The smart, double hinged quick release fitting system also fits aero forks and is compatible with disc brakes. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Superlight extra long mud flaps give additional spray protection. Includes adhesive protection kit to avoid damaging the paintwork.
SKS Raceblade Pro XL Mudguard SetKeep yourself protected from dirt, mud and spray when tackling tough terrains, thanks to the RaceBlade Pro XL Mudguard Set from SKS. This clip-on mudguard set fits tyre widths of 25mm to 32mm. These mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Its superlight extra-long mud flaps give additional spray protection. Its double hinged quick release fitting system also fits aero forks and is compatible with disc brakes (please be mindful of the brake cables/hoses), direct mount brakes and thru axles. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Paintwork protection film for the frame is also included.Features:Fork Compatibility: Aero forks and is also compatible with disc brakes, direct mount brakes and thru axlesWheel Size: 28" (700c)Tyre Width: 25-32mmLength of Front Fender: 565mmLength of Rear Fender: 730mmWeight: 365gBuy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The SKS Raceblade Pro XL mudguards are ideal for touring, commuting and cross bikes as they are made to fit wider tyres. Constructed from lightweight chromoplastic they offer optimal spray protection with a snug fit close to the wheel. The quick and practical tool free mounting means you can fit/remove them in seconds which is great if the weather suddenly changes before a ride. There is always a trade off with mudguards; you don't want to get filthy, but mudguards would take away the look of your bike. Luckily thanks to the high quality aerodynamic design of the Raceblade Pro XL you can stay protected from the elements and rest assured that your bike will look just as good with them as it does without them.
One thing is for sure that during the winter months you will no doubt need to replace various bike parts due to wear and tear from the weather. One of the best ways to prevent this from happening is with a good pair of mudguards. This Topeak Defender set includes the XC1 front fender and XC11 rear fender to help keep you and your bike protected from the elements. The XC1 is a mono inspired front fender that attaches to the suspension fork lowers for a closer fit to the tyre. A special safety feature allows the fender to disengage if a large obstruction enters the wheel. The XC11 is a lightweight rear fender that provides excellent protection from mud and spray. Multiple pivots allow easy fender angle adjustment for a perfect fit while the quick release clamp adjusts to fit 25.4mm - 34.9mm seat posts. Suitable for 26 inch wheels.
The new RoadRacer MK 3 Mudguard Set are the perfect accessory to get you through the winter months and typical wet UK weather. They can now accommodate tyres up to 38c and they fit most 700c bikes including disc and caliper brakes.Road Racer MK3 fits almost any brand of road bike with tyres up to 700x38cSuper Strong Duotec Interlock fixing system for trouble free attachment to your bike, no tools needed!Suits all brake systems - discs and cantisDoes not require mudguard eyelets to be present on your framePerfect for all road, gravel and trekking bikesThese mudguards will fit most road, gravel and trekking bikes, disc brake or caliper and use a strong duotec interlock fixing system for trouble free easy installation. Best of all is that you don t need any tools to install these mudguards. Finally, these mudguards don t require your bikes frame to have eyelets.
The best solution in the case of all eventualities: the SKS mudguard made of high-performance impact-resistant plastic in a black, matt-gloss design is integrated on the rear wheel in such a way that the frame and wheel form a single unit. The very long mudguard perfectly deflects dirt and spray water. Another advantage: the MUDROCKER is also suitable for full suspension bikes and mountain bikes with a Vario seat post. It is mounted on the seat bars of the rear fork with rubberised hook and loop fasteners. The soft, wedge-shaped pad in the mounting brackets protects the frame, can be rotated and used in two different positions for height adjustment. Like this, the distance to the tyre can be perfectly adjusted. Another type of protection is provided by the extender which can optionally be inserted and slid towards the seat bar. It can be specifically adapted using scissors and provides protection against dirt in the bottom bracket area and on the derailleur. In addition, a further extension provides even more protection against splashing water. If necessary, it can be easily attached to the lower rear end of the mudguard. Hook and loop fasteners and a frame protection film are included.Product is for Rear mudguard only
Key Features:Weight: 265g / 275g,Wheel size: 26", 27,5" (650b) " / 29 " ,Max tyre width: 3.0",Length rear fender: 550mm / 620 mm.
