This kid's dropper seat post features a 27.2" diameter as well as 70mm of travel, so your little rider can get the same performance as you would normally expect on an adult's bike. Brand-X has also designed this kid's specific model to drop under a lower weight load, so they can enjoy the identical benefits of a dropper seat, while out on the trail. Ideally suited for riders aged six to twelve years old, this seatpost will drop under a 20kg load and Brand-X suggests a max load of 40kg. It is internally cable routed and comes with a 1x shifter for left-hand bar mount. This allows it to deliver the same reliability and peace of mind that comes as standard with all Brand-X dropper posts. The minimum insertion length is 80mm (including the actuator – this is 114mm of post). The total post length is 315mm. Installation Guide Information Click here to view the Brand-X Ascend Internal Route Post Installation Guide.
Brand-X Ascend Dropper Seatpost (100, 125 & 150)Precisely engineered to bring you fast and smooth operation on the trails, the Ascend dropper post will get you into the optimum riding position in a flash. This means you'll be primed for the upcoming terrain so you can attack a climb or descent without having to stop to change your saddle position. Designed for MTB frames with dropper post internal routing, it will give a clean look to your bike too.Ergonomic Dropper SeatpostThis mountain bike dropper seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. It's ideally suited for those running a 1x chainring transmission without a front derailleur.Your bike's frame must have internal dropper post routing for seamless compatibility with this dropper seatpost. To eliminate cable movement/pull, the smooth operating Brand-X Ascend 120mm & 150mm MTB Dropper Seatpost has been cable actuated at the end of the seatpost to deliver consistent performance.Remotes supplied are suitable for MTB flat bars with a 22.2mm diameter. 1x fits in place of the front shifter on left side and 2x fits perpendicular to the bar beside the grip on either side. For CX bikes that need a 31.8mm bar, this can be found here.Reasons to Buy: Incredibly fast and smooth operation. Gives you an optimum riding position. Internal cable routing for a clean look. Effortlessly remote operated.Features: Material: AL7075-T651 Diameter: 30.9mm or 31.6mm Size: 410mm or 480mm Length/Travel: 100mm, 120mm or 150mm Cable Length: 1.5m Finish: Sand Blasted and Hard Anodised Black Warranty: 2 Years Compatibility: Frames with dropper post internal cable routing only Remote Included: Yes, bar mounted shifter style remote lever Infinitely adjustable Cable operated Internal routing only Linkage mechanism eliminates any outer cable pull Zero Offset Head type One Piece head/Upper Shaft Micro Adjust clamping mechanism Rider Weight: Min: 50-55kg; Max: 120kg Weight: 550g (without cable and shifter, 31.6mm)Please Note: The "Size" information relates to the seatpost's overall length. To know which size to buy, measure your current seatpost's length and diameterMinimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 357mm 100mm 90 124 30.9mm x 357mm 100mm 90 124 31.6mm x 412mm 125mm 90 124 30.9mm x 412mm 125mm 90 124 31.6mm x 459mm 150mm 90 124 30.9mm x 459mm 150mm 90 124 Service Guide Information:Click here to view the Brand-X Internal Dropper Post 100, 125 Service Guide.Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Installation Guide Information:Click here to view the Brand-X Ascend Internal Route Post Installation Guide.Manufacturer's Reference Codes: 120mm 31.6mm 410mm: BRNDXDRP01412316120; 120mm 30.9mm 410mm: BRNDXDRP01412309120; 150mm 31.6mm 480mm: BRNDXDRP01480316150; 150mm 30.9mm 480mm: BRNDXDRP01480309150; 125mm 30.9mm 412mm: BRNDXDRP0123412309125; 150mm 30.9mm 459mm: BRNDXDRP0123459309150; 125mm 31.6mm 412mm: BRNDXDRP0123412316125; 150mm 31.6mm 459mm: BRNDXDRP0123459316150Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Ascend Dropper Seatpost (100, 125 & 150)Precisely engineered to bring you fast and smooth operation on the trails, the Ascend dropper post will get you into the optimum riding position in a flash. This means you'll be primed for the upcoming terrain so you can attack a climb or descent without having to stop to change your saddle position. Designed for MTB frames with dropper post internal routing, it will give a clean look to your bike too.Ergonomic Dropper SeatpostThis mountain bike dropper seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. It's ideally suited for those running a 1x chainring transmission without a front derailleur.Your bike's frame must have internal dropper post routing for seamless compatibility with this dropper seatpost. To eliminate cable movement/pull, the smooth operating Brand-X Ascend 120mm & 150mm MTB Dropper Seatpost has been cable actuated at the end of the seatpost to deliver consistent performance.Remotes supplied are suitable for MTB flat bars with a 22.2mm diameter. 