The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chainring set up, without a front derailleur.V2 Upgrade:Material: AL7075-T651 ,Bar mounted shifter style remote lever,Cable operated ,Cable Length: 1.5m ,Finish: Sandblasted and hard anodized black ,2 Year Warranty.V2 I-Spec Upgrade:Material: AL7075-T651 ,Shimano I-Spec mount shifter style remote lever ,Cable operated ,Cable Length: 1.5m ,Finish: Sandblasted and hard anodized black ,2 Year Warranty.
The Brand-X carbon inline seatpost is manufactured from a lightweight forged 6061-T6 Aluminium head and clamp which is bonded to a lightweight UD carbon shaft. The head features a micro adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily. Key Features: Finish: Smooth lacquer,Incremental height markings,EN-M Approved,Offset: 22mm,Material: UD Carbon Fibre shaft and 6061-T6 Aluminium head,Length: 350mm,Weight: 265 grams (31.6mm).
Brand-X 12 Speed MTB CassettePerfectly suited for the rigours of modern mountain bike (MTB) riding, this 12 speed cassette is equipped with high tensile steel cogs on a 7075 alloy spider for maximum strength and durability. Brand-X has also kitted out this trail-ready model with a standard Shimano HG spline and a tooth profile that has also been optimised to aid gear changes and reduce noise. Available in both 11-50t and 11-52t options depending on your ratio requirement, this is a great choice of upgrade for replacing your old 12 speed MTB cassette and benefitting from smooth and consistent performance.The 11-50 cassette option is fully compatible with SRAM and Shimano, while the 11-52t cassette option is compatible with SRAM drivetrains.Features: Material: High Tensile Steel cogs on a 7075 Alloy Spider Use: Mountain bike (MTB) Ratio: 50T Option: 11-13-15-17-19-21-24-28-32-36-42-50; 52T Option: 11-13-15-18-21-24-28-32-36-40-46-52 Freehub Compatibility: Shimano HG freehubs Chain Compatibility: 12 Speed chainsBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X 12 Speed MTB CassettePerfectly suited for the rigours of modern mountain bike (MTB) riding, this 12 speed cassette is equipped with high tensile steel cogs on a 7075 alloy spider for maximum strength and durability. Brand-X has also kitted out this trail-ready model with a standard Shimano HG spline and a tooth profile that has also been optimised to aid gear changes and reduce noise. Available in both 11-50t and 11-52t options depending on your ratio requirement, this is a great choice of upgrade for replacing your old 12 speed MTB cassette and benefitting from smooth and consistent performance.The 11-50 cassette option is fully compatible with SRAM and Shimano, while the 11-52t cassette option is compatible with SRAM drivetrains.Features: Material: High Tensile Steel cogs on a 7075 Alloy Spider Use: Mountain bike (MTB) Ratio: 50T Option: 11-13-15-17-19-21-24-28-32-36-42-50; 52T Option: 11-13-15-18-21-24-28-32-36-40-46-52 Freehub Compatibility: Shimano HG freehubs Chain Compatibility: 12 Speed chainsBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Brand-X 12 speed MTB cassette is the perfect replacement for your 12 speed cassette. Available in both 11-50t and 11-52t options depending on your ratio requirement. The cassette uses a standard Shimano HG spline and its high tensile steel cogs are mounted on a 7075 alloy spider for maximum durability while keeping weight to a minimum. The tooth profile has also been optimised to aid gear changes and reduce noise. The 11-50 cassette option is fully compatible with SRAM and Shimano, while the 11-52t cassette option is compatible with SRAM drivetrains.
The Brand-X 11 speed MTB cassette is the perfect replacement for your 11 speed cassette. Available in both 11-42t and 11-46t options depending on your ratio requirement. The cassette uses a standard Shimano HG spline and its high tensile steel cogs are mounted on a 7075 alloy spider for maximum durability while keeping weight to a minimum. The tooth profile is also optimised to aid gear changes and reduce noise.
