Just like their adult helmets, this Youth Sidetrack II Cycle Helmet features the same tough and protective fusion In-Mould polycarbonate shell. Pioneered by Bell, this design sees the tough and durable outer bonded directly to the shock-absorbing EPS foam inner. This gives you a helmet that can take the knocks of daily mountain bike use and offers excellent protection in the event of a crash. Getting the right fit is essential for safety and here you'll get the easy to use and precise adjustment of the Ergo fit system. The dial system allows one-handed adjustment, even on the go. Complementing this are the No-twist tri-glides. These quick-adjust fasteners keep the straps flat and positioned perfectly. Less fuss. More mountain biking time. Comfort is also enhanced thanks to the Sweat Guide brow padding, this draws away moisture before it can cause discomfort or sting the eyes.
With a refined look suited to the modern cyclist, the Youth Youn-I 2.0 Cycling Helmet is at home on leisure rides, commutes to school or work and for a bit of urban exploration. The in-mould technology fuses a tough and durable outer to an EPS foam core. The EPS core provides shock absorption and impact protection while the durable outer ensures the Youn-I can easily take the demands of daily use in its stride. All-round protection is also enhanced thanks to the deeper temple and rear. Safety features continue by the way of a built-in rear LED light. This offers 180-degrees of visibility during day and night. It works alongside reflective details ensuring you're easier to spot on the road. Once you're on your bike and riding, the 17 air vents keep you cooler and more comfortable. Inner flow channels direct air over your head, drawing in cool air and pushing out warm, moist air to prevent discomfort. Getting the right fit is easy too. The rear dial allows quick adjustment and a form-fitting inner ring hold the Youn-I securely in place. With a simple but modern look, this bike helmet meets the needs of both young cyclists as well as many women with smaller heads. The Youn-I boasts a simple, urban and fashionable look that appeals to both generations. Technology:
With a flattering low-profile design, the C1.0 is designed to sit close to your head. The ergonomic dial provides a precise, custom fit for all-day comfort. The visor keeps the sun out of your eyes on the trails and is easily removable so you won't look out of place on the roads, too. In-mould construction allows the hardened polycarbonate shell to be fused to the shock-absorbing EPS foam liner. Combining these two layers keeps the weight down and allows for 19 vents to aid ventilation on hot rides without compromising performance. The C1.0 is a helmet for cyclists looking for versatility without compromise.
Be it hitting target numbers during a training ride or scrapping for space in amongst the rush of a bike race sprint, the FS260-Pro Helmet II keeps you feeling safely protected during all your cycling adventures. However, should you be unfortunate to crash, the in-mould construction features an impact-absorbing foam core to protect against head injury. This protective core is fused to a durable polycarbonate outer shell. This adds structural strength while minimising weight and offers extra toughness for your regular riding. Easy Adjustment. Cool Airflow. The FS260-Pro isn't just protective, it's comfortable too. In order to get a secure and comfortable fit, Endura uses their micro-adjust cradle system. With a quick twist, you can get just the right fit for your head and ensure a stable fit in the event of a head impact. You'll also enjoy excellent airflow, with copious large vents leading to inner channels, directing cooling air smoothly over your head. A rush of cool air in. Damp, warm air pushed out. Working alongside this cool airflow are the soft-touch pads. As you pick up the pace and build up a sweat, these pads draw moisture off your head, preventing the sting of sweat in the eyes. They're removable too, letting you wash and freshen them up for long-term comfort.
Perfectly balancing comfort and protection, the M1 is great for all your trail rides whether you’re racing or taking part in a full day of uplifting. The internal muzzle is foam padded, cushioning your head from impacts and abrasions while keeping debris out from the back vents. The helmet comes with 17 vents, throughout the design, that offers 360-degrees of ventilation with each protected from incoming debris with a mesh covering. The adjustable peak is ultra-durable, kept in place with two aluminium screws and a central thumb screw. Meanwhile, the wide face opening extends your vision and makes it easy to fit even the largest goggles.
