This no-nonsense gloss finish frame polish is designed to polish and protect your frame thanks to its high-quality biodegradable formula. Ideal for restoring your bike to a showroom shine, this frame polish removes post wash watermark and stains, while also protecting against dirt, tar and mud. Frame Juice is your ticket to a box-fresh bicycle after even the most miserable of mud baths. It’s the final step in your bike wash and guarantees that your bike will return to the garage gleaming with no streaks and stains, blotches or blemishes. Use Frame Juice as a spray-and-polish part of your bike wash or lash it on pre-ride to protect your bike from a mud-repelling force field.
The Allpine Light Eco cleaner is a deep-cleaning, highly efficient and biodegradable bike cleaner that is formulated using pine oil - this superb bike cleaner is ideal for quick cleaning without the need to rinse using water afterwards. With its intense pine scent, Allpine Light is a biodegradable cleaner that will leave your bike clean and shiny. Its formula is very effective against dirt and does not require rinsing, making it ideal also for electric bikes (E-Bikes). Biodegradable Pine Oil Eco Bike Cleaner Allpine Light is harmless to the environment but very effective against dirt. After using it, you can get on a clean bicycle with a nice pine scent - a good way to start an epic ride. It is also ideal for E-Bikes since there is no need to rinse it away after cleaning. There are times when you are in a hurry and a quick cleaning is sufficient, or – especially for e-bikes - you want to limit the use of water close to electrical contacts. For these situations of moderate dirt, Allpine Light and a rag are enough to clean the bike, without the need to rinse with water. Use Without Rinsing: - Spray Allpine Light on a clean rag and wipe the entire frame - After cleaning, the surface will be shiny, with an anti-water and antistatic effect - As it does not contain silicone, it avoids that annoying sticky effect which is a real dust magnet. The surface thus treated also facilitates the flow of water - Note: Allpine Light does not remove the lubricant from the chain, so it is not necessary to relubricate it after such a cleaning - When the going gets tough, it doesn't hold back - If the bike is very dirty and / or muddy, you have to perform a serious cleaning Use With Rinsing: - Generously spray Allpine Light all over the bike - Wait a few minutes to let the product act - Rinse with plenty of water. A sponge or brush is recommended for an optimal result - Dry with a clean cloth. If needed, use more Allpine Light - without rinsing - to remove any streaks or traces of dirt - Lubricate the bicycle (chain, suspension, moving parts) after such a thorough cleaning
This bike-specific brush helps you to get right into the most awkward areas of your bike. Its solvent resistant nylon bristles will remove even the most stubborn dirt.
These bike specific brushes will help you get into all those awkward areas of your frame and drivetrain, helping you bring them up like new again!
Saves wear and tear on your chain and freewheel. Works great on brakes or other places where dirt collects.
This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains. If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle. Chain Cleaning with Minimum Waste There is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvents are wasted without getting to deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike. Please Note: Reducing the amount of solvent used doesn’t mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside. Deep Cleaning Formula The chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively removes dirt on each side, pushing the solvent inside the chain. Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it’s perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended to keep the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of it in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. In the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa has selected Mangiacatena materials and construction for long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistance For Single-Speed Transmissions and 5 to 13 Speed Chains The chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.
The Gel Bike Cleaner and Drivetrain Cleaner work in unison to remove all traces of dirt and grime, leaving your bike looking as good and performing as great as when new and is then ready for a new application of lubricant. The All-Weather Lube provides long-lasting protection, it seeps deep into chain links and ensures your drivetrain shifts with the utmost efficiency no matter how demanding the conditions. In the Box: Tru-Tension Gel Bike Cleaner Tru-Tension Drivetrain Cleaner Tru-Tension All Weather Lube
This bike cleaner features a foaming formula, which clings to the surface of the bike and quickly lifts dirt away from the surface, is 100% biodegradable and contains no harmful chemicals, acids or salts.
This brake cleaner features a high-powered nozzle, which instantly blasts dirt and grime away from hard to reach places within your brake setup, for superior braking performance. Plus, unlike most brake cleaners that have a strong chemical smell, this cleaner from Tru-Tension has a cleaner and fresh banana fragrance.
Rubber and plastic safe
The Absorb-It Mat comes in two different sizes: 48" X 18" and 60" X 36. Additionally, its special absorption fibre technology absorbs and traps chain lubricants, cleaners, degreasers, brake fluid and hydraulic oils. Finally, its combination of absorption fibres and a leak-proof poly liner make it the perfect accessory when degreasing and lubricating bike chains. Small: The 48" x 18" mat will absorb and trap up to 1 litre of fluids. Large: The larger 60" x 36" mat will absorb and trap up to 2.5 litres of fluid. Both mats can be cut with a scissor to fit in custom areas.
This citrus-alcohol based degreaser works hard to get rid of grime and greasy build-ups on your chain, derailleurs and other gearing parts. Reusable up to three times, this efficient and environmentally-friendly bottle is an excellent addition to your cleaning system.