The Campag Crank & Bearing Tool Set CBP-8 comes equipped with everything you need to get to work on your specialised cranks and bearings, taking them off and putting them back firmly and safely to keep your pedalling in peak condition. The set features a Power Torque compatible crank puller, crank removal extension plug and crank bearing removal adaptor as well as a bearing puller and setter which will also work with Ultra-Torque systems. Completing the set are protective pads and adaptors for use with both carbon and aluminium cranks, making it just the job for an often arduous task.
The T-handle screwdriver is the ideal handle shape that allows the transmission of particularly high tightening and loosening torque. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the softly rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. With holding function to securely hold the Torx screw on the tool. Special surface treatment of the blades for high corrosion protection and optimum fitting accuracy in the screw. Including a metal rack for storage. The rack can be placed on the workbench or hung on the tool wall. This toolset also features a metal rack for T-handle screwdrivers. The rack can be placed on the workbench or hung on the tool wall. For up to 7 Wera Torx T-handle screwdrivers.
Wera Tools 467/7 TORX HF T-Handle Screwdriver SetThe ideal tools for precise fitting, turning and tuning of Torx bolts on bike, the 467/7 TORX HF T-Handle Screwdriver Set is a 7-piece T-handle Torx set that is compatible with road, mountain bike (MTB) and electric bike (E-Bike) maintenance.The T-handle screwdriver is the ideal handle shape allows the transmission of particularly high tightening and loosening torque. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. With holding function to securely hold the TORX screw on the tool. Special surface treatment of the blades for high corrosion protection and optimum fitting accuracy in the screw. Including metal rack for storage. The rack can be placed on the workbench or hung on the tool wall. This toolset also features a metal rack for T-handle screwdrivers. The rack can be placed on the workbench or hung on the tool wall. For up to 7 Wera TORX T-handle screwdrivers. Features: Torx T-handles included: 1x TX 10 x 100 mm 1x TX 15 x 100 mm 1x TX 20 x 100 mm 1x TX 25 x 100 mm 1x TX 30 x 200 mm 1x TX 40 x 200 mm 1x TX 45 x 200 mm Metal Rack for T-handles: 1x 214 x 78 mmBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Adding this adaptor will allow you to work on Cannondale® Lefty™ wheels, as well as 12mm, 15mm, 20mm and 25mm thru axle front wheels. increasing the capabilities of the TS-2.2 and TS-3 Truing Stands by making them compatible with rear 135mm thru axle hubs, the Truing Stand Thru-Axle Adaptor TSTA will also allow for all rear thru axle hubs to be worked on with TS-8, TS-25, TS-15, TS-7 and TS-5 stands. Constructed from a durable ACME rod, two centring cones and turning knobs at each end, this is a vital device for making your Park Tool Truing Stand more adaptable.
Wera Tools Bicycle Set 2 Screwdriver SetIdeal for tooling jobs and tuning your road, mountain bike (MTB) or electric bike (E-Bike), the Bicycle Set 2 Screwdriver Set features a compact and durable 13-piece screwdriver set that includes 89mm bits to make bike maintenance easier and more precise.Tool specialist Wera presents Bicycle Set 2, a compact 13-piece screwdriver toolset with 89mm bits for bicycle maintenance and repairs. Supplied in a lightweight and robust folding pouch, this set is suitable for Road, MTB and E-Bikes. The set includes Wera's iconic ergonomic Kraftform bit hand holder for fatigue-free working. Plus, the Rapidaptor quick-release chuck, for fast bit change without the need for additional tools. The tough-absorbing bits prevent any premature breakage of the drive tip.Additionally, these tools feature Hex-Plus technology, which means the tool has a greater contact area with the screw. This prevents the screw from damage (being rounded out) over time, and additionally the greater contact surface area allows you to apply up to 20% more torque. Hex-Plus tools fit every standard hexagon screw socket you might find on a bicycle. Features: 1 x Kraftform bit hand holder with Rapidaptor quick release chuck 2 x Philips Head (PH) 89mm long Bits (PH 1, PH 2) 6 x Hex-Plus 89mm long Bits (2mm, 2.5mm, 3mm, 4mm, 5mm, & 6mm) 4 x TORX 89mm long Bits (TX10, TX20, TX25, TX30) 1 x Lightweight & robust folding fabric bag Size: 150mm x 110mm x 65mm Set Weight: 406gBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand.