Hooray for bikes. Get your smallest family members on two wheels and you'll be fuelling a lifetime passion for the sheer fun they can bring. And to make sure they bike safely and confidently, you can't beat the Hooray Kid's Helmet. MET has tweaked the construction so it's more protective than ever. The in-mould construction features a polycarbonate shell, making it tough and durable - perfect for fending off light bumps and scratches that come with regular riding and the rough and tumble of toddler life. Meanwhile, the shock-absorbing foam inner is there to offer protection should they take a tumble. Their Bimbi Secure Technology also removes contact between the helmet and fontanelle, the most fragile part of a child’s head. Extended coverage offers all-around head protection while the flat-shaped back is compatible with bike seats. Getting your little ripper's cycle helmet adjusted is quick and easy too, thanks to the MET Safe-T JR Fit System. No fiddling or fuss, just twist the dial and they can go have fun.
The Agilis Cycle Helmet is all about maximum ventilation, minimal bulk and optimal protection levels and all the while offering outstanding value. A total of 32 vents, complete with internal channels, ensures airflow is turbo-charged over the head while the Coolfit padding keeps sweat in check and it won't itch thanks to the anti-microbial finish preventing bacterial build-up. The Roc Loc® 5 fit system gives you optimal control of the fit ensuring the helmet stays in place and is most effective should you unfortunately crash. Hardbody™ shell The Hardbody shell wraps from the outside of the helmet to the inside, giving a significant boost to durability compared to regular helmets. The in-mould construction sees a tough polycarbonate outer shell fused directly with the helmet’s impact-absorbing foam liner. This in-mould fusion process allows Giro to optimise ventilation without compromising protection, so in-mould helmets can be both lighter and cooler than traditional helmets. Roc-Loc® 5 fit system The industry benchmark in comfort, stability, adjustability and weight savings. In addition to enhancing the fit and comfort of Giro helmets, Roc Loc® 5 allows you to easily custom tune the fit tension and the fore-aft tilt of the helmet in seconds using a single hand. And it’s lighter than comparable systems too, making it the ultimate in skull-hugging luxury.
Take your riding up a gear with the dhb R3.0 Road Helmet. Engineered to provide peace of mind while on the road, there is no compromise on style thanks to its aerodynamic and low-profile design. With 20 large intake vents, it will keep you cool and comfortable. In-mould construction allows the hardened polycarbonate shell to be fused to the shock-absorbing EPS foam liner. By combining these two layers, weight is kept to a minimum. The liner is constructed from recycled material and the removable pad set is crafted from sweat-wicking fabric for all-day comfort.
Trail-Ready Performance Using Giro's In-mould construction method, when it comes to head protection the Radix Cycle Helmet is a tough and tenacious performer. AN EPS liner provides impact protection in the event of a crash, soaking up forces that would otherwise directly hit your head. Fused to the shock-absorbing liner is a durable polycarbonate outer shell, keeping weight to a minimum while taking on those knocks and scratches from trailside overhang. You also get Giro's P.O.V. Visor, with 15 degrees of up-down adjustment. Three-riding positions get it in just the right place to keep the sun off the eyes, plus a high position to let you pull goggles up above your brow. Feel the Rush Heat and sweat are quick to build when mountain biking. But here the Wind Tunnel™ ventilation of the Artex comes into play. This system has carefully positioned vents, 25 in total, bringing in fresh air to the front where it meets internal exhaust channels that thrust cool, fresh air over and around your head while forcing heat and stale air out. This significant increase in air channelling makes a difference that riders will immediately feel and appreciate. Roc Loc® 5.5 Fit System Leading the way in ease of adjustability and comfort, the Roc Loc® 5 Fit System lets you dial in the fit of your helmet quickly and easily. It allows for precise single-handed adjustment via the rear dial as well as fore-aft tilt adjustment. It’s lighter than comparable systems too, making it the ultimate in skull-hugging luxury.
