The ACID Mudguard Set MTB 60 turns any mountain bike into a great all-round mode of transport! The set is compatible with most 27.5"-29" mountain bikes up to a max. tyre width of 2.25". Precision attachment is fast and foolproof thanks to the special adapter solution for CUBE mountain bikes from model year 2019 onwards and handy eyelet guides for CUBE frames from model year 2019 onwards. Extremely sturdy courtesy of the non-flex profile. These mudguards harmonise perfectly with ACID luggage carriers.Key Features:Fits Most 27.5"-29" Mountain Bikes,Max. Tyre Width 2.25",Integrated Adapter Solution For Cube Mountain Bikes From 2019 Model Year Onwards,Glossy Details,Acid Adapter System,Non-Flex Shape,Drill Hole Indications For Cube Frames From 2019 Model Year Onwards .
The Fox Fork 36 and 38 Mud Guard is an optional mud guard designed specifically for the new 36 and 38 forks (2021 models only).Proprietary and sturdy 4-point direct-mount attachment.Sturdy 4-point attachmentGenuine OE parts
M Parts Commute Mudguards are a top choice for riders who want great value, reliable mudguards that are built to last. Now in their 2nd generation, the Commute Mudguards are tough, versatile and ready to keep the elements at bay.Factory pre-installed 3.2mm stainless steel stays for quick and easy assemblyPolycarbonate guard material is incredibly tough and virtually unbreakableSupplied with M5 and M6 stainless hex bolts for fittingApproximately 600g including fittingsIncredibly easy to fit, the Commute Mudguards come with the durable stainless steel stays pre-installed from the factory, so you can have them fitted in mere minutes. Keeping the elements away are the massively strong polycarbonate guards, which are incredibly tough and virtually unbreakable; they're certainly not afraid of taking abuse from the daily commute! Supplied with all you'll need to get going, the M Part Commute Guards are tough, versatile and incredible value.
M Parts Commute Mudguards are a top choice for riders who want great value, reliable mudguards that are built to last. Now in their 2nd generation, the Commute Mudguards are tough, versatile and ready to keep the elements at bay.Factory pre-installed 3.2mm stainless steel stays for quick and easy assemblyPolycarbonate guard material is incredibly tough and virtually unbreakableSupplied with M5 and M6 stainless hex bolts for fittingApproximately 600g including fittingsIncredibly easy to fit, the Commute Mudguards come with the durable stainless steel stays pre-installed from the factory, so you can have them fitted in mere minutes. Keeping the elements away are the massively strong polycarbonate guards, which are incredibly tough and virtually unbreakable; they're certainly not afraid of taking abuse from the daily commute! Supplied with all you'll need to get going, the M Part Commute Guards are tough, versatile and incredible value.
A set of Deflector mudguards from Zefal consisting of RS75 rear and a FM60 front offering you protection from the wet and mud you often find yourself riding in this country. They are suitable for full suspension mountain bikes, are easy to install and are compatible with both 27.5 and 29 wheels.Rear: The Deflector RS75 provides solid protection for all mountain bikes. Through its unique, close-to-the-wheel mounting, it is both unobtrusive and very effective. With its suspension arm mounting, the Deflector RS75 also works on all types of suspension bikes.MD-Fix System: Universal mounting system. Accurate setting with double adjustmentFull suspension ready: Perfectly adapted to all types of suspension bikesMade for large wheels: Optimal protection for 27.5" and 29" wheelsAdjustable: Perfect adjustment to any bikeTech Specs:Material: Fibre-glass reinforced polypropyleneDimensions: 585mm x 81mm to 92mmMounting: MD-FixWheel Diameter: 27.5", 29"Protection: Very HighMax. tyre width recommended: 2.6"Protection: Very HighWeight: 341gFront: Deflector FM 60 mudguards ensure great protection even on rough terrain. Specially designed for mountain biking, they are easy to install and fit perfectly.Dual Material Spoiler: Better protection and brings flexibility to the fender.Universal: Compatible with all kind of forks.Material: Technopolymer resin with dual material spoilerFixation: On steerer tube - Adjustable from 20 to 33.7mmBlade Width: From 60 to 73mmWheel Diameter: 26",27.5",29"Weight: 145gPair Weight: 486g
