Stylish cycling pleasure with a safety system A brilliant performance! The SKS BLUEMELS BASIC mudguard set can not only be perfectly integrated onto the bike but also reliably protects against dirt and spray water. Thanks to the flexible sandwich construction in which ultra-fine aluminium strips are embedded in a plastic coating the mudguards are extremely robust rigid and corrosion-resistant. With its shiny black surface and black fastening components it also leaves nothing to be desired in terms of appearance. The ASR safety system uncouples the stays should branches become trapped between the spokes so the wheel is unable to jam. The V-stays with fixed bridges guarantee individual adjustment. The bottom bracket cutouts make mounting possible even when installation clearance is small. Includes accessories and stays. FEATURES Wheel size | 20'-29' Tyre width | 35 mm | 45 mm | 53 mm | 55 mm | 60 mm | 65 mm | Colour | black Material | plastic 27.5'-29' 65mm 27.5'-29' 69mm Sandwich construction made of aluminium/plastic V-stays with fixed bridges for flexible adjustment ASR safety system Bottom bracket cutouts
Where colour comes in! The BLUEMELS STINGRAY mudguards from SKS with the matt black look and the coloured stripes enhance the bike with a great style. The black struts and the edge protector with the SKS logo make the look just perfect. The cool mud flaps guarantee optimal protection against splash water and dirt. The mudguards are robust and rigid. Fenders feature a sandwich design with superfine aluminium strips embedded in plastic sheathing. The SECU Clip safety release system releases stays should branches become trapped between the mudguard and the front wheel. Includes a struts kit a stainless steel fixed bridge and mounting materials. Made in Germany. weight: 553 g wheel size: 275' (650b)' 28 ' tyre width: 28-38 mm length front fender: 680 mm length rear fender: 1185 mm
VELOFLEXX - A new addition to the Velo family! The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be mounted at the top of the seat bar without tools using rubber straps. This mounting solution no longer requires the brake bridge where the brake caliper is usually mounted. At the front the VELOFLEXX is mounted to the fork bridge with a rubberised hook and loop fastener or a cable tie. The frame adapters enable it to be mounted to any fork. Furthermore the angle of the adapters can be adjusted. The black-coated stays provide even greater support. They are fastened with hook and loop fasteners (front) and rubber straps (rear) without the need for tools. The disassembly is also quick and hassle-free. The VELOFLEXX set is available in three different widths and suitable for fitness bikes mountain bikes (Cross Country/All Mountain) and city bikes. Hook and loop fasteners and rubber straps are included in the scope of delivery. Key Facts: Flexible but sturdy Tool-free assembly and disassembly Frame adapter with adjustable angle Ideal solution for disc brake bicycles Wheel Size:26' 275' 28 ' / 29” weight: 580g / 600g / 625g
The Bluemels mudguard set comes in two colours (silver & black). Matt black and reflective versions are also available.45mm wide with fixed bridges3mm stainless steel staysFront angle sliding bridges and fixed bridges made from stainless steelSecurity fastening ASR joint angle adjustableWheel Size: 28” (700c)SKMBMR3528B – 700C x 45mm Reflective blackSKMBMR35286 – 700C x 45mm Reflective silverSKMBMR4528B – 700C x 45mm Reflective blackSKMBMR45286 – 700C x 45mm Reflective silver
Mudguard set made of a robust sandwich design A brilliant performance! The SKS BLUEMELS BASIC mudguard set can not only be perfectly integrated onto the bike but also reliably protects against dirt and spray water. Thanks to the flexible sandwich construction in which ultra-fine aluminium strips are embedded in a plastic coating the mudguards are extremely robust rigid and corrosion-resistant. Stylish cycling pleasure with a safety system The ASR safety system uncouples the stays should branches become trapped between the spokes so the wheel is unable to jam. The V-stays with fixed bridges guarantee individual adjustment. The bottom bracket cutouts make mounting possible even when installation clearance is small. Includes accessories and stays. FEATURES Wheel size | 20'-29' Tyre width | 35 mm | 45 mm | 53 mm | 55 mm | 60 mm | 65 mm | 69 mm Colour | black silver Material | plastic 28' 35mm 28' 35mm Silver 28' 45mm 28' 45mm Silver 28' 55mm 28' 55mm Silver Sandwich construction made of aluminium/plastic V-stays with fixed bridges for flexible adjustment ASR safety system Bottom bracket cutouts
The STINGRAY mudguards supplement our BLUEMELS range in the accustomed quality with modern colours in a matt design. First-grade plastic with aluminum core for high impact resistance. New quick-mounting fixed end caps for the stays. Automatic stay release safety system for the front. Elegant matt finish and edge protectors.art.No.: 11435color: lime green 11435 · blazing red 11432 · ocean blue 11433 · grey 11434wheel size: 28 'profile width: 45 mmlength front fender: 680 mmlength rear fender: 1185 mm
A high quality great value set of full length mudguards. 3.2mm Stainless Steel Stays and fittings for long life Virtually unbreakable polycarbonate guard material Available in a range of widths sizes and colours A must have extra for any commuter bike Approx 520 grams for full set with fittings
The ultimate clip-on mudguard set for road bikes. Key Features:Raceblade set for max. tyre width up to 25mm, Raceblade XL up to 32mm. ,The smart, double hinged quick release fitting system also fits aero forks and is compatible with disc brakes. ,Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. ,Superlight extra long mud flaps give additional spray protection. ,Includes adhesive protection kit to avoid damaging the paintwork.,. Mudguard length, including mud flaps:Front : 565mm,Rear : 730mm.
