ENVE M730 Carbon MTB Rims with Pro 4 HubsFor durability without compromising speed, ENVE's M730 MTB rims are the perfect solution for anyone looking to the future of Enduro and All Mountain riding. With a rim 27mm and 38mm wide, expect to utilise excellent aerodynamics and traction even on climbs with an effective ride smoothness to boot. Additionally, with ENVE's Protective Rim Strip technology, feel comfortable optimising your tyre pressure without risking damage to the rim, freeing you to perform even at super-low pressures.Complete with Durable Pro 4 HubsBuilt for durability, these alloy hubs use a 44-tooth drive mechanic to allow for excellent power transfer while also remaining lightweight, so you can press your advantage even further on the track knowing you'll get just energy back as you put in.Features: Material: 100% Unidirectional Carbon Fibre Use: Enduro, All Mountain Recommended Suspension Travel: 130 - 180mm Rim Depth: 27mm Rim Width Internal: 30mm Rim Width External: 38mm Spoke Hole Count: 32 Recommended Tyre Width: 2.3 - 2.5" Weight: 552g (each)Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE M735 Carbon MTB Rims with Pro 4 HubsIncredible strong and built to last, ENVE's M735 rims are a wider iteration of the M730 model that offers even greater traction and stability on the track. With a deep 27mm profile and a 100% UD carbon material, these rims offer brilliant aerodynamics for speed build-up while remaining lightweight to allow you to ascend and descend with maximum control. Plus, with ENVE's Protective Rim Strip technology, dare to choose a wider range of tire pressures without risking damage to the rim.Optimised with Pro 4 HubsThese rims come complete with a set of Pro 4 Hubs, each designed for durability while also offering excellent power transfer so that you get the most out of each pedal.Features: Material: 100% Unidirectional Carbon Fibre Use: Enduro, All Mountain Recommended Suspension Travel: 130 - 180mm Rim Depth: 27mm Rim Width Internal: 35mm Rim Width External: 41mm Spoke Hole Count: 32 Recommended Tyre Width: 2.5 - 2.8" Weight: 558g (each)Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Carbon-built for an extremely durable and lightweight performance, this 43.5mm wide rim has no issue with running you up, over and back down every hill with pace, poise and purpose. Optimised for use with tyres as wide as 2.8", the M635 makes the most of every run, with its large surface contact area and vertical compliance guaranteeing a stable and steady run, no matter the terrain. Offering unrivalled traction and rolling prowess, this tubeless ready titan is the perfect pick for every All Mountain endeavour. Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.
Image is for illustration purposes only.You need a road disc wheelset? Tubeless Ready and super light? CXD4 is your first choice!RIM:Designed disc only -for the latest road and cross bikes,Tubeless ready design,Sleeve joint,Offset profile – makes a stronger wheel.SPOKES:Stainless steel BLK spokes,24h front wheel – 2 cross lacing,24h rear wheel – 2 cross lacing.HUB:Lightweight AL7075 body,Lightweight aluminum axle,Low resistance sealed bearings – 2 in the front hub and 4 in the rear,Compatible with 8, 9, 10 & 11 spd,Centerlock,Front wheel thru axle 12mm 100,Rear wheel thru axle 12mm 142.WEIGHT:700C: 1536g.
The Boondocks 5 are fast rolling and are tubeless ready. A great option for gravel bikes!RIMDesigned disc only for the latest gravel and cross bikes,Tubeless ready design.SPOKESStainless steel double butted black spokes,24h front wheel – 2 cross lacing,24h rear wheel – 2 cross lacing.HUBLow resistance sealed bearings,6-bolt,Lightweight aluminum axle,Compatible with 8, 9, 10 and 11 spd,Thru Axle F & R 12mm.WEIGHT700C: 1910g,Wheelset weight limit: 100kg.
