Thanks to the precise workmanship from DT Swiss, this rim is the perfect companion for general Trail riding, capable of sessioning all day long. As this is the asymmetric version, it will lace up perfectly with your hubs should they have an asymmetric flange design.
This rim is perfectly designed for anything you may encounter on high-intensity trail descents, it is strong and stiff so that control is predictable and stable. This rim has also been machined in areas where the extra material is not needed to reduce the weight so that it is excellent for climbing, without sacrificing structural strength. Tubeless Ready Tubeless tyres have several advantages over the conventional combination of tube and tyre. The tyre can run with lower pressures to provide a better grip without risking snakebites. The lower pressure also results in a more comfortable ride. Eliminating the tube means there is no friction between tube and tyre and therefore less rolling resistance when the tyre rolls over the ground and obstacles. If tubeless milk is used, the tyre can self-seal stings and small cuts. A big advantage for all those who like to ride for long and far away from the nearest bike shop.
Highest-Quality, Extremely Resistant Aluminium Alloy Each DT Swiss E 512 mountain bike (MTB) rim is a piece of high-end precision engineering and is constructed from the highest-quality, extremely resistant aluminium alloy. It's ready to tackle the most demanding trails, taking on the most intense trail features and rolling on past them, ready for the next challenge. Available Options: 28H means 28 spoke holes 32H means 32 spoke holes Technologies: Tubeless Technology: Tubeless tyres have several advantages over the conventional combination of tube and tyre. The tyre can run with lower pressures providing better grip without risking snakebites. The lower pressure also results in a more comfortable ride. Eliminating the tube means there is no friction between tube and tyre and therefore less rolling resistance when the tyre rolls over the ground and obstacles. If tubeless milk is used, the tyre can self-seal stings and small cuts. A big advantage for all those who like to ride for long and far away from the nearest bike shop.
Featuring a 30mm internal width with a minimal bead hook, the DT Swiss XM 481 achieves the perfect tyre profile and as it's also tubeless compatible, it's ready to tackle any mountain terrain you can place in front of it.
Enduro Optimised, Lightweight and Strong This DT Swiss E 532 Rim features a wide 30mm optimised internal width, which provides wide tyres with a perfect profile. Wide rims, when used with wider tyres will create the perfect tyre shape, making the most of the tyre's tread characteristics, grip, traction and rolling performance. This strong, lightweight and modern-profile rim is the perfect addition to any wheel build and can increase the performance of your trail-ready mountain bike (MTB). Available Options: 28H means 28 spoke holes 32H means 32 spoke holes Technologies: Tubeless Technology: Tubeless tyres have several advantages over the conventional combination of tube and tyre. The tyre can run with lower pressures providing better grip without risking snakebites. The lower pressure also results in a more comfortable ride. Eliminating the tube means there is no friction between tube and tyre and therefore less rolling resistance when the tyre rolls over the ground and obstacles. If tubeless milk is used, the tyre can self-seal stings and small cuts. A big advantage for all those who like to ride for long and far away from the nearest bike shop.
Key Features: Lightweight alloy tubeless valve, for 18-25 mm deep asymmetric road or MTB rims,Conical seal works with almost all rims, but is of course optimised for DT Swiss,Offset adaptor allows a clean install with asymmetrical rims that other valves can struggle with.,Wide bore for easy insertion of sealant and high air flow for initial inflation,Aerodynamic and easy to turn dust cap with integrated valve core extractor, please install valve with dust cap in place to ensure correct alignment.
Key Features: The DT Swiss XM 481 rim has a full 30 mm internal profile, ideal for running high-volume rubber at low pressures, Strength Boost Welding Technology creates a perfectly welded join for a durable, reliable rim, The rim bed is tubeless-ready and optimized to provide fast tire installation, a great tire fit and quick trouble-free tubeless setup, Please be aware that this rim is a lightweight XM designated rim designed for trail use, those looking for a rim suitable for more gravity focused riding are advised to check out the super strong EX 471 or EX 511, The included PHR washers and convex Squorx nipples naturally align perfectly with your chosen spokes, increasing stiffness and durability with no weight penalty over traditional eyeleted rims, Unique process for the black coating produces a tough and durable finish, Available in both 28 and 32 hole count in 27.5 and 29 inch, ERD 563 mm (27.5 inch) or 601 mm (29 inch), Outer width 35 mm Inner width 30 mm, Height 21 mm, Weight 490 g (27.5 inch) or 525 g (29 inch).