Fits 26"-29" wheel sizes.The XC1 is a lightweight, two-piece, moto inspired front fender that attaches to the suspension fork lowers for a closer fit to the tire and excellent mud/spray protection. A precision clamp assembly secures the fender to the fork’s lower legs and a special safety feature allows it to disengage if a large obstruction enters the wheel. Features a highly polished underside to prevent mud buildup and aids in cleaning. AttachmentsTwo Pieces QR Bolt-on Fork Attachment Fits ø36 - ø48.5 mm Fork Legs.MaterialTwo Tone Injected High Impact Resistant Plastic.Added FeaturesAutomatic Obstruction Disengagement,Highly Polished Underside.Weight350 g / 12.32 oz .
A precision clamp assembly secures the fender to the fork’s lower legs and a special safety feature allows it to disengage if a large obstruction enters the wheel. Size (L x W x H): 33 x 24 x 19cm/ 13” x 9.4” x 7.5”
RapidRacerProducts ProGuard Bolt On Front MudguardThe Bolt On Front Mudguard from RapidRacerProducts is a direct-mount mudguard that holds in place without the need for velcro or zip-ties and is compatible with all main suspension fork designs. What's more, it offers exceptional protection from unwanted spray when hitting the trails. Perfect Mudguards for Enduro, Downhill and Trail RidingThis mudguard design is perfectly suited for the rigours of modern mountain biking. It ensures superb all-weather protection for anything from Enduro and Downhill racing, to weekend Trail sessions with friends. And, since it’s made from RapidRacerProducts’s unique polypropylene, it gives a superbly flexible and ultra-durable performance at a low weight.Superb Protection from Mud and SprayOffering high protection with a superbly reliable construction, this mudguard is available in two sizes that are suited to all riding styles and weather and terrain situations. The Standard offers optimum levels of protection from mud and spray, whereas the Mini provides good protection in a low-profile and more discreet package. Plus, their wide design and longer rear with its flick section ensure spray protection even when cornering hard and when in the air. These guards also feature a Seal Shield to protect your fork seals by keeping dirt away from this area. This means your forks perform better for longer and will not require servicing as often, so you can spend more time on the trails and less time in the workshop.Features:Material: RapidRacerProducts unique polypropylene mix which gives great flexibility, durability and strengthEasy to install or remove with no zip ties or Velcro strapsHeight adjustability by 6mm and angle adjustability for a better fit if needed via 2 tilt brackets supplied2 Thick rubber pads on the sides protect your forksMatte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protectionLong front to protect from high-speed mud and spraySmaller turn down at the front for better tyre clearance and to reduce mud blockagesLong rear with flick design offers more protection especially during corneringSeal Shield increases protection and extends fork service intervalsWheel Compatibility: 26” 27.5” 29”Tyre Compatibility: up to a 3” tyreWeight: Standard: 130g; Mini: 104gFork Compatibility:FOX 32, 34, 36, 49 - Std & Boost (not FOX 40 in 26” or 27.5” without adapter bracket)New Marzocchi forks (using the FOX chassis)Ohlin's forksSR Suntour (models with unthreaded straight through the hole in the fork brace require a Sleeve Pack to mount ProGuard BOLT-ON Click Here)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Topeak Defender XC1 Front MudguardThe XC1 is a lightweight, two-piece, moto inspired front fender that attaches to the suspension fork lowers for a closer fit to the tire and excellent mud/spray protection.A precision clamp assembly secures the fender to the fork’s lower legs and a special safety feature allows it to disengage if a large obstruction enters the wheel. Features:Attachment: Two Pieces QR Bolt-on Fork(Fits ø36 - ø45mm Fork Legs)Material: Two Tone Injected High Impact Resistant PlasticAdded Features: Automatic Obstruction Disengagement Size (L x W x H): 33 x 24 x 19cm/ 13” x 9.4” x 7.5” Weight: 350g/12.32ozBuy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.