This high-quality MTB rim features an asymmetrical carbon rim design, which makes it lighter overall, more impact resistant and laterally stiffer while remaining vertically compliant. This makes it a great choice of upgrade for trail, cross-country and enduro riders who want a strong and dependable rim that won't add any unnecessary grams to their ride. With reinforced spoke beds, proven 4D angled spoke hole drilling and a 30mm inner rim width, this model is incredibly durable as you tackle whatever the off-road terrain has to offer. Lightweight Carbon MTB Rim WTB's flagship CZR carbon rim delivers minimal rotational weight and fine-tuned compliance to make you feel at one with the terrain. Reinforced spoke holes, TCS 2.0 technology, an asymmetrical design and two years of development make it one of the most dependable carbon rims on the market. CZR rims set themselves apart from the pack by providing unbeatable strength and ride quality at a more affordable price. Sold individually. Technologies: TCS 2.0 Technology: Built upon WTB's proven Tubeless Compatible System, TCS 2.0 introduces a more robust, easily installed, and dependable tubeless system. A recessed channel along the centre of TCS 2.0 rims allows for the installation of the Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tyre and rim. Once the Solid Strip is installed, TCS Tape is then applied to provide the airtight seal needed for a reliable tubeless system. Manufacturer's Part Numbers: W020-0607 Black 28H 29" W020-0608 Black 32H 29"
This gravel-ready rim features an asymmetrical carbon build that allows it to deliver minimal rotational weight and fine-tuned compliance to make you feel at one with the terrain. WTB has also put this model through a series of lab tests and found that its CZR rim is lighter overall, more impact resistant, and laterally stiffer while remaining vertically compliant. After two years of development, this durable rim offers excellent reliability, wherever your next gravel bike adventure leads you. Gravel Bike Rim with Tubeless TCS 2.0 Technology WTB has equipped this gravel bike rim with its renowned TCS 2.0 technology, which provides a more robust, easily installed, and dependable tubeless system. A recessed channel along its centre allows for the installation of the updated Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tyre and rim. Installation of the stout Solid Strip allows for more pliable, and easy to install, TCS Tape to provide the airtight seal needed for a tubeless system. This means that riders will enjoy tubeless benefits such as the ability to run lower air pressure for greater stability on rough terrain, increased comfort and less chances of punctures or flats. Additional Item Top Features: Spoke Beds: Reinforced with proven 4D angled spoke hole drilling Max Spoke Tension Range: 110-120KgF Single or Pair: Single Tubeless Tape Width: 28mm Technologies: Reinforced spoke beds, proven 4D angled spoke hole drilling and an asymmetrical design…all the necessary ingredients of an incredibly durable rim. 23mm internal rim width for the gravel-centric. When compared to the competition, WTB lab tests proved its CZR carbon rims to be lighter overall, more impact resistant, and laterally stiffer while remaining vertically compliant. To be precise, its CZR i23 rims were 38% more impact resistant than their direct competition. TCS 2.0 Technology: TCS 2.0 introduces a more robust, easily installed, and dependable tubeless system. A recessed channel along the centre of TCS 2.0 rims allows installation of the updated Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tyre and rim. Installation of the stout Solid Strip allows for more pliable, and easy to install, TCS Tape to provide the airtight seal needed for a tubeless system. Manufacturer's Part Number: W020-0605
With an aerodynamically-sound 85mm depth, the aero profile on this top-end rim allows you to cut through the air with precision and speed, streamlining every run to perfection. Constructed from a lightweight and durable carbon fibre, it is well equipped to cope with the powerful rolling incurred by such speedy riding. Tubeless ready for added traction and reduced rolling resistance when you need it most and disc brake optimised for a more controlled stopping experience when putting on the reins, this modern road rim has personal bests and podiums running through it.
Measuring an aerodynamically-sound 85mm depth, the aero profile on this high-level hoop allows you to cut through the air more potently and powerfully as you make those vital gains. Made from a lightweight and long-lasting carbon, it is more than capable of withstanding the pressures of rapid riding, making sure every second is accounted for on your path to the podium. Tubeless ready for added traction and reduced rolling resistance when you need it most, speed is definitely of the essence with the BlackEdition 85 Carbon Road Rim.
Bell Super DH MIPS HelmetDesigned for the beaten path, the Super DH Mips Helmet is a downhill specialist loaded with technology. Whether your chosen path takes you to kickers or halfpipes, this World Cup-ready lid is the perfect companion for those that love to shred.High-End PerformanceOffering full-face coverage certain to inspire confidence in your ride, the Super DH MIPS Helmet has a 360-degree wraparound and a tool-free removable chin bar that has breezed through ASTM 1952 testing. Dominating mountain climbs, technical sections and bike parks, this impressive Bell creation welcomes uncompromised performance thanks to the maximised ventilation. Working hand-in-hand, the Super DH deploys an overbrow ventilation system and an X-static padding to improve breathability and enrich comfort for long days spent in the saddle. Keeping you cool when you shred hard, maintaining focus allows you to nail that all-important booter.AdaptableFor those that want more from their helmet, the Bell Super DH Mips certainly goes that extra mile to help you feel dialled. There is a goggle-friendly eye-port to stash your glasses and the adjustable height visor provides customised protection as you pedal. Should you wish to post your daring tricks on social media, you can film your entire session thanks to the snap-in camera mount.With sweat guide padding, a float fit DH and fusion in-mould polycarbonate shell also gracing your ride, there is no doubt the Super DH Mips Helmet is one of the finest offroad lids of its generation.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Features:Float Fit DH™ w/ Fidlock BuckleFusion In-Mold Polycarbonate ShellGoggleguide™ Adjustable Visor SystemIntegrated Breakaway Camera MountMIPS Spherical & No-Twist Tri-Glides™Overbrow Ventilation™Progressive Layering™Sweat Guide™ PaddingWraparound Protection™X-Static® and XT-2® PaddingShop all MIPS helmets - Click hereBuy Bell from Chain Reaction Cycles, the World's Largest Online Bike Store.