Brand-X 11 Speed MTB CassetteBenefitting from high tensile steel cogs on a 7075 alloy spider, this versatile cassette offers an excellent balance of stiffness and reliability without adding any excess grams to your mountain bike (MTB) or touring bike. Brand-X has also kitted out this model with a standard Shimano HG spline and a tooth profile that's optimised to aid gear changes and reduce noise. As a result, it's a great choice of upgrade for replacing your old 11 speed cassette and enjoying smooth performance wherever your ride takes you.Features: Material: High Tensile Steel cogs on a 7075 Alloy Spider Use: Mountain bike (MTB), Touring bike Ratio: 42T Option: 11-13-15-17-19-21-24-28-32-36-42; 46T Option: 11-13-15-18-21-24-28-32-36-40-46 Freehub Compatibility: Shimano type 9-11 speed freehubs Chain Compatibility: All 11 speed chains Weight: 42T Option: 453g; 46 Option: 560gBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X 11 Speed MTB CassetteBenefitting from high tensile steel cogs on a 7075 alloy spider, this versatile cassette offers an excellent balance of stiffness and reliability without adding any excess grams to your mountain bike (MTB) or touring bike. Brand-X has also kitted out this model with a standard Shimano HG spline and a tooth profile that's optimised to aid gear changes and reduce noise. As a result, it's a great choice of upgrade for replacing your old 11 speed cassette and enjoying smooth performance wherever your ride takes you.Features: Material: High Tensile Steel cogs on a 7075 Alloy Spider Use: Mountain bike (MTB), Touring bike Ratio: 42T Option: 11-13-15-17-19-21-24-28-32-36-42; 46T Option: 11-13-15-18-21-24-28-32-36-40-46 Freehub Compatibility: Shimano type 9-11 speed freehubs Chain Compatibility: All 11 speed chains Weight: 42T Option: 453g; 46 Option: 560gBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Ascend II Dropper Seatpost (105,125,150)Available in 105mm, 125m and 150mm travel options, the Ascend II mountain bike dropper enables you to quickly and reliably adjust your saddle height without interrupting your pedalling flow. Offering smooth and consistent operation, this budget-friendly component will put you in the perfect riding position for tackling every section of the trail.Externally Routed Dropper SeatpostBuilding on the success of the Ascend Dropper Seatpost, this aluminium dropper post is available for those who have a rig without internal cable routing: Brand-X is bringing affordable and reliable dropper posts to the people! With infinitely smooth adjustments and an ergonomic lever that can sit on the left or right of your cockpit, the Brand-X Ascend II Dropper Seatpost is the upgrade that your bike needs. To avoid cable movement/pull, this dropper seatpost's cable is actuated from the mid-cap and delivers consistent performance.Please Note: The 27.2mm option comes with the 2/3x Paddle Lever. The 27.2mm size also has a 2-piece saddle clamp so the saddle will sit slightly higher than on the 31.6mm and 30.9mm options.Features: Material: T6-6061 Aluminium Compatibility: Frames that do not have internal dropper post cable routing Bar mounted remote lever and cable operated external routing (included) Linkage mechanism eliminates any outer cable pull Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism Length: 390mm, 400mm, or 449mm Travel: 105mm, 125mm or 150mm Cable Length: 1.5m Finish: Sand blasted and hard anodised Warranty: 2 years Not suitable for internal routing use Lever Clamp Diameter: 22.2mm Rider Weight: Min: 50-55kg; Max: 120kg Weight: 605g (30.9mm) without cable and paddle shifter (90g)Minimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 27.2mm x 390mm 105mm 90 128 31.6mm x 400mm 125mm 90 128 30.9mm x 400mm 125mm 90 128 31.6mm x 449mm 150mm 90 128 30.9mm x 449mm 150mm 90 128 Service Guide Information:Click here to view the Brand-X Ascend II 105, 125 External Route Dropper Post Service Guide.Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide.Manufacturer Reference Codes: 125mm/31.6mm/400mm: BRNDXDRPA02316400125; 125mm/30.9mm/400mm: BRNDXDRPA02309400125; 105mm/27.2mm/390mm: BRNDXDRPA02272390105; 150mm/31.6mm/449mm: BRNDXDRPA02316449150; 150mm/30.9mm/449mm: BRNDXDRPA02309449150Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Brand-X EH1 Enduro Helmet is styled for Enduro riding and forms part of the Brand-X Helmets range. A clean in-mold design with discreet graphics, keeping you safe on the trails and offering the quality of market leading brands at a sensible price.The Brand-X EH1 Enduro Helmet has been designed and developed by riders wanting to maximise comfort, style and safety.The in-mould construction in combination with our lightweight shell and EPS inner has allowed us to save weight and add ventilation where you need it most, maximising comfort on any ride.The low rear profiling provides additional rear protection and the low-slung retention system grips the helmet firmly to your head and is fully adjustable to guarantee the perfect fit.The visor is height adjustable and is loosened off and moved with a bolt either side.Sealed anti-bacterial padding that is both removable and washable provides additional comfort and keeps things clean for future rides.Key Features:CE/ EN1078 certified,Sizes: S/M: 55-59cm, M/L: 59-63cm,Weight: 327g (S/M),In Mold construction,17 vents,Adjustable retention system & straps,Sealed anti-bacterial padding- removable and washable,Discreet reflective graphics,Recyclable Packaging.