With the rush of wind in your ears and the blur of riding fast, mountain biking is certainly a thrilling pursuit. But when you're pushing your limits you need confidence you'll be protected should you step over those limits. And with the tough in-mould construction of the Rogue Helmet on your side, if you do crash you have the protection you can trust. All-around Head Protection The in-mould construction sees an EPS foam liner directly fused to a tough and durable polycarbonate shell. The outer provides protection from those minor knocks and scrapes that are common when mountain biking. The EPS foam, meanwhile, provides shock absorption in the event of an impact. The stylishly aggressive design not only looks the part but the extended coverage gives extra protection across the temples and back of the head. Cool Air. Clear View. Not only is the Rogue protective, but it also has features that boost comfort and performance on the trails. Firstly, 16 vents, with internal channelling, ensure you enjoy the cool flow of air to your head. You also have an adjustable visor, allowing you to keep sun and rain off your eyewear. The adjustability allows you to stow goggles securely, perfect for climbs or rest stops. And if you ride with sunglasses, the visor has a sunglass storage feature too. Quick Adjustment A secure, comfortable helmet is a safer helmet. And it's easy to get the Rogue secure and comfortable thanks to the Safe-T Heta Fit System. A rear dial allows quick and precise adjustment and the 360-degree head belt prevents pressure points. Inside, the soft pads add to comfort too. And they're washable, allowing you to keep everything fresh.
Falling off is all part of the mountain biking game and when you do have a body to the ground interface, the Trail EVO Helmet offers reliable head protection. The MTB specific shape of the Trail EVO offers all-round protection and in-mould technology provides durable safety when you hit the dirt. This in-mould tech sees a tough and durable outer shell directly moulded to an impact-absorbing foam inner. This provides both excellent structural strength as well as head-protection in the event of a crash. The strength also allows iXS to boost the number of vents without compromising safety. Each vent is carefully positioned to maximise airflow and internal channels move the air through the helmet creating a rush of cool air over your head. Wave goodbye to hot and sweaty lids at the end of your ride. The EVO helmet also sports iXS' ErgoFit UltraTM system to provide fabulous comfortable on the bike. The system allows adjustment both vertically and horizontally letting you get a precise fit, leaving you to focus on your ride where your biggest concern is now how much dirt you can kick up and how quick you can rail those trails. With an adjustable visor, you can keep the sun out of your eyes and an impact quick release lets it fold away in the event of a crash, protecting your neck from rotational forces. Tough, stylish and protective, the Trail EVO Helmet gets you on the trails safe in the knowledge you're protected should gravity grab you and drag you to the ground unexpectedly.
From the heat of climbing summer mountain passes to the thrill of the descent back to the valley again, the ARO3 LITE Cycling Helmet delivers exceptional comfort and smooth airflow as well as cutting-edge safety. In the event of a crash, the EPS protective foam core dissipated damaging forces that would otherwise cause you to suffer head injuries. This is covered by a tough and durable polycarbonate shell, adding structural support and strength while making this a cycling helmet you can use day after day. And you'll also find, at just 295 grams in weight, this is a cycle helmet you'll barely notice. You'll also enjoy optimised airflow at both high and low speeds. Large inlet and exhaust vents allow cool air to flood in the front and for damp air to be evacuated easily out the back. The result is more comfortable cycling even when temperatures begin to rise. Oakley, famed for their sunglasses, have also incorporated an eyewear dock to store your shades should the sun disappear. A Winning Fit Engineered with a BOA® 360-degree fit system, using a TX1 lace that lies flat against your head, adjusting your fit is brilliantly quick and simple. And it's possible to make adjustments even on the go. With the right fit, you can be confident in getting the best protection in the event of a fall while also offering outstanding comfort. The use of X-STATIC® brow pads keep you feeling comfortable too, with sweat wicked away before it becomes an issue. The pads are also anti-odour, ensuring no nasty smells after a tough training session.