This XL-sized fender is specifically designed for compatibility with all front suspension forks and bikes with disc brakes only. It features a soft deformable nose, which is developed to not clog up with mud as you weave your way from trail to trail. Crud has also equipped this full-front mudguard with an easy-to-install design that allows you to fit it to your front fork in seconds without the need for any tools. As a result, it stays in place during the most demanding of MTB rides, while keeping you protected against unwanted spray and dirt. Manufacturer's Part Number: XLF
SKS COMMUTER MUDGUARD SET WITH SPOILERFull length mudguard set with zink-plated and pre-assembled twin-parallel stays.• Stays slide-in adjustable brackets for an optimal and easy fit• Secu clip “break-away” fittings on front stays avoid blocking of the wheelwhen an object gets between tyre and mudguard• Mudguards are constructed from durable PET plastic• Available in road hybrid and MTB sizes (700c x 35 45mm or 26” x 60mm)
LifeLine Narrow Road Fixed Mudguard SetLifeLine's Narrow Road Mudguard Set is flexible and lightweight with all the mounting hardware included. These mudguards are made of PET/aluminium and are quick and very simple to install. They are UV and corrosion resistant, compatible with all calliper and disc brakes, and only compatible with frames and forks that feature mudguard mounts.Features:Material: PET/AluminiumLightweightFlexibleScratch guards provide additional durabilityUV and corrosion resistantQuick and easy to installAll mounting hardware includedOnly compatible with frames and forks that feature mudguard mountsCompatible with calliper and disc brakesBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Narrow Road Fixed Mudguard SetLifeLine's Narrow Road Mudguard Set is flexible and lightweight with all the mounting hardware included. These mudguards are made of PET/aluminium and are quick and very simple to install. They are UV and corrosion resistant, compatible with all calliper and disc brakes, and only compatible with frames and forks that feature mudguard mounts.Features:Material: PET/AluminiumLightweightFlexibleScratch guards provide additional durabilityUV and corrosion resistantQuick and easy to installAll mounting hardware includedOnly compatible with frames and forks that feature mudguard mountsCompatible with calliper and disc brakesBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
For 26' Wheel The DeFender™ front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits MTB 26' tires. ADJUSTABLE Rear angle adjustable MATERIAL Injected molded high impact resistant plastic ADDED FEATURE Highly polished underside SIZE 58.4 x 16 x 8.9 cm / 23” x 6.3” x 3.5” (FX)55.9 x 15.2 x 10.2 cm / 22” x 6” x 4” (RX) WEIGHT 180 g / 6.33 oz (FX)200 g / 7.04 oz (RX) ATTACHMENT (FRONT) QR fork attachment fits ø18 - ø26 mm steerer tube (FX) ATTACHMENT (REAR) QR seatpost attachment (RX)
RapidRacerProducts ProGuard Standard Front MudguardReady for the rigours of modern mountain biking, the ProGuard from RapidRacerProducts protects you from spray, mud and anything else your tyres can flick up from the trails. Whether you’re taking on enduro or downhill race or just weekend trail rides, this strap-on front mudguard offers excellent protection.Features: Material: Special polypropylene mix Finish: Soft high gloss finish Length: 494mm Wheel Compatibility: 26", 27.5", 29"Tyre Compatibility: Up to 3" widthFork Compatibility: All forks including Boost (reverse arch forks not compatible) 6x Zip Ties included with each guard Indent at fork brace for additional clearance 24 crown holes for a massive range of mounting options Long front to cope with high-speed spray Can be used with any fork travel Snap-off hole covers reduce spray from travelling through unused holes Smaller turn down at front for better tyre clearance and to reduce blockages Rear flick offers even more protection when the wheel is turned Sticker recess offers greater protection for sticker adhesive Seal protection increased with RapidRacer acclaimed seal shield design Crash replacement discount scheme (register at rapidracerproducts.com) Weight: 119g (guard only)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Full length mudguard set with zink-plated and pre-assembled twin-parallel stays.• Stays slide-in adjustable brackets for an optimal and easy fit• Secu clip “break-away” fittings on front stays avoid blocking of the wheelwhen an object gets between tyre and mudguard• Mudguards are constructed from durable PET plastic• Available in road hybrid and MTB sizes (700c x 35 45mm or 26” x 60mm)
Full length mudguards offer the maximum in protection from standing water keeping both you and your bike clean and dry even in the worst conditions. The LifeLine Narrow Road Mudguard Set features a PET/Aluminium construction with steel wire stays making them lightweight and flexible. The PET/Aluminium construction is also extremely durable and resistant to corrosion and damage from UV light. Plastic scratch guards on the ends of the mudguard blades provide additional protection. Fully adjustable stays ensure a perfect fit, preventing rattles or fouling on any other components. Low profile stay ends reduce the chances of catching your foot when cornering. The LifeLine Narrow Road Mudguard Set is compatible with calliper or disc brakes and comes complete with full installation instructions and all mounting hardware. Please Note: These mudguards are designed to fit with 700c wheels but the metal stays may require cutting with a hacksaw or heavy duty wire cutters during fitting.
Full front mudguard, fits in seconds, guaranteed no clogging. With its soft nose, the XL cannot clog up with mud. Stays in place during the roughest ride.Key Features:Fits all front suspension forks,No tools needed,Guaranteed no clogging,Fits in seconds,For disc forks only,Adjustable height.
Key Features:Optional mud guard designed specifically for the Fox 36 and 38 (2021 models and newer).,Proprietary and sturdy 4-point direct-mount attachment..
Don't let rain and mud slow you down. With the Cube Acid Mud Blocker for your rear wheel, full-gas trail riding knows no limits. An extra spray protection lip stops the dreaded skunk stripe on your back. Comes with 6 cable ties for the perfect hold and an optimised design with elongated sides for maximum stability. The included protection foils effectively keep frame scratches at bay.Protects against wheel sprayQuality plastic constructionFor 26", 27.5" and 29" tyresMaximum tyre width up to 2.6"Includes 6 cable tiesFrame protection foils to prevent scratching the seat staySpray protection lipOptimised adjustment for maximum stabilityWeight: Short 190g / Long 220gDimensions: Short (WxL) 95 x 528mm / Long (WxL) 95 x 605mm
High-speed descents can get really dirty in bad conditions. That's why Cube came up with the Acid Mud Shield. It keeps the spray off your face so you can focus on the important stuff: shredding to your heart's content. It bolts on quickly and easily and is just as uncomplicated to remove. The Mud Shield's extended wings with rubber pads protect your fork against scratches and fend off dirt. Compatible with Fox, Suntour, Öhlins and Marzocchi forks.Protects the face from front wheel sprayQuality plasticFor 26", 27.5" and 29" MTB forksMaximum tyre width up to 2.6"Includes bolts for Fox 32, 34, 36, 38, 40 (2021), 49, AWL, SR Suntour, Ohlins and Marzocchi forks with Fox chassisFork scratch protectionIntegrated fork spray protectionOptimised adjustment for maximum stabilityWeight: Short 105g / Long 124gDimensions: Short (WxL) 80 - 125 x 340mm / Long (WxL) 80 - 125 x 405mm