Building on the success of the original Ascend, Brand- X now offer an externally routed cable-operated option with the Ascend II. The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing. It comes with an ergonomic lever that can be left or right hand mounted depending on your preference. The cable is actuated from the mid cap ensuring zero cable movement. The Ascend Dropper mechanical cable-operated seatpost sets new standards for reliability and performance at a fantastic price point. Please Note: The 27.2 option comes with the 2/3x Paddle Lever. The 27.2mm size also has a 2-piece saddle clamp so the saddle will sit slightly higher than on the 31.6 and 30.9mm options. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 27.2mm x 390mm 105mm 90 128 31.6mm x 400mm 125mm 90 128 30.9mm x 400mm 125mm 90 128 31.6mm x 449mm 150mm 90 128 30.9mm x 449mm 150mm 90 128 Service Guide Information Click here to view the Brand-X Ascend II 105, 125 External Route Dropper Post Service Guide. Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide.
The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Now available in both a 125mm and 150mm travel options, it allows riders to infinitely adjust their saddle height to suit the terrain ahead. Ergonomic Shifter-Style Dropper Remote The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that this dropper is ideally suited for those using a 1x chainring set up; without a front derailleur. However, a paddle style shifter is available separately for those who want to use the Ascend with a front derailleur and shifter. For installation, the seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again. Please Note: This Ascend Seatpost is only compatible with bikes that can use an internally routed dropper. (Please note that it cannot be converted to external cable actuated - for externally routed bikes, please see the Ascend II 105/125mm/150mm travel version). Remotes supplied are suitable for MTB flat bars with a 22.2mm diameter. 1x fits in place of the front shifter on left side and 2x fits perpendicular to the bar beside the grip on either side. For CX bikes that need a 31.8mm bar, this can be found here. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 357mm 100mm 90 124 30.9mm x 357mm 100mm 90 124 31.6mm x 412mm 125mm 90 124 30.9mm x 412mm 125mm 90 124 31.6mm x 459mm 150mm 90 124 30.9mm x 459mm 150mm 90 124 Service Guide Information Click here to view the Brand-X Internal Dropper Post 100,125 Service Guide. Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide. Installation Guide Information Click here to view the Brand-X Ascend Internal Route Post Installation Guide.
Brand-X Ascend Dropper Seatpost (100, 125 & 150)Precisely engineered to bring you fast and smooth operation on the trails, the Ascend dropper post will get you into the optimum riding position in a flash. This means you'll be primed for the upcoming terrain so you can attack a climb or descent without having to stop to change your saddle position. Designed for MTB frames with dropper post internal routing, it will give a clean look to your bike too.Ergonomic Dropper SeatpostThis mountain bike dropper seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. It's ideally suited for those running a 1x chainring transmission without a front derailleur.Your bike's frame must have internal dropper post routing for seamless compatibility with this dropper seatpost. To eliminate cable movement/pull, the smooth operating Brand-X Ascend 120mm & 150mm MTB Dropper Seatpost has been cable actuated at the end of the seatpost to deliver consistent performance.Remotes supplied are suitable for MTB flat bars with a 22.2mm diameter. 1x fits in place of the front shifter on left side and 2x fits perpendicular to the bar beside the grip on either side. For CX bikes that need a 31.8mm bar, this can be found here.Reasons to Buy: Incredibly fast and smooth operation. Gives you an optimum riding position. Internal cable routing for a clean look. Effortlessly remote operated.Features: Material: AL7075-T651 Diameter: 30.9mm or 31.6mm Size: 410mm or 480mm Length/Travel: 100mm, 120mm or 150mm Cable Length: 1.5m Finish: Sand Blasted and Hard Anodised Black Warranty: 2 Years Compatibility: Frames with dropper post internal cable routing only Remote Included: Yes, bar mounted shifter style remote lever Infinitely adjustable Cable operated Internal routing only Linkage mechanism eliminates any outer cable pull Zero Offset Head type One Piece head/Upper Shaft Micro Adjust clamping mechanism Rider Weight: Min: 50-55kg; Max: 120kg Weight: 550g (without cable and shifter, 31.6mm)Please Note: The "Size" information relates to the seatpost's overall length. To know which size to buy, measure your current seatpost's length and diameterMinimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 357mm 100mm 90 124 30.9mm x 357mm 100mm 90 124 31.6mm x 412mm 125mm 90 124 30.9mm x 412mm 125mm 90 124 31.6mm x 459mm 150mm 90 124 30.9mm x 459mm 150mm 90 124 Service Guide Information:Click here to view the Brand-X Internal Dropper Post 100, 125 Service Guide.Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Installation Guide Information:Click here to view the Brand-X Ascend Internal Route Post Installation Guide.Manufacturer's Reference Codes: 120mm 31.6mm 410mm: BRNDXDRP01412316120; 120mm 30.9mm 410mm: BRNDXDRP01412309120; 150mm 31.6mm 480mm: BRNDXDRP01480316150; 150mm 30.9mm 480mm: BRNDXDRP01480309150; 125mm 30.9mm 412mm: BRNDXDRP0123412309125; 150mm 30.9mm 459mm: BRNDXDRP0123459309150; 125mm 31.6mm 412mm: BRNDXDRP0123412316125; 150mm 31.6mm 459mm: BRNDXDRP0123459316150Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Ascend MTB Dropper Replacement CartridgeAvailable in both internally and externally routed options, this replacement cartridge is perfect for helping you repair and maintain your Brand-X Ascend dropper seat post. Each cartridge is unique to each travel option and cartridges are not cross-compatible, so it is important to ensure that you marry up the correct cartridge to the routing and the travel of your Brand-X Ascend post.Service Guide Information:Click here to view the Brand-X Ascend II 105, 125 External Route Dropper Post Service Guide.Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide.Click here to view the Brand-X Internal Dropper Post 100, 125 Service Guide.Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Features: Compatibility: Brand-X Ascend dropper seat post Genuine Brand-X spare partsBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Brand-X Carbon ergo road racing bar is a compact bar that is designed from the ground up with ergonomics and comfort in mind featuring a compact ergo bend with a short 80mm reach and shallow 125mm drop. The UD Carbon construction features a textured finish in the stem and control clamping areas. The top section features an ovalized profile for increased comfort. Additional features include recessed channels for cable routing and centre markings for ease of set up.
