This kit includes - a tap allowing you to grip the bushing and remove it - an installation tool allowing you to push the new bushing into the pedal body
Genuine alloy replacement chain stays for Nukeproof Mega 275 model years 2018-2020.
If you're installing a new pair of forks and re-using your Nukeproof Warhead headset, this crown race is the ideal part to help the forks to operate seamlessly with the bottom headset cup.
This is a genuine replacement Frame Protection Kit for the 2021-2022 Nukeproof Giga Carbon models. This high-quality clear sticker set is precision cut to cover the essential points on your frame. It is designed to protect the paint from unsightly damage and rub during use. This kit is only designed to be fitted to the 2021-2022 Carbon Giga models.
This MTB rim is made from a special blend of alloys, which give it a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you will enjoy the best of both worlds as you carve your way around the mountain. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against wear and corrosion. As a result, you'll benefit from being able to shred the trails in all weather conditions, without worrying about the elements ruining your gear. Nukeproof has ensured that their front and rear rim profiles are the same but due to the rear rim being more likely to take most of the hits, they have used a thicker sidewall for added strength. The front rim has a thinner sidewall, which allows for excellent weight savings and a perfect balance between strength and weight. If you want some extra security, or if you want to save some more weight, there is no problem using a pair of front or rear rims. Nukeproof use a sleeved rim as this allows them to have full control over the properties of the alloy. When you weld a rim it is exposed to a large amount of heat which changes the properties of the alloy in the area around the weld. This change can lead to a weak spot in the rim. Nukeproof's tolerances are so precise, they can ensure that the alloy properties are the same throughout the whole rim. Option RD Weight 27.5" Front 554.5 460g +/- 5% 27.5" Rear 554.3 490g +/- 5% 29" Front 592.5 510g +/- 5% 29" Rear 592.3 540g +/- 5%
The latest addition to Nukeproof’s award-winning Ridewear range, the Blackline Winter Gloves. Designed to offer maximum cold-weather performance, whilst enhancing the contact you have with your bike. The Blackline Winter glove is designed to keep you on the trails no matter the conditions. With a windproof, waterproof and breathable top layer, the Blackline Winter Glove keeps out the worst of the elements but crucially retains a non-bulky single-layer PU Clarino™ Palm. This ensures riders retain the contact they have with their bike. The silicone printed forefinger helps increase grip on the grips and brake lever, and the thumb is touchscreen compatible. There is also the added bonus of suede thumb fabric, perfect for wiping your lenses clean. High cuffs, with an adjustable wrist strap, keep dirt and moisture out and the warmth in, they also incorporate a pull-on tab for easy of fitment. Nukeproof Blackline Range Fully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have all the features they wanted out of their riding apparel. The Blackline range is Nukeproof’s premium trail collection
Made with 100% cotton, this Premium Nukeproof Tee is made from a soft jersey - slip it on when the sun is shining for casual comfort. The Nukeproof attitude graphics will be sure to make you stand out from the crowd.
Paired with infinitely adjustable saddle rail clamps, it’s easy to achieve the perfect saddle angle regardless of what bike you have or seat angle you are working with.
The Outland Dri Release Long Sleeve Tech Tee is cut in a relaxed fit with subtle prints to ensure you are as comfortable on the bike as you are having an “après shred” drink in the bar. Why choose DriRelease®? DriRelease® technology keeps customers cool, dry, fresh and comfortable in high-performance sportswear. The comfort of DriRelease® fabrics used for this Nukeproof Tee is not from chemical finishes but instead built into each thread meaning the benefits are absolutely permanent and much more eco-friendly. It will not wash out over time. The brilliance of DR fabrics is the engineered combination of hydrophobic and hydrophilic fibres that allow them to engage with moisture naturally to dramatically improve how wetness is pulled from the skin and released into the air. In a nutshell, the Outland DriRelease® Tech Tee combines the most important elements of any high performance riding jersey while keeping a soft cotton-like casual feel. Naturally odour resistant and ideal for a long day of fun summer riding. Screen printed graphics give the Tech Tee’s striking good looks. Not only will you look good, but you'll also feel good too, thanks to this excellent moisture management technology keeping you dry and fresh even when riding hard.