ProGuard BOLT-ON is the first large direct-mount mudguard of its type. It offers outstanding protection from mud and spray, and provides a slick factory look thanks to not requiring zip ties or velcro straps to secure it in place.Key Features: 2 sizes: Standard offers high levels of protection. Mini is ideal for all year round offering good protection that’s more discreet, Easy to install or remove with no zip ties or velcro straps, Height adjustability by 6mm and angle adjustability for better fit if needed via 2 tilt brackets supplied, 2 Thick rubber pads on the sides protect your forks, Matte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protection, Long front to protect from high speed mud and spray, Smaller turn down at front for better tyre clearance and to reduce mud blockages, Long rear with flick design offers more protection especially during cornering, Seal Shield increases protection and extends fork service intervals, Made with RRP’s unique polypropylene mix which gives great flexibility, durability and strength, Standard: 130g, Mini: 104g,.Designed for the forks listed below that have a threaded hole in the rear of the fork brace: FOX 32, 34, 36, 49 - Std & Boost (not FOX 40 in 26” or 27.5” without adapter bracket), New Marzocchi forks (using the FOX chassis), Ohlins forks, SR Suntour (models with unthreaded straight through hole in the fork brace require a Sleeve Pack to mount ProGuard BOLT-ON (sold separately), Designed, manufactured and packed in the UK.
The Bluemels mudguard set comes in two colours (silver & black). Matt black and reflective versions are also availableKey Features:45mm or 35mm wide with fixed bridges,3mm stainless steel stays,Front angle, sliding bridges and fixed bridges made from stainless steel,Security fastening ASR joint, angle adjustable Wheel Size: 28 (700c).
SKS Mudrocker Rear MudguardThe SKS Mudrocker Rear is the ideal rear fender for enduro racing and all mountain rides. It features a long, wide and durable design that's adjustable to suit most suspension travel and linkage types. This rear mudguard is designed to ensure your face is protected from spray, mud and grit from the trail. And it's durable and dependable construction is lightweight and compatible with multiple wheel and tyre sizes.Durable, Protective and High-Performance Mountain Bike MudguardThe best solution in the case of all eventualities: the SKS mudguard is made of high-performance impact-resistant plastic with its design that attaches securely to the frame's rear seat stays. This very long mudguard perfectly deflects dirt, spray and grit when riding across even the most demanding terrains. And it's also suitable for full suspension bikes and mountain bikes with a Vario seat post. Secure and Adjustable Rear ProtectionThis rear mudguard is mounted onto frame seat stays using rubberised hook and loop fasteners. It features a soft, wedge-shaped pad in the mounting brackets that protects the frame while also enabling it to be rotated and used in two different positions for height adjustment. This also gives you greater tyre clearance adjustment for different tyre sizes.Protects Against Mud, Water Spray and GritAt the front of the mudguard, the SKS Mudrocker Rear Mudguard features an extender that provides additional protection for your bike's bottom bracket and front derailleur. Plus, it can be specifically adapted using scissors to get the perfect fit. In addition, a further extension provides even more protection against splashing water. If necessary, it can be easily attached to the lower rear end of the mudguard.Please Note: Hook and loop fasteners and a frame protection film are included.Features: Material: Plastic Weight: 240g Length: 840mm Wheel Size: 27.5" (650b), 28", 29" Tyre Width in Inches: 2.2 - 3.0" Tyre Width in Millimetres: 59- 76mm Manufacturers Part Number: 11670Buy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Splashproof your Attain Disc. Our lightweight, synthetic mudguard won't scratch your frame, will keep spray and mud away from the rider and is adjustable to suit any wheel up to 28mm width.Special design for all CUBE Attain Disc models,Lightweight synthetic mudguard,Rubber prevents damage to the frame,Adjustable for wheels (>28 mm width).
The best solution in the case of all eventualities: the SKS mudguard is made of high-performance impact-resistant plastic with a design that attaches securely to the frame's rear seat stays. This very long mudguard perfectly deflects dirt, spray and grit when riding across even the most demanding terrains. And it's also suitable for full suspension bikes and mountain bikes with a Vario seat post. Secure and Adjustable Rear Protection This rear mudguard is mounted onto frame seat stays using rubberised hook and loop fasteners. It features a soft, wedge-shaped pad in the mounting brackets that protects the frame while also enabling it to be rotated and used in two different positions for height adjustment. This also gives you greater tyre clearance adjustment for different tyre sizes. Protects Against Mud, Water Spray and Grit At the front of the mudguard, the SKS Mudrocker Rear Mudguard features an extender that provides additional protection for your bike's bottom bracket and front derailleur. Plus, it can be specifically adapted using scissors to get the perfect fit. In addition, a further extension provides even more protection against splashing water. If necessary, it can be easily attached to the lower rear end of the mudguard. Please Note: Hook and loop fasteners and a frame protection film are included.