Brand-X Carbon Ergo Racing Road HandlebarDesigned to offer the ultimate in comfort and ergonomics, this racing road handlebar from Brand-X is ready to tackle whatever the trail throws at you. Featuring an 80mm reach and shallow 125mm drop, this handlebar is compact and has an ergonomic bend for ease of use. The UD Carbon construction features a textured finish in the stem and control clamping areas. The top section features an ovalized profile for increased comfort. Additional features include recessed channels for cable routing and centre markings for ease of set up.Features:Compact ergo Bend: 80mm reach/125mm dropClamp Diameter: 31.8mmBacksweep: 3 degreeMaterial: UD CarbonFinish: Gloss lacquer top coatGraphics: Subtle water decals and centre markings.EN-R ApprovedColour: UD CarbonWeight: 228 grams (42cm)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The handlebar is hand built using high modulus graphite fibre, combining both UD and 3K weave to balance weight with robust construction. Each handlebar is rigoursly tested and is cerfied to ISO 4210-2 Available in 3 risers - 12mm, 25mm and 38mm and two widths- 780mm and 800mm, depending on your riding style and preference, all in 31.8mm clamp. Particle paint on the bar ends and clamp areas provides additional friction and prevents slip Graphics are subtle and finishing is a matte black
Brand-X Carbon Riser BarThis riser bar features a handcrafted carbon construction and a rigorously tested design, which gives you exceptional off-road steering performance at an affordable price. Hand built using high modulus graphite carbon fibre, this model combines both Uni-Directional (UD) and 3K weave to deliver a superior strength to weight ratio on the toughest rides. Brand-X has also used particle paint on the bar ends and clamp areas, which provides additional friction while also preventing slip.Each handlebar is rigorously tested and is certified to ISO 4210-2.Available in 3 risers - 12mm, 25mm and 38mm and two widths- 780mm and 800mm, depending on your riding style and preference, all in 31.8mm clamp.Features:Material: CarbonFinish: Subtle graphics with a matte black finishBacksweep: 9 degreeUpsweep: 6 degreeUse: Trail, All Mountain, Enduro, Downhill and FreerideWeight: 240g (780mm, 25mm), 242g (800mm, 25mm)2 Year Manufacturer WarrantyBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Carbon Ergo Racing Road HandlebarDesigned to offer the ultimate in comfort and ergonomics, this racing road handlebar from Brand-X is ready to tackle whatever the trail throws at you. Featuring an 80mm reach and shallow 125mm drop, this handlebar is compact and has an ergonomic bend for ease of use. The UD Carbon construction features a textured finish in the stem and control clamping areas. The top section features an ovalized profile for increased comfort. Additional features include recessed channels for cable routing and centre markings for ease of set up.Features:Compact ergo Bend: 80mm reach/125mm dropClamp Diameter: 31.8mmBacksweep: 3 degreeMaterial: UD CarbonFinish: Gloss lacquer top coatGraphics: Subtle water decals and centre markings.EN-R ApprovedColour: UD CarbonWeight: 228 grams (42cm)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Building on the success of the original Ascend, Brand- X now offer a long drop externally routed option with the Ascend II XL. The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing. The post comes with an ergonomic 1X lever. The cable is actuated from the mid cap ensuring zero cable movement. For those wishing to run a 2X set up, a right hand mount 'paddle' lever is available here: https://www.wiggle.co.uk/brand-x-ascend-lever-kit The Ascend Dropper seatpost set new standards for reliability and performance at a fantastic price point. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 489mm 170mm 100 138 30.9mm x 489mm 170mm 100 138 Service Guide Information Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide.