Super lightweight butyl tube, even lighter than latex but not porous, so no need to reinflate every day. Can also be fixed with a normal puncture kit. Shorter valve inner tubes are ideal for wheels with rim depths of 24mm or 30mm but are not ideal for wheels with rim depths of 40mm or above (as the shorter valve would not extend out of the rim valve hole). Presta valve tubes are most commonly used for road wheels (650c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commanly found on MTB wheels as valve is larger and won't fit through 650c rim valve holes. 650c Wheel Sizing Be aware that when purchasing a 650c inner tube, tyre, or wheel from the Wiggle site that what you are buying is smaller than a more conventional road 700c inner tube, tyre, or wheel. Most road bikes nowadays come fitted, as standard, with 700c wheels (including inner tubes and tyres) and not 650c. A 650c inner tube or tyre WILL NOT fit a 700c wheel. Please read the 650c Wheel Sizing guide explaining the difference between 650c and 700c wheels. Based on ETRTO (European Tyre and Rim Technical Organisation) dimensions, 650c wheels are smaller than 700c wheels by about eight percent. Please, when on this page make sure you are buying the correct tyre size for you wheel. Check the sizing on your tyre before purchasing from this page. Tyre sizes tend to be printed on the sidewalls so please check before making a purchase.
The long valve inner tubes enables you to use deep section rims (40mm, 50mm and above) as the shorter valve would not extend out of the rim valve hole. Shorter valve inner tubes are ideal for wheels with rim depths of 24mm or 30mm. Presta valve tubes are most commonly used for road wheels (650c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commanly found on MTB wheels as valve is larger and won't fit through 650c rim valve holes. 650c Wheel Sizing Be aware that when purchasing a 650c inner tube, tyre, or wheel from the Wiggle site that what you are buying is smaller than a more conventional road 700c inner tube, tyre, or wheel. Most road bikes nowadays come fitted, as standard, with 700c wheels (including inner tubes and tyres) and not 650c. A 650c inner tube or tyre WILL NOT fit a 700c wheel. Please read the 650c Wheel Sizing guide explaining the difference between 650c and 700c wheels. Based on ETRTO (European Tyre and Rim Technical Organisation) dimensions, 650c wheels are smaller than 700c wheels by about eight percent. Please, when on this page make sure you are buying the correct tyre size for you wheel. Check the sizing on your tyre before purchasing from this page. Tyre sizes tend to be printed on the sidewalls so please check before making a purchase.
This tube is an excellent performer and is superb value for money.
Stans No Tubes Tyre SealantWith just two ounces of Stan's Tyre Sealant in your standard tubeless tyre set-up, any hole up to 1/4" in size can be repaired. The sealant stays liquid for up to seven months in a mountain bike tyre. Plus, its special anti-freeze agents are used to let it function in environments as cold as -30° F.Features: Riding in arid climates or storing the bike in a hot area will require more frequent monitoring Pre-measured and ready to apply to one bicycle tyre Lasts for 2 to 7 months whilst in a mountain bike tyre Can be used in environments as cold as -30° FUse: Commuter/Touring/Cyclocross/Road/Mountain Bike Buy Stan's No Tubes Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Just two ounces of Stans Tire Sealant in a converted standard tire or a tubeless tire can repair up to a 1/4 inch hole instantlyPre-measured and ready to apply to one bicycle tireStans Tire Sealant will stay liquid in a mountain bike tire with a thin casing for two to seven months on average. Riding in arid climates or storing the bike in a hot area will require more frequent monitoring of sealant levels. Special anti-freeze agents allow the sealant to be used in environments as cold as -30° F.
Unlike other tyre sealants, Stan's No Tubes Tyre Sealant is a very thin, low viscosity liquid that coats the inside of the tyre and carries with it specially formulated sealing crystals. The low viscous nature allows the sealant to quickly reach the puncture site and the crystals aid in sealing large holes, something that thicker or foaming style sealants cannot claim. Stan's Tyre Sealant will stay liquid in a mountain bike tyre with a thin casing for 2-7 months on average. Riding in arid climates or storing the bike in a hot area will require more frequent monitoring of sealant levels. Special anti-freeze agents allow the sealant to be used in environments as cold as 28° C (-20° F). Stan's No Tubes Tyre Sealant is an award winning solution from the folks that invented tubeless conversion and redefined puncture protection. Please read the MBUK's Six of the best guide to tyre sealants.
Each and every inner tube passes a stringent 100% quality control inspection
Pirelli SporTUBE Gravel Inner TubesThe SporTUBE Gravel Inner Tube is the ideal inner tube for reliable off-road gravel riding, long-distance touring and general road cycling. The Pirelli SporTUBE Gravel inner tube is durable, lightweight and reliable, and it features a reliable 48mm Presta valve.The SporTUBE is the most classic cycling inner butyl tube range, the standard interpretation of the most used air retention system in the world A complete range with the size and specification for every kind of cyclist and discipline, from road cycling to urban commuting. Features: Material: Butyl Valve Type: Presta Valve Length: 48mm Use: Road, gravel touringBuy Pirelli Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The long valve inner tube enables you to use these with deep section rims (40mm, 50mm and above) as the shorter valve would not extend out of the rim valve hole. Shorter valve inner tubes are ideal for wheels with rim depths of 24mm or 30mm. Road Inner Tubes with Presta Valves Presta valve tubes are most commonly used for road wheels (700c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commonly found on MTB wheels as the valve is larger and won't fit through 700c rim valve holes. Inner Tube Weights: 700 x 20-25 (60mm valve): 105g 700 x 20-25 (80mm valve): 105g 700 x 25-32: 125g 700 x 32-47 Tour28: 200g 700 x 32-47 Cross28: 155g
Lightweight butyl inner tube.
0.9mm wall thickness for optimum puncture protection and also the butyl tubes provide better resistance to friction caused by spokes and old rim tape.
This inner tube features a Presta valve and it is suitable for 29" tyres for quick and easy installation. Sizes Available: 29" x 2.2"- 2.5" Presta 48mm 55/64-622 Weight: (+/- 10%) 29" x 2.2"- 2.5" Presta 48mm: 336±17g