Bell Super DH MIPS HelmetDesigned for the beaten path, the Super DH Mips Helmet is a downhill specialist loaded with technology. Whether your chosen path takes you to kickers or halfpipes, this World Cup-ready lid is the perfect companion for those that love to shred.High-End PerformanceOffering full-face coverage certain to inspire confidence in your ride, the Super DH MIPS Helmet has a 360-degree wraparound and a tool-free removable chin bar that has breezed through ASTM 1952 testing. Dominating mountain climbs, technical sections and bike parks, this impressive Bell creation welcomes uncompromised performance thanks to the maximised ventilation. Working hand-in-hand, the Super DH deploys an overbrow ventilation system and an X-static padding to improve breathability and enrich comfort for long days spent in the saddle. Keeping you cool when you shred hard, maintaining focus allows you to nail that all-important booter.AdaptableFor those that want more from their helmet, the Bell Super DH Mips certainly goes that extra mile to help you feel dialled. There is a goggle-friendly eye-port to stash your glasses and the adjustable height visor provides customised protection as you pedal. Should you wish to post your daring tricks on social media, you can film your entire session thanks to the snap-in camera mount.With sweat guide padding, a float fit DH and fusion in-mould polycarbonate shell also gracing your ride, there is no doubt the Super DH Mips Helmet is one of the finest offroad lids of its generation.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Features:Float Fit DH™ w/ Fidlock BuckleFusion In-Mold Polycarbonate ShellGoggleguide™ Adjustable Visor SystemIntegrated Breakaway Camera MountMIPS Spherical & No-Twist Tri-Glides™Overbrow Ventilation™Progressive Layering™Sweat Guide™ PaddingWraparound Protection™X-Static® and XT-2® PaddingShop all MIPS helmets - Click hereBuy Bell from Chain Reaction Cycles, the World's Largest Online Bike Store.
Bell Super DH MIPS HelmetDesigned for the beaten path, the Super DH Mips Helmet is a downhill specialist loaded with technology. Whether your chosen path takes you to kickers or halfpipes, this World Cup-ready lid is the perfect companion for those that love to shred.High-End PerformanceOffering full-face coverage certain to inspire confidence in your ride, the Super DH MIPS Helmet has a 360-degree wraparound and a tool-free removable chin bar that has breezed through ASTM 1952 testing. Dominating mountain climbs, technical sections and bike parks, this impressive Bell creation welcomes uncompromised performance thanks to the maximised ventilation. Working hand-in-hand, the Super DH deploys an overbrow ventilation system and an X-static padding to improve breathability and enrich comfort for long days spent in the saddle. Keeping you cool when you shred hard, maintaining focus allows you to nail that all-important booter.AdaptableFor those that want more from their helmet, the Bell Super DH Mips certainly goes that extra mile to help you feel dialled. There is a goggle-friendly eye-port to stash your glasses and the adjustable height visor provides customised protection as you pedal. Should you wish to post your daring tricks on social media, you can film your entire session thanks to the snap-in camera mount.With sweat guide padding, a float fit DH and fusion in-mould polycarbonate shell also gracing your ride, there is no doubt the Super DH Mips Helmet is one of the finest offroad lids of its generation.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Features:Float Fit DH™ w/ Fidlock BuckleFusion In-Mold Polycarbonate ShellGoggleguide™ Adjustable Visor SystemIntegrated Breakaway Camera MountMIPS Spherical & No-Twist Tri-Glides™Overbrow Ventilation™Progressive Layering™Sweat Guide™ PaddingWraparound Protection™X-Static® and XT-2® PaddingShop all MIPS helmets - Click hereBuy Bell from Chain Reaction Cycles, the World's Largest Online Bike Store.