High-quality replacement Nukeproof spare parts.
The front body and sleeves of the Blackline Long Sleeve Jersey are constructed from a lightweight fabric (115gsm), highly breathable yarn that is super soft against the skin. Its mono stretch piquet fabric allows unrestricted movement and the increased wicking moisture alongside minimised drying manages your core temperature. It’s also abrasive resistant to ensure the Blackline Jersey stays looking fresh. The super lightweight (110 GSM) warp-knit back panel regulates body temperature by maximising the airflow out of the body and is both quick wicking and fast drying. The jersey is a trail fit, so designed to be worn loose against the body. Lastly, with its natural UV protection and an anti-bacterial finish, this is a jersey ideally suited to hitting the summer trails. Nukeproof have committed to using Bluesign® fabrics. This is a solution for sustainable textile production. It eliminates harmful substances right from the beginning of the manufacturing process and sets and controls standards for environmentally friendly and safe production. Nukeproof Blackline Fully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB-inspired cut/fit and have all the features they wanted out of their ride apparel. The Blackline range is their premium trail collection.
With a 130mm fork combined with 125mm of rear suspension, the Reactor ST combines the best of an enduro bike (long, low and slack) with the best of an XC Race bike (lightweight spec and efficient suspension) to create a sprightly yet seriously capable machine. Frame Construction: To optimise the weight, strength and stiffness, the Reactor 290 ST Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). Adjustable Geometry: The Reactor ST features a 66.8° (66.3° Low) Headangle atop a 76.3° (75.8° Low) seat angle across a 460mm reach on a Medium frame. We also offer the frame in Large and X-Large sizes. The Reactor ST frames feature the same “flip chip” design as the regular Reactor frame to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor ST into a more aggressive machine, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, we designed the four-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor ST some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor ST is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 290 Carbon, 125mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection • Fork: Fox 34 Float, Factory Series, Kashima, Grip 2 Damper, 130mm, 44mm Offset, BOOST, Black • Shock: Fox Float DPS, Factory Series, Kashima, 3 Position, EVOL LV, Custom LCL, LRL, CMF tune, 210x47.5mm, Bearing End 1x 0.2 Spacer fitted. • Front Wheel: Reynolds TR309 XC Front 28h, 29", Center-Lock, 110x15mm • Rear Wheel: Reynolds TR289 XC Rear 28h, 29", Center-Lock, Shimano Microspline Driver, 148x12mm • Tyres: Front: Maxxis Minion DHF 29”x2.3 3C MaxxTerra/EXO/TR, Rear: Maxxis Agressor 29”x2.3 MaxxTerra/EXO/TR • Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 30T, 52mm Chainline • Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV • Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus • Chain: Shimano XT M8100 HG 12-speed Inc Quicklink • Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T • Brakes: Shimano XT M8100, 2 Pot Brake, Metallic Pads • Front Rotor: Shimano RT-MT800, 180mm • Rear Rotor: Shimano RT-MT800, 180mm • Handlebars: Nukeproof Horizon Carbon V2 25mm Rise, Width - M780mm, L800mm, XL800mm • Stem: Nukeproof Horizon, 45mm, Black • Saddle: Nukeproof, Black • Seatpost: Bikeyoke Divine Stealth w Shimano SL-MT500-IL Remote lever, M:160mm drop; L/XL:185mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: TBD Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table for accurate information. Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 130mm Axle to Crown: 537mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x47.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
Filled with PrimaLoft® Insulation ThermoPlume® which is a 100% post-consumer insulation comprised of small, silky plumes of fibre that mimic the lightweight warmth, softness and compressibility of natural goose down. Made from 100% post-consumer recycled (PCN) polyester, this all-synthetic package features down comparable-performance insulating loft, wet weather protection and compressibility. Constructed with micro baffles for a slim profile that makes it perfect for layering, this jacket is super packable, folding into the internal pocket. Both shell and jacket lining are made from 100% Recycled Nylon, which is wind-resistant and synthetic down proof with a durable water-repellant (DWR) treatment. Two zipped hand pockets are ideal for all of your essentials, while elasticated cuffs and an adjustable lower hem are there to let you lock in as much warmth as possible. Plus, a YKK zipper with a silicone-grippy puller is easy to open and release heat even with gloves on.