Flexible and Durable Mudguard Made from polypropylene, the Proguard Max Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Maximum Protection RapidRacerProducts offers the best protection in the world, this version is 68mm longer at the rear. No other mudguard offers more protection. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer - 21mm longer - than some available offerings as this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screw driver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the Proguard Max Mudguard as a means of offering greater protection for your seals from high velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
RapidRacerProducts ProGuard Max Front MudguardShield yourself from unwanted dirt and spray when tackling tough terrain thanks to the ProGuard Max Mudguard from RapidRacer. The Max model features a longer coverage length of 21mm at the front and 68mm at the back to help you stay mud-free. Features:Indent at fork brace for additional clearance24 crown holes for a massive range of mounting optionsCan be used with any fork travel6x Zip Ties included with each guardWheel Compatibility: 26", 27.5", 29"Tyre Compatibility: Up to 3" widthFork Compatibility: All forks including Boost (reverse arch forks not compatible)Weight: 133g (guard only)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
3.0mm twin-parallel, stainless-steel stays are light and strong and provide secure support. Stays slide in adjustable brackets for an optimal and easy fit. Secu Clip 'break-away' fittings on front stays offer a secure yet safe union with the fork. Fenders are constructed from PET plastic and carry an aluminium foil insert, making them durable and light. Mud flaps front and rear provide enhanced protection. Pre-assembled for an easy fit. Supplied with everything you need to fit the mudguards, including a full fitting kit, allen key, braze-on bolts and a snap-fit sliding bridge for the rear.
SKS Commuter Hybrid Mudguard SetA high quality, low cost, full length mudguard set with high quality, stainless-steel fittings. Multiple sizes to suit several different wheel or tyre sizes.Features:3.0mm twin-parallel, stainless-steel stays are light and strong and provide secure support. Stays slide in adjustable brackets for an optimal and easy fit. Secu Clip 'break-away' fittings on front stays offer a secure yet safe union with the fork. Fenders are constructed from PET plastic and carry an aluminium foil insert, making them durable and light. Mud flaps front and rear provide enhanced protection. Pre-assembled for an easy fit. Supplied with everything you need to fit the mudguards, including a full fitting kit, Allen key, braze-on bolts and a snap-fit sliding bridge for the rear. Weight: approximately 495g per pair. Colour available: Black and SilverFittings: Included
Full length mudguard set with zink-plated and pre-assembled twin-parallel stays.Key Features:Stays slide-in adjustable brackets for an optimal and easy fit,Secu clip break-away fittings on front stays avoid blocking of the wheel when an object gets between tyre and mudguard,Mudguards are constructed from durable PET plastic.
RapidRacerProducts ProGuard Rear MudguardSuper-protective against the mud, muck and spray of the enduro run, this rear mudguard does all it can to keep you clean on every ride. Dotted with 43 snap-off top holes to fit straight braces between the seat stays and an optimised indent which increases tyre clearance by 4mm, it is the ideal mudguard for a variety of wheels. Made from a durable polypropylene, it protects your rear suspension as well as the rest of your back end, making it a perfect choice for the daring downhill rider.Features:Material: Polypropylene with gloss finishProtection: Seal ShieldWheel Compatibility: 26", 27.5", 29"Tyre Compatibility: Up to 3"Length: 352mmWeight: 64gBuy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Topeak Defender XC11 Rear Bike MudguardWith its simple tool-free seatpost mounting collar meaning it can be fitted in seconds, the Defender XC11 gives your back wheel excellent coverage for riding on wet and muddy terrain. Topeak has made it from impact-resistant plastic so it’s ready for all the abuse that the trails can hand out. Plus, the easy to use mount on this mudguard is compatible with seatpost sizes ranging from 25.4-34.9mm. It’s also suitable for tyre widths up to 2.5”, ensuring compatibility with wide mountain bike (MTB) tyres.Features: Material: Injection Moulded High Impact Resistant Plastic Wheel Size: Separate options for 27.5" and 29" wheels Maximum Tyre Width: 27.5": 27.5x2.5"; 29": 29x2.5". Highly polished underside Quick Release Seat Tube Attachment Two-Tone Injected High Impact Resistant Plastic Multiple Angles Adjustable Dimensions: 27.5": 62x10.2x7cm / 24.4 x 4" x 2.8"; 29": 67x10.2x7.5cm / 26.4" x 4" x 3" Weight: 27.5": 215g/7.57oz; 29": 220g / 7.74ozBuy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.