Shorter valve inner tubes are ideal for wheels with rim depths of 24mm or 30mm but are not ideal for wheels with rim depths of 40mm or above (as the shorter valve would not extend out of the rim valve hole). Presta valve tubes are most commonly used for road wheels (700c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commanly found on MTB wheels as valve is larger and won't fit through 700c rim valve holes. Weights: 700 x 20-25 Race 28 Presta: 100g 700 x 32-47 Tour 28 Presta: 160g 700 x 32-47 Tour 28 Schrader: 160g
Each and every tube passes a stringent 100% quality control inspection.
Butyl tubes with the usual Continental quality. Each and every inner tube passes a stringent 100% quality control inspection. Seamless construction, with mould-cured vulcanisation to ensure uniform roundness and give a smooth ride and handling.
All tubes are seamless and mold-cured (vulcanized) to ensure uniform roundness and improved reliability at the valve stem. Each and every tube passes a stringent 100% quality control inspection.
High quality butyl tube ideally suited for Racing. The Supersonic version offers the lowest rotating weight within the MTB 26" range, therefore helping to increase your speed and efficiency.
High quality 26" MTB butyl tube ideally suited for the demands of downhill trails.
The long valve inner tube enables you to use these with deep section rims (40mm, 50mm and above) as the shorter valve would not extend out of the rim valve hole. Shorter valve inner tubes are ideal for wheels with rim depths of 24mm or 30mm. Presta valve tubes are most commonly used for road wheels (650c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commonly found on MTB wheels as valve is larger and won't fit through 650c rim valve holes. 650c Wheel Sizing Be aware that when purchasing a 650c inner tube, tyre, or wheel from the Wiggle site that what you are buying is smaller than a more conventional road 700c inner tube, tyre, or wheel. Most road bikes nowadays come fitted, as standard, with 700c wheels (including inner tubes and tyres) and not 650c. A 650c inner tube or tyre WILL NOT fit a 700c wheel. Please read the 650c Wheel Sizing guide explaining the difference between 650c and 700c wheels. Based on ETRTO (European Tyre and Rim Technical Organisation) dimensions, 650c wheels are smaller than 700c wheels by about eight percent. Please, when on this page make sure you are buying the correct tyre size for you wheel. Check the sizing on your tyre before purchasing from this page. Tyre sizes tend to be printed on the sidewalls so please check before making a purchase.
Continental High Quality Butyl MTB Tube.
High quality, lightweight butyl tube with removeable valve core perfect for race use.All tubes are seamless and mold-cured (vulcanized) to ensure uniform roundness and improved reliability at the valve stem. Each and every tube passes a stringent 100% quality control inspection.Key Features:Butyl rubber Race inner tube.,Seamless construction, with a mould-cured vulcanisation, to ensure uniform roundness,By fitting different types of tubes you can actively influence the handling characteristics of your bike with little effort. Different wall thicknesses and the associated characteristics make this possible. All tube types listed are made of a high quality butyl mixture..
An essential accessory for every cyclist and runner. The dhb Original Buff seals the neck area, trapping warmth and preventing chilly draughts getting into the upper chest and affecting your core temperature. Its multi-purpose design means it can be worn as a neck-warmer, pulled up to cover the ears, used as a head-band or stretched over the head as a hat on the coldest days.
The top of the chest is particularly susceptible to cold draughts when you're taking to the outdoors in winter. The Windslam Neck Tube from dhb provides the ideal extra seal to prevent wind entering your jacket and jersey, keeping warmth in and cold out. Like a Buff®, you can even use it as a face mask due to the mesh panel allowing for easy breathing. A versatile and outdoor essential you'll find incredibly useful, no matter what activity you have planned.
The dhb Merino Neck Tube is constructed from the highest-quality Australian wool spun into fine yarns for a soft, luxurious and itch-free feel. Merino is ideal for comfort during cold weather workouts and extended aerobic activities such as running and cycling. The inner core of the fibre is hydrophilic while the outer surface is hydrophobic, allowing it to absorb a greater amount of moisture before it feels wet compared to synthetic fibres. This neck tube is naturally breathable; moisture quickly evaporates when the fibres can't hold any more, helping you maintain your temperature and avoid overheating on sprints, climbs and hard efforts. 100% Merino Merino is the finest of wool. Soft, hypoallergenic, naturally antibacterial and therefore odour-resistant, it is 100% natural, renewable and biodegradable. Due to its fine diameter, Merino offers excellent wicking and breathability, while its porous nature provides incredible temperature and moisture management. dhb yarns can be traced back to non-mulesed sheep on farms in Australia, New Zealand and South Africa.