It may not look much but if cleaned after every use, it will clean up chains time and time again. Step 1. Step 2. Step 3. Directions for use: 1) Apply Fenwick’s Foaming Chain Cleaner and allow to soak in 2) Insert chain into ‘V’ slot of sponge on the lower section of the chain 3) Holding sponge firmly in position, run the chain backwards through the sponge for 30 seconds 4) Rinse the chain thoroughly with clean water 5) Re-lube with any Fenwick’s chain lube 6) To clean the sponge, just apply some Fenwick's Foaming Chain CLeaner to the ‘V’ slot straight after use, rub it in and rinse thoroughly.
These bike brushes have “Sure Grip” dual density handles to ensure a positive grip even with wet hands. Each item in this Park Tool Brush Set is specially designed for a specific cleaning purpose: The "Y" brush is for large frame tubes and tyres. It will wrap around these to clean. The wire can also be bent to different shapes for different size tyre and tube shapes. The frame cleaning sponge brush is a combination scrubbing sponge/bristle bush. Very useful between spokes on the rim. Also good for rotors and under the headset, and under the fork. The tapered detail brush also called a "bottle brush" is useful for cleaning hub centres and narrow areas, such as under front derailleurs, behind brakes, etc. The GSC-1 gear brush is for rear derailleur pulleys, rear cogs and any general degreasing. Its comb section is for cleaning between cogs where the bristles cannot reach.
Environmentally friendly, easy to rinse off and highly effective, this degreaser will help you components to look and perform like new again.
This Cleaner is also multi-purpose, as it can even be used as a carbon paste to prevent seatposts slipping in carbon frames.
From the minute you start using FS-10, you’ll know that something is very different. Not only do the natural ingredients smell nice, but they also enhance the performance of FS-10.
Spray the whole bike to bring a sparkle back to the paintwork and any polished metal parts. Then rinse with clean water.
Many cleaning products contain silicon, polish or other additives which have a detrimental effect on disc brakes. Problems caused range from squealing to total loss of power. Hope realised that the only way to stop these problems would be to produce their own range of cleaners. Shifter contains no Sodium Hydroxide (caustic soda) which attacks aluminium and anodised surfaces. Shifter contains a substitute component that acts as a very effective releasing agent cutting through dirt without attacking material surfaces.
The RBS-5 brush set includes the large side scrubbing brush, two roller brushes, and two wicking foam blocks.
Designed to get the maximum usage out of your chain, this fluid will remove all sorts of dirt and grease build-up from whatever terrain you have been riding. Ideal for use with the CM-5.2 Cyclone Chain Scrubber, and CM-25 Professional Chain Scrubber, or just as a general purpose degreaser, this formula is 100% biodegradable and plant-based, making it a smart and environmentally-friendly choice for getting your chain gleaming again. Safe to use on alloys, plastics and rubber parts and containing a rust inhibitor for added longevity, this Park Tool CB4 fluid will give your chain the best possible clean ahead of lubrication. Note: Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush.
Morgan Blue has the most complete range of maintenance products, including a complete massage line, which many of the continental Pro Teams use.
Apply the Chain Cleaner on the chain, the front and rear derailleurs. Let the cleaner soak in for about 5 minutes then rinse off with soapy water. Rub with a dry cloth then re-lubricate the chain and drivetrain parts. Warning: Do not use on bearings and do not use Chain Cleaner on the frame & fork in extreme sun. Morgan Blue has the most complete range of maintenance products, including a complete massage line, which many of the continental Pro Teams use.
This superb pack contains three bike care products for protecting and maintaining your bike. Wet Lube - 4oz Wet Lube is typically recommended for extreme conditions. Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives. Wet Lube is Finish Line's strongest, longest lasting and most water resistant lubricant. Wet Lube goes on wet, and stays wet, to provide maximum drivetrain smoothness, extremely quiet rides, and ultimate rust protection in the harshest of environments. If you use Wet Lube for riding off-road or in dry climates, be sure to wipe the excess from parts to minimize the attraction of dirt and grime. Since 1994, when Wet Lube was first introduced, it has become the preferred lubricant for many professional on and off-road teams around the world. Use Wet Lube when you ride hard and long. Proven performance for 100-plus mile rides, muddy off-road conditions, long rainy commutes, and foggy salt-air coastal climates. A heavier, wet-style lubricant that requires a little more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection. Super Bike Wash - 4oz Use Super Bike Wash™ to quickly clean dirt, clay, road grime, chain soils, nutritional residues and winter storage grime off all surfaces of your bike with little to no scrubbing. Super Bike Wash™ uses state of the art, eco-friendly cleaning agents that work together to create a high-speed cleaning system. Super Bike Wash™ is non-toxic and meets the highest readily biodegradable standards. It can be safely used indoors or outdoors. Super Bike Wash™ can be used two ways: spray on and wipe off, or spray on and hose off. It is strong enough to remove surface grime off the drivetrain and safe enough to remove all the grime that builds up on the frame, saddle, brakes, and handlebar tape. Safe for carbon fibre, titanium, aluminium, steel, and clear coat. Recommendation: Use Super Bike Wash™ every second or third ride to keep your bicycle looking like new and to remove the contaminants that slowly but surely starts to degrade look and performance of a bicycle. Multi-bike Degreaser - 4oz Strong and safe! A new technology degreaser that quickly cleans without damage to rubber or plastic components. Strong enough for the grimiest metal parts, yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, painted surfaces, etc... Multi-bike Degreaser features 100% active (no water) biodegradable degreasing solvents, so bicycle chains and gears are cleaned more quickly, and often without a need for a water rinse. Less time cleaning means more time riding! Powerful soy-extracted solvents break down grease, grime, and stubborn soils with amazing ease and will biodegrade rapidly when they get in the environment.