Pro-quality bottom bracket cup removal tool from LifeLine.
Plus, it's made from heat-treated steel for maximum strength and reliability. Compatability is only confirmed for offical Shimano components. The tool may not work when alternative brand chainring spiders are installed.
This preload bolt is a direct replacement for the original one that came with your Shimano crankset. It comes equipped with a tough 6061 aluminium build to prevent any axle crushing or ovality, while its longer thread prevents pull out. Another highlight is its smaller flange diameter, which ensures that the arm clamps the axle and is not restricted by the cap. This is a stronger replacement than the genuine Shimano bolt which comes as standard in your crankset. Compatibility: Compatible with most Shimano Hollowtech II cranksets including Shimano Dura Ace, Ultegra, 105, XT, SLX and DEORE. XTR - M9XX Series / M9000 Series XT - M8XXX Series / M7XX Series SLX - M7XXX Series / M6XX Series Deore - M61XX Series, M6XX Series, M5XX Series Saint - M8XX Series ZEE - M6XX Series EBike - M8000 Manufacturer's Part Number: BXPLB-BLACK
The tool is also fully compatible with any fork which requires a cassette tool for the top cap removal like the current RockShox range.
The Kraftform Kompakt 60 KK Toolset features a workshop quality T-handle screwdriver set that features an ergonomically designed handle for comfortable performance throughout use. It also comes with a 17-piece bit set that is ideal for working on road bikes, mountain bikes (MTB) and electric bikes (E-Bike) and is a superb addition to any workshop or toolbox. Pouch with bits in a length of 89 mm. Includes torque screwdriver 7441 with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Suitable for manual and power tool operations. 17-piece; compact handle/interchangeable blade system for torque-controlled tightening. Includes torque holder 7441, settings from 1.2 to 3.0 Nm. Adjustable in 0.10 Nm steps. Simple setting of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Includes 16 bits with a length of 89 mm and a practical pouch for tidy storage. Pouch with 89-mm long bits. Includes 816 R Kraftform holder with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for manual and power tool operations; 17-piece. Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck Wera torque screwdriver. Variable torque setting option with the highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value: audible click signal. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive. 851/4 Z bits High-quality bits for Phillips screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 855/4 Z bits High-quality bits for Pozidriv* screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders. * Pozidriv = registered trademark of European Industrial Service Ltd. 867/4 Z Torx BO bits with borehole High-quality bits for recessed Torx screws. Torx BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special BO tools have a borehole to take up the pin. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 800/4 Z bits Tough viscous Wera bits for slotted screws for universal use. 1/4" hexagon, suitable for holders. 840/4 Z bits Tough viscous Wera bits for hexagon socket screws for universal use. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head is more or less eliminated. 1/4" hexagon, suitable for holders.
These Hex-Plus L-Keys are ideal for working on Hex bolts and feature an L-shaped design, offering easier access for hard-to-reach fittings. They also feature a colour-coded high-grip plastic coating that makes identifying the correct key size easier and tooling more comfortable. High quality L-keys out of stainless steel for hexagonal socket screws by Wera. Stainless steel prevents the transfer of extraneous rust. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head is more or less eliminated. Come with hex ballpoint on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling around the corner screwdriving.
These workshop-quality screwdrivers are colour coded for easy identification and they are coated in high-grip plastic for added comfort and control. This set is a comfortable and efficient T-Handle screwdriver set with Wera's Holding Function (HF) to securely hold the screw on the tool. They also feature ergonomically shaped 2-component T-Handles with finger recesses for high power working and fatigue-free performance. The T-handle screwdriver is the ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. With holding function (HF) to securely hold the hexagon socket screw on the tool. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. 454 T-handle Hexagon Screwdriver Hex-Plus The T-handle screwdriver design is the ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.
This range of tools features Wera Tools Kraftform grips that offer multiple compounds to ensure an excellent balance of grip, torque and comfort. Tool specialist Wera presents Bicycle Big Pack 1, a 14-piece bicycle workshop toolset that includes T-Shaped Hex and Torx Keys, Kraftform Screwdrivers and chiseldrivers. Supplied with a wall-mountable rack for clearly arranged storage in the workshop, this set is suitable for Road, mountain bike (MTB) and electric bikes (E-Bikes). The T-Handle Hex and Torx Keys have a special handle shape with ergonomic recessed finger grips, allowing for fatigue-free working and easy operations on the bike whether you are tightening or loosening bolts. Their extra-short arm allows for the transmission of extremely high torques through the leverage of the long arm. Due to the special surface treatment, the blades receive a high level of corrosion protection, and the fitting accuracy of the screw is also optimised. The set includes Wera's iconic ergonomic Kraftform handles on the screwdrivers and chiseldrivers for fatigue-free working with no chance of blisters or calluses. The screwdrivers also feature laser-tip technology. A precisely focused laser creates a sharp-edged surface structure on the tip of the screwdriver. This Wera laser treatment results in an extreme edge allowing the screwdriver to 'bite' itself into the screw head, preventing any slips out of the recess. The Chiseldriver is the solution for jobs that require more than just screwdriving. For fastening, chiselling and loosening seized screws or hose clamps. Includes an integrated impact cap that extends service life and reduces the risk of splintering. This set also features Wera's Take it Easy colour coded tool size finder system, meaning it's quick to identify which Key you need for the job.
The T-handle screwdriver is the ideal handle shape that allows the transmission of particularly high tightening and loosening torque. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the softly rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. With holding function to securely hold the Torx screw on the tool. Special surface treatment of the blades for high corrosion protection and optimum fitting accuracy in the screw. Including a metal rack for storage. The rack can be placed on the workbench or hung on the tool wall. This toolset also features a metal rack for T-handle screwdrivers. The rack can be placed on the workbench or hung on the tool wall. For up to 7 Wera Torx T-handle screwdrivers.
Feed the guide cable through your frame using the magnet on your multi tool and the magnet on the guide cable to pass from exit to insert point. Then attach the correct asaptor from the multi tool to your cable that requires routing. Attach the magnet adaptor to this cable and connect the guide cable to the routing cable. Then simply drag the routing cable back through the frame by pulling on the guide cable. Sound tricky? It's really not. Check out the instructions added to the images and soon we'll make a video demonstrating how to use the tool!
The IB-2 features Park Tool’s unique I-Beam handle with 10 tools.
Suited to all modern wheel sizes from 14" kids wheels up to 29" MTB and 700c road wheels.