Wera Tools 467/7 TORX HF T-Handle Screwdriver SetThe 467/7 TORX HF T-Handle Screwdriver Set drom Wera Tools is a compact and efficient workshop quality T-handle screwdriver set that features an ergonomically designed handle for comfortable performance throughout use. It also comes with a 17-piece bit set that is ideal for working on road, mountain bike (MTB) and electric bikes (E-Bike) and is a superb addition to any workshop or toolbox.Pouch with bits in a length of 89 mm. Includes torque screwdriver 7441 with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Suitable for manual and power tool operations. 17-piece; compact handle/interchangeable blade system for torque-controlled tightening. Includes torque holder 7441, settings from 1.2 to 3.0 Nm. Adjustable in 0.10 Nm steps. Simple setting of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Includes 16 bits with a length of 89 mm and a practical pouch for tidy storage. Pouch with 89-mm long bits. Includes 816 R Kraftform holder with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for manual and power tool operations; 17-piece. Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuckWera torque screwdriver. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value: audible click signal. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with ¼" hexagon head drive.851/4 Z bitsHigh quality bits for Phillips screws. Tough viscous for universal use. ¼" hexagon, suitable for holders. 855/4 Z bitsHigh quality bits for Pozidriv* screws. Tough viscous for universal use. ¼" hexagon, suitable for holders. * Pozidriv = registered trademark of European Industrial Service Ltd. 867/4 Z TORX BO bits with bore holeHigh quality bits for recessed TORX screws. TORX BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special BO tools have a bore hole to take up the pin. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 800/4 Z bitsTough viscous Wera bits for slotted screws for universal use. ¼" hexagon, suitable for holders. 840/4 Z bitsTough viscous Wera bits for hexagon socket screws for universal use. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. ¼" hexagon, suitable for holders. Features: Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck 851/4 Z bits 855/4 Z bits 867/4 Z TORX BO bits with bore hole 800/4 Z bits 840/4 Z bitsBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Kraftform Kompakt 60 KK Toolset features a workshop quality T-handle screwdriver set that features an ergonomically designed handle for comfortable performance throughout use. It also comes with a 17-piece bit set that is ideal for working on road bikes, mountain bikes (MTB) and electric bikes (E-Bike) and is a superb addition to any workshop or toolbox. Pouch with bits in a length of 89 mm. Includes torque screwdriver 7441 with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Suitable for manual and power tool operations. 17-piece; compact handle/interchangeable blade system for torque-controlled tightening. Includes torque holder 7441, settings from 1.2 to 3.0 Nm. Adjustable in 0.10 Nm steps. Simple setting of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Includes 16 bits with a length of 89 mm and a practical pouch for tidy storage. Pouch with 89-mm long bits. Includes 816 R Kraftform holder with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for manual and power tool operations; 17-piece. Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck Wera torque screwdriver. Variable torque setting option with the highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value: audible click signal. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive. 851/4 Z bits High-quality bits for Phillips screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 855/4 Z bits High-quality bits for Pozidriv* screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders. * Pozidriv = registered trademark of European Industrial Service Ltd. 867/4 Z Torx BO bits with borehole High-quality bits for recessed Torx screws. Torx BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special BO tools have a borehole to take up the pin. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 800/4 Z bits Tough viscous Wera bits for slotted screws for universal use. 1/4" hexagon, suitable for holders. 840/4 Z bits Tough viscous Wera bits for hexagon socket screws for universal use. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head is more or less eliminated. 1/4" hexagon, suitable for holders.
The TNS-4 makes it quick and easy to install star-fangled nuts used with 1 and 1-1/8 inch threadless headset systemsUsing a durable steel driver and built-in guide the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every timeThe unique design virtually eliminates pinched fingers
Made from a hard-wearing and long-lasting machined aluminium, this torsion beam-style wrench comes with a host of hex and Torx bits to suit the range of screws and fasteners found across your bike, as well as a Phillips and a Flat Head screwdriver attachment. The bits use a magnetic engagement to fit the wrench and are kept secure in their own cutout sections within the included softshell carry case. The driver tightens to between 2Nm and 10Nm and is easily set to your chosen torque by lining up the marker lines on the main shaft and wrench fitment. Durable and dependable, this Lezyne tool is a superb addition to your workshop or maintenance kit.
Silca thought long and hard about the design of the Italian Army Knife and have managed to reduce the thickness of the tool. The mid-length tools allow for the multi-tool to reduce its thickness by half. The mid-length tools allow the user to access recessed fasteners but are short enough not to suffer twist or over-torque damage commonly experienced by longer multi-tools. Each tool is forged rather than bent from hex stock, although a more expensive method, making the tool stronger. To finish the construction SIlca have double chromed the tools, fully stainless steel hardware and bushings help guarantee a long life free from corrosion. If you want pure quality and longevity the Silca Italian Army Knife will save you from many road or trail side blunders.