1x fits in place of the front shifter on left side and 2x fits perpendicular to the bar beside the grip on either side. For CX bikes that need a 31.8mm bar, this can be found here.Reasons to Buy: Incredibly fast and smooth operation. Gives you an optimum riding position. Internal cable routing for a clean look. Effortlessly remote operated.Features: Material: AL7075-T651 Diameter: 30.9mm or 31.6mm Size: 410mm or 480mm Length/Travel: 100mm, 120mm or 150mm Cable Length: 1.5m Finish: Sand Blasted and Hard Anodised Black Warranty: 2 Years Compatibility: Frames with dropper post internal cable routing only Remote Included: Yes, bar mounted shifter style remote lever Infinitely adjustable Cable operated Internal routing only Linkage mechanism eliminates any outer cable pull Zero Offset Head type One Piece head/Upper Shaft Micro Adjust clamping mechanism Rider Weight: Min: 50-55kg; Max: 120kg Weight: 550g (without cable and shifter, 31.6mm)Please Note: The "Size" information relates to the seatpost's overall length. To know which size to buy, measure your current seatpost's length and diameterMinimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 357mm 100mm 90 124 30.9mm x 357mm 100mm 90 124 31.6mm x 412mm 125mm 90 124 30.9mm x 412mm 125mm 90 124 31.6mm x 459mm 150mm 90 124 30.9mm x 459mm 150mm 90 124 Service Guide Information:Click here to view the Brand-X Internal Dropper Post 100, 125 Service Guide.Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Installation Guide Information:Click here to view the Brand-X Ascend Internal Route Post Installation Guide.Manufacturer's Reference Codes: 120mm 31.6mm 410mm: BRNDXDRP01412316120; 120mm 30.9mm 410mm: BRNDXDRP01412309120; 150mm 31.6mm 480mm: BRNDXDRP01480316150; 150mm 30.9mm 480mm: BRNDXDRP01480309150; 125mm 30.9mm 412mm: BRNDXDRP0123412309125; 150mm 30.9mm 459mm: BRNDXDRP0123459309150; 125mm 31.6mm 412mm: BRNDXDRP0123412316125; 150mm 31.6mm 459mm: BRNDXDRP0123459316150Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Ascend CX Dropper Seatpost (85 & 105mm)As it has been so popular with mountain bikers, Brand-X has now made its Ascend dropper seatpost available for drop bar enthusiasts too. This particular model adopts the smaller 27.2mm diameter as used on road, gravel and CX bikes, plus has a shorter travel range to suit the type of riding that these bikes are for. As long as your frame has dropper post internal cable routing, you can now easily tweak your riding position on the move for increased comfort and pedalling efficiency.Smooth and Reliable Dropper SeatpostOperated easily via a paddle style remote on either side of your cockpit, the aluminium CX Dropper Seatpost is easily installed on bikes with internal cable routing. Cable actuated at the bottom of the dropper post via a linkage mechanism, the Brand-X dropper post eliminates cable pull/movement for a smooth and reliable performance. The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend CX Dropper Seatpost will carry on.Reasons to Buy: Designed for drop bar enthusiasts. 27.2mm diameter for road, gravel and CX use. Shorter travel range. Internal cable routing for a clean look.Features: Material: T651-7075 Aluminium Bar mounted paddle style remote lever and cable operated internal routing (included) Linkage mechanism eliminates any outer cable pull Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism Only compatible with internally routed bikes Seatpost Diameter: 27.2mm Overall Length: 85mm: 350mm; 105mm: 400mm Cable Length: 1.5m Lever Diameter: To fit 31.8mm handlebars Finish: Sand blasted and hard anodised Warranty: 2 years Rider Weight: Min: 50-55kg; Max: 120kg Weight: 530g (85mm travel, w/o cable and paddle)Minimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 27.2mm x 350mm 85mm 100 134 27.2mm x 400mm 105mm 120 154 Manufacturer's Reference Codes: 400mm/105mm/27.2mm: BRNDXDRPCX272400105; 350mm/85mm/27.2mm: BRNDXDRPCX27235085Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Ascend Kids' MTB Dropper Seatpost (70mm)This dropper seatpost is specifically designed for kids who want to feel the benefits of exploring the mountain bike (MTB) trails with a dropper keeping them comfortable and in control. It features a 27.2" diameter as well as 70mm of travel, so your little ripper can get the same performance as you would normally expect on an adult's bike. Brand-X has also designed this kid's specific model to drop under a lower weight load, so your young rider can enjoy the same benefits of a dropper seat, while out on the trail.Ideally suited for riders aged six to twelve years old, this seatpost will drop under a 20kg load and Brand-X suggests a max load of 40kg. It is internally cable routed and comes with a 1x shifter for left hand bar mount. This allows it to deliver the same reliability and peace of mind that comes as standard with all Brand-X dropper posts. Minimum insertion length is 80mm (including the actuator - this is 114mm of post). Total post length is 315mm.Features: Use: Kid's MTB Diameter: 27.2" Travel: 70mm Cable Routing: Internal Minimum Insertion Length: 80mm Minimum Insertion Length Including Actuator: 114mm Total Post Length: 315mm Included: 1x shifter for left hand bar mount Age Group: Ideal for riders aged 6-12 Max Load: 40kgInstallation Guide Information:Click here to view the Brand-X Ascend Internal Route Post Installation Guide.Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X RD-01 Road Frame and Carbon ForkThe Brand-X RD-01 is a solid performer, which combines lightness, durability, adaptability and affordability. Equally at home on long winter training rides or daily commutes to the office, the lightweight 6061-T6 alloy frame has been designed with all year riding and commuting in mind.Carbon ComfortA UD carbon bladed fork with alloy steerer reduces buzz from rough sections of road, for increased rider comfort. There is ample clearance for mudguards and features eyelets for ease of fitment on the frame and it also features rear pannier rack mounts, which broaden the RD-01's capabilities as an all-rounder for commuting and social riding.Comfortable GeometryComfortable geometry offers a more relaxed riding position, which translates into increased comfort and reduced rider fatigue, a feature that we have come to appreciate ourselves when making early morning commutes when carrying a bag on our backs.Please Note: The Brand-X RD-01 Road Bike Frameset requires a long reach brake caliper (47mm - 59mm). Shimano R650, Shimano R451, Tektro R317 and Tektro R359 calipers are all fully compatible and recommended for use with this frame.Features: Frame: Mechanically Formed Triple Butted 6061-T6 Aluminium Frame Fork: UD Carbon Bladed Fork with Alloy Steerer Frame Certification: ISO 4210 Brake Compatibility: Long reach 47mm - 59mm calipers Recommended Brake Calipers: Shimano R650/R451 or Tektro R317/R359 Headtube: IS41/28.6 | IS41/30 Seatpost: 31.6mm Seat Clamp: 34.9mm Bottom Bracket: 68mm BSA Tyre Size (Recommended): 25C Wheels: 700c Warranty: 2 Years Weight: 1.69kg (56cm frame)Buy Brand-X Frames and Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X RD-01 Road Frame and Carbon ForkThe Brand-X RD-01 is a solid performer, which combines lightness, durability, adaptability and affordability. Equally at home on long winter training rides or daily commutes to the office, the lightweight 6061-T6 alloy frame has been designed with all year riding and commuting in mind.Carbon ComfortA UD carbon bladed fork with alloy steerer reduces buzz from rough sections of road, for increased rider comfort. There is ample clearance for mudguards and features eyelets for ease of fitment on the frame and it also features rear pannier rack mounts, which broaden the RD-01's capabilities as an all-rounder for commuting and social riding.Comfortable GeometryComfortable geometry offers a more relaxed riding position, which translates into increased comfort and reduced rider fatigue, a feature that we have come to appreciate ourselves when making early morning commutes when carrying a bag on our backs.Please Note: The Brand-X RD-01 Road Bike Frameset requires a long reach brake caliper (47mm - 59mm). Shimano R650, Shimano R451, Tektro R317 and Tektro R359 calipers are all fully compatible and recommended for use with this frame.Features: Frame: Mechanically Formed Triple Butted 6061-T6 Aluminium Frame Fork: UD Carbon Bladed Fork with Alloy Steerer Frame Certification: ISO 4210 Brake Compatibility: Long reach 47mm - 59mm calipers Recommended Brake Calipers: Shimano R650/R451 or Tektro R317/R359 Headtube: IS41/28.6 | IS41/30 Seatpost: 31.6mm Seat Clamp: 34.9mm Bottom Bracket: 68mm BSA Tyre Size (Recommended): 25C Wheels: 700c Warranty: 2 Years Weight: 1.69kg (56cm frame)Buy Brand-X Frames and Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Ascend Seatpost is only compatible with bikes that can use an internally routed dropper. (Please note that it cannot be converted to external cable actuated.)The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter.The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point.Key Features:Bar mounted shifter style remote lever,Infinitely adjustable,Cable operated,Internal routing only,Linkage mechanism eliminates any outer cable pull,Zero Offset Head type,One Piece head/Upper Shaft,Micro Adjust clamping mechanism,30.9mm or 31.6mm Diameter,410mm Length,120mm Travel,Cable Length: 1.5m,Sand Blasted and Hard Anodised Black,2 Year Warranty,550g W/O Cable and Shifter (31.6mm).