Made from a tough durable Nylon outer layer and a moisture-wicking Coolmax inner layer, our waterproof socks also combine a middle layer waterproof membrane, which allows moisture to be drawn away from the foot while also keeping the rainwater out, keeping your feet fresh and comfortable for a longer day in the saddle. The quality design keeps these socks looking as fresh as they feel.
Designed for 2021-2022 Mega Carbon 275 models, these original Nukeproof covers offer great protection from their durable moulded silicone construction. Attaching to your chainstays via the 3M adhesive backing, the Mega Chain stay Protector is the ideal barrier against bangs, dings and dirt.
Engineered specifically for the 2020 Nukeproof Dissent, this genuine Nukeproof protector provides an exceptional barrier against mud, muck and riding mishaps thanks to their durable moulded silicone construction. It attaches to your frame's downtube via its 3M adhesive backing and offers outstanding protection against all types of dirt and damage.
Coming kitted out with a robust 6061 aluminium build, this mountain bike (MTB) frame offers exceptional strength and durability to guide you through the most demanding of terrain conditions. Nukeproof has also put this model through a hydroforming and triple-butting process for additional toughness as you charge from trail to trail. Another highlight is its updated geometry that includes internal cable routing for the best combination of comfort and control as well as a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this rugged aluminium frame is engineered for the demands of modern enduro racing. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Alloy V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. Full Suspension Alloy MTB Frame To optimise the strength and weight, the Mega is constructed fully out of T6061-T6 Aluminium including all forged parts. After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate Enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: · All new aluminium chassis · Designed and improved suspension kinematics · All new geometry · Optimised sizing/fit - Small to XXL · SRAM UDH · Now fits a 750ml water bottle inside the main front triangle! The Mega frame is optimised around the rider and weight distribution. The geometry features dynamic saddle offset. Seat angles are optimised for each frame size and the seat tube itself is designed to take a longer dropper post if required. Please Note: This frame does NOT come with a rear shock. Features: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 562mm Fork Offset: 37mm Rear Travel: 165mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Frame Sizing Options: S/M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 275 Alloy, 165mm Travel, custom triple butted hydro-formed tube set Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Shock: NO SHOCK FITTED - Requires 230x62.5mm size Headset: Nukeproof, 44-56 IITS Weight: 3.87Kgs/8.53lbs (Medium option)
Genuine alloy replacement seat stays for Nukeproof Mega 290 model years 2018-2019.
Ready for racing, this enduro-focused mountain bike (MTB) frame comes equipped with a hydroformed and triple-butted 6061-T6 aluminium build for the best balance of strength, durability and performance. Keeping your ride under control as you race across demanding terrain conditions. Another highlight is its race-ready geometry with internal cable routing, which provides smooth handling as well as a clean, sleek appearance. Coming complete with 148x12mm Boost rear hub spacing, this model is a great choice of upgrade for modern racing and for completing your enduro bike build. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Alloy V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. Triple-Butted Alloy Enduro MTB Frame To optimise the strength and weight, the Mega is constructed fully out of T6061-T6 Aluminium including all forged parts. After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: · All new Aluminium chassis · Designed and improved suspension kinematics · All new geometry · Optimised sizing/fit – Medium to XXL · SRAM UDH · Now fits a 750ml water bottle inside the main front triangle! The Mega frame is optimised around the rider and weight distribution. The geometry features dynamic saddle offset. Seat angles are optimised for each frame size and the seat tube itself is designed to take a longer dropper post if required. Features: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 160mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 290 Alloy, 160mm Travel, custom triple butted hydro-formed tube set Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Shock: NO SHOCK