Born in the lab and raised between the tapes, Peaty's Link Lube is a minty fresh, triple distilled, ultra high speed chain oil for use in all conditions. Our unique formula penetrates and cleans deep inside your chain, driving out moisture, grit and grime and replacing them with unique blend of oils and waxes (Peaty's secret sauce) to lubricate and protect. Yes, you read that correctly! Peaty's Link Lube actually cleans your chain as you use it!Application:1. Always fully degrease your drivetrain before applying fresh lube. For best results, use Peaty's Drivetrain Degreaser.2. Ensure you thoroughly wash your chain with clean water after degreasing (degreaser is designed to eat chain oil after all).3. Remove as much water as you can from the chain - a quick wipe with a clean cloth will do fine.4. Give the bottle a good shake to evenly distribute the secret sauce.5. Apply the lube while cycling the chain backwards (eBikes will need to be pedalled forwards in a stand) ensuring every link is adequately covered.6. Keep cycling the chain for 10seconds or so to help the lube work its way into your chain.7. Thoroughly wipe away all excess lube from your chain using a clean cloth (excess oil on the outside of the chain will attract dust in dry conditions).Tips:1. For wet weather conditions, leave a small amount of lube on the outside of the chain for longer-lasting protection.2. On first use with pre-used chains, you may find that your chain turns black - this is the LinkLube driving out grime from deep in your chain. Just keep riding, degreasing, lubing and repeating until your chain runs shiny clean once more! Caution - Do not get LinkLube (or any lube for that matter!) on your brakes or brake pads.
The OH-2400 FlexTight Brass Bell is a tool free mount attaches quickly to handlebars 19-32 mm. Solid brass 22mm diameter bell can also be mounted with a light or computer FlexTight bracket. Available in black, gold or silver.Colour: Black / Silver / GoldSound Volume: 83.5dBHandlebar size: 22-32mmBell Diameter: 23mmWeight: 23g
The OH-2400 FlexTight Brass Bell is a tool free mount attaches quickly to handlebars 19-32 mm. Solid brass 22mm diameter bell can also be mounted with a light or computer FlexTight bracket. Available in black, gold or silver.Colour: Black / Silver / GoldSound Volume: 83.5dBHandlebar size: 22-32mmBell Diameter: 23mmWeight: 23g
The OH-2400 FlexTight Brass Bell is a tool free mount attaches quickly to handlebars 19-32 mm. Solid brass 22mm diameter bell can also be mounted with a light or computer FlexTight bracket. Available in black, gold or silver.Colour: Black / Silver / GoldSound Volume: 83.5dBHandlebar size: 22-32mmBell Diameter: 23mmWeight: 23g
Ideal for those looking for the maximum cleanliness and suitable for use in all weathers. Finish Line Krytech Lubricant uses DuPont's most advanced lubrication technology (Krytrox) which bonds to metal components. The wax will dry onto the chain and then shed slowly whilst in use, taking grime with it, giving excellent lubrication for extended periods. Suitable for use on chains, cables, pedals and derailleurs.Advanced all weather wax lubricantContains DuPont's most advanced lubrication technologyRemoves grime build upNon abrasive and long lastingSuitable for chains, cables, pedals and derailleurs
The original sealant from Orange Seal. Instantly seals puncture s up to 6mm and slices up to 19mm long. Lasts up to 45 days between top-ups and performs down to -11 degrees Celsius.Seals punctures upto 6mmSeals slices upto 19mmSeals tyres with porous sidewallsWorks down to -11°cLast on average 30-45 days between top upsNo corrosive formulaAlso great for inner tubesAvailable with applicator injector or as a refill bottleHow much sealant do you need Road tyres: 1-2oz per tyreMTB 26": 3oz per tyreMTB 27.5": 3oz per tyreMTB 29": 4oz per tyreFat Bike: 6-8oz per tyre
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturer's entry level bearing.These standard ABEC 3/5 bearings are designed for use within bottom brackets or hubs and give outstanding performance and longevity to your components.
Fabric Lite Lock-On GripsThese lock-on grips are designed for MTB use as they give you a comfortable and reliable surface to hold on to as you shred the mountain bike trails. They feature a dependable rubber construction with a hidden aluminium clamp, which means you can enjoy maximum grip with or without gloves. One final highlight is they weigh only 76g, so you won't have to worry about adding any excess weight to your mountain bike.Features: Grip Material: Kraton Rubber Clamp Material: Aluminium Use: MTB Grip Type: Comfort Diameter: 29mm Length: 135mm Single or Pair: Pair Weight: 76g (approx)Buy Fabric Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Slimmed down bmx brake pads from Odyssey. Available in black for regular chrome or anodized rims and clear for painted rims.
Key Features:Nexus series chain1/2 x 1/8 inch sizeAnti-corrosion treatment for longer service lifeSilver finish114 links.
BikeShield keeps your bike in mint condition by protecting it from scratches, grit and stones. The Stay Shield is a 1-piece protection for chain stays against scratches from chain slap. It offers clear advantages over other products which aim to provide invisible protection for bike frames. ON the bike it is invisible. Peel it off and the frames is like-new! Ultra-tough protectionSelf-healing when cutEasy to apply or remove by handLeaves no sticky residueInvisible on the bikeWill not yellow with ageLong lastingIncludes:1 piece (25x3.8cm)
The EVOC Bite Valve is the mouthpiece for the drinking tube of your EVOC hydration bladder.Self-closing silicone stream ValveLeak-tight seal against escaping liquidTaste-neutral material for pure flavour