The Brand-X Ascend II is an externally routed dropper seatpost that offers excellent performance and reliability without breaking the bank. Tweak your saddle height for what lies ahead and tackle the trail in comfort.Externally Routed Dropper SeatpostBuilding on the success of the Ascend Dropper Seatpost, this aluminium dropper post is available for those who have a rig without internal cable routing: Brand-X is bringing affordable and reliable dropper posts to the people! With infinitely smooth adjustments and an ergonomic paddle style lever that can sit on the left or right of your cockpit, the Brand-X Ascend II Dropper Seatpost is the upgrade that your bike needs. To avoid cable movement/pull, this dropper seatpost's cable is actuated from the mid-cap and delivers consistent performance.Key Features:Material: T6-6061 Aluminium,Bar mounted paddle style remote lever and cable operated external routing,Linkage mechanism eliminates any outer cable pull,Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism,Length: 400mm,Travel: 125mm (27.2mm = 105mm travel),Cable Length: 1.5m,Finish: Sand blasted and hard anodised,Warranty: 2 years,Weight: 610g (30.9mm) w/o cable and paddle shifter (90g),.Please Note: The 31.6 and 30.9 diameter options come with the 1x shifter style remote shown in the image, and are not suitable for use on bikes with 2X or 3X front gearing. Our current stock of the 27.2 diameter post comes with a 22.2 lever that is compatible with 2X or 3X front gearing.
Brand-X's Ascend Dropper Seatpost was so good they've decided to roll it out to the masses. The Ascend CX Dropper Seatpost is ideal for cyclocross, gravel, and road cyclists who feel the need to tweak their seatpost as they ride for customisable comfort.Smooth and Reliable Dropper SeatpostOperated easily via a paddle style remote on either side of your cockpit, the aluminium CX Dropper Seatpost is easily installed on bikes with internal cable routing. Cable actuated at the bottom of the dropper post via a linkage mechanism, the Brand-X dropper post eliminates cable pull/movement for a smooth and reliable performance.The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend CX Dropper Seatpost will carry on. Key Features:Material: T651-7075 Aluminium,Bar mounted paddle style remote lever and cable operated internal routing,Linkage mechanism eliminates any outer cable pull,Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism,Only compatible with internally routed bikes,Length: 458mm,Travel: 150mm,Cable Length: 1.5m,Finish: Sand blasted and hard anodised,Warranty: 2 years,.
The Ascend II XL externally routed dropper seatpost offers 170mm of travel. Ideal for taller riders or for those who like the added height adjustment, the Ascend II XL is available in both 30.9 and 31.6 seatpost diameters.AL6061-T6 AluminiumBar mounted remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero Offset one-piece head/ upper shaft with micro adjust clamping mechanismDiameter: 30.9mm or 31.6mmLength: 489mm (shaft is 264mm), Travel: 170mmCable Length: 1.5mFinish: Sand Blasted and Hard Anodised Black2 Year WarrantyWeight: 670g (31.6mm without cable/lever)Building on the success of the original Ascend, Brand- X now offer a long drop externally routed option with the Ascend II XL. The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing.The post comes with an ergonomic 1X lever. The cable is actuated from the mid cap ensuring zero cable movement. For those wishing to run a 2X set up, a right-hand mount 'paddle' lever is available. The Ascend Dropper seatpost set new standards for reliability and performance at a fantastic price point.
