this Super Sealant-filled inner tube ensures that whether you're hitting the trail or just your everyday commute, your tyres will be well supported.
These pedal end caps from Nukeproof work with a wide range of Nukeproof alloy pedals. Please see compatibility information in the Top Features section. A guide for rebuilding your Nukeproof Flat pedal can be found here A guide for rebuilding your Nukeproof clipless pedal can be found here
Genuine Sixpack racing spare part.
The LifeLine HollowTech II Crank Bolt Tool is an essential tool for any service mechanic or owner of Hollowtech II cranks.
Optimised for use with Shimano internal gear hubs, this CrMo cog is compatible with e101 EPT single-speed chains and ensure a smooth shift when called into action.
This non-driveside seal fits all Nukeproof Horizon and Neutron v2 rear hubs. Hub Seal Changing this seal is easy by following the instructions below: 1. Remove non-driveside end cap 2. Take a thin flat head screwdriver and gently prize off the old seal 3. Push new seal in place 4. Refit non-driveside end cap
A robust and secure attachment between your Exposure Capture light and most action cameras. Connects the light to the side of your camera.