This mountain bike (MTB) rim comes equipped with a rock-solid aluminium build, which allows it to handle all the knocks and hits associated with day-long adventures and epic mountain rides. E Thirteen has also put this model through its CNC-machining process, which shaves off any unnecessary excess material while still maintaining maximum strength. This results in a superior strength to weight ratio, so you'll benefit from its fantastic stiffness and durability, without any weight penalty. Coming equipped with 28 spoke holes, this is a great choice for completing your next wheel build or for upgrading your existing stock rim. Sold individually. Manufacturer's Part Numbers: CH-0348-980 Black/Grey 28H 29" CH-0348-680 Black/Grey 28H 26"
Carbon-built for an extremely durable and lightweight performance, this 43.5mm wide rim has no issue with running you up, over and back down every hill with pace, poise and purpose. Optimised for use with tyres as wide as 2.8", the M635 makes the most of every run, with its large surface contact area and vertical compliance guaranteeing a stable and steady run, no matter the terrain. Offering unrivalled traction and rolling prowess, this tubeless ready titan is the perfect pick for every All Mountain endeavour. Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.
ENVE M730 Carbon MTB Rims with Pro 4 HubsFor durability without compromising speed, ENVE's M730 MTB rims are the perfect solution for anyone looking to the future of Enduro and All Mountain riding. With a rim 27mm and 38mm wide, expect to utilise excellent aerodynamics and traction even on climbs with an effective ride smoothness to boot. Additionally, with ENVE's Protective Rim Strip technology, feel comfortable optimising your tyre pressure without risking damage to the rim, freeing you to perform even at super-low pressures.Complete with Durable Pro 4 HubsBuilt for durability, these alloy hubs use a 44-tooth drive mechanic to allow for excellent power transfer while also remaining lightweight, so you can press your advantage even further on the track knowing you'll get just energy back as you put in.Features: Material: 100% Unidirectional Carbon Fibre Use: Enduro, All Mountain Recommended Suspension Travel: 130 - 180mm Rim Depth: 27mm Rim Width Internal: 30mm Rim Width External: 38mm Spoke Hole Count: 32 Recommended Tyre Width: 2.3 - 2.5" Weight: 552g (each)Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE M735 Carbon MTB Rims with Pro 4 HubsIncredible strong and built to last, ENVE's M735 rims are a wider iteration of the M730 model that offers even greater traction and stability on the track. With a deep 27mm profile and a 100% UD carbon material, these rims offer brilliant aerodynamics for speed build-up while remaining lightweight to allow you to ascend and descend with maximum control. Plus, with ENVE's Protective Rim Strip technology, dare to choose a wider range of tire pressures without risking damage to the rim.Optimised with Pro 4 HubsThese rims come complete with a set of Pro 4 Hubs, each designed for durability while also offering excellent power transfer so that you get the most out of each pedal.Features: Material: 100% Unidirectional Carbon Fibre Use: Enduro, All Mountain Recommended Suspension Travel: 130 - 180mm Rim Depth: 27mm Rim Width Internal: 35mm Rim Width External: 41mm Spoke Hole Count: 32 Recommended Tyre Width: 2.5 - 2.8" Weight: 558g (each)Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Over the last year we have been focused on improving the performance and longevity of braking on our road rims. As a result we introduce the ENVE grey pad that better manages heat, minimizes abrasion, and performs in wet conditions. The ENVE grey pad will be supplied with all new wheel sets and available for purchase aftermarket as a composite specific brake pad.ENVE brake pads are sold in pairs 2 brake blocks for the use on one wheel you require 2 sets for a complete bike.