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
The Ascend II XL externally routed dropper seatpost offers 170mm of travel. Ideal for taller riders or for those who like the added height adjustment, the Ascend II XL is available in both 30.9 and 31.6 seatpost diameters.AL6061-T6 AluminiumBar mounted remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero Offset one-piece head/ upper shaft with micro adjust clamping mechanismDiameter: 30.9mm or 31.6mmLength: 489mm (shaft is 264mm), Travel: 170mmCable Length: 1.5mFinish: Sand Blasted and Hard Anodised Black2 Year WarrantyWeight: 670g (31.6mm without cable/lever)Building on the success of the original Ascend, Brand- X now offer a long drop externally routed option with the Ascend II XL. The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing.The post comes with an ergonomic 1X lever. The cable is actuated from the mid cap ensuring zero cable movement. For those wishing to run a 2X set up, a right-hand mount 'paddle' lever is available. The Ascend Dropper seatpost set new standards for reliability and performance at a fantastic price point.
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
Building on the success of the Ascend 01, Brand- X now offer a longer travel option. The additional travel is ideal for long legged riders or for those who need more adjustment. The post carries over the reliability and core qualities of the Ascend 01. Infinitely smoove adjustment and incredible value for money makes the Ascend XL the trend setter amongst the dropper post market. The Ascend Seatpost is only compatible with bikes that can use an internally routed dropper. (Please note that it cannot be converted to external cable actuated.)The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again. The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 499mm 170mm 120 154 30.9mm x 499mm 170mm 120 154 31.6mm x 559mm 200mm 150 184 30.9mm x 559mm 200mm 150 184 Service Guide Information Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide. Installation Guide Information Click here to view the Brand-X Ascend Internal Route Post Installation Guide.
Brand-X Ascend XL Dropper Seatpost (170 & 200mm)Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on.Ergonomic Dropper SeatpostThis Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter.Consistent PerformanceThe seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Features: Material: T651-7075 Aluminium Finish: Sand Blasted and Hard Anodised Black Bar mounted paddle style remote lever and cable operated internal routing Linkage mechanism eliminates any outer cable pull Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism Only compatible with internally routed bikes Diameter: 30.9mm or 31.6mm Travel: 170mm or 200mm Length: 170mm: 499mm; 200mm: 559mm Cable Length: 1.5m 2 Year Warranty Rider Weight: Min: 50-55kg; Max: 120kg Weight: 170mm: 638g; 200mm: 685gMinimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 499mm 170mm 120 154 30.9mm x 499mm 170mm 120 154 31.6mm x 559mm 200mm 150 184 30.9mm x 559mm 200mm 150 184 Service Guide Information:Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Installation Guide Information:Click here to view the Brand-X Ascend Internal Route Post Installation Guide.Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Ascend XL Dropper Seatpost (170 & 200mm)Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on.Ergonomic Dropper SeatpostThis Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter.Consistent PerformanceThe seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Features: Material: T651-7075 Aluminium Finish: Sand Blasted and Hard Anodised Black Bar mounted paddle style remote lever and cable operated internal routing Linkage mechanism eliminates any outer cable pull Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism Only compatible with internally routed bikes Diameter: 30.9mm or 31.6mm Travel: 170mm or 200mm Length: 170mm: 499mm; 200mm: 559mm Cable Length: 1.5m 2 Year Warranty Rider Weight: Min: 50-55kg; Max: 120kg Weight: 170mm: 638g; 200mm: 685gMinimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 499mm 170mm 120 154 30.9mm x 499mm 170mm 120 154 31.6mm x 559mm 200mm 150 184 30.9mm x 559mm 200mm 150 184 Service Guide Information:Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Installation Guide Information:Click here to view the Brand-X Ascend Internal Route Post Installation Guide.Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ready for fast and fun MTB adventures, this trail-ready wheelset features a durable 6061 alloy rim construction that's designed for exceptional strength on unpredictable off-road terrains. Brand-X has also equipped it with 32 J-Bend spokes that use a 3x lacing pattern to deliver additional toughness, stability and control. Coming kitted out with 6-bolt disc brake compatibility, this wheelset allows riders to benefit from smoother and more consistent braking performance as they weave between the trails at speed. One final highlight is its tubeless-ready design comes pre-taped for tubeless tyre set-up. This makes it a great choice of upgrade for running lower tyre pressures, increasing comfort and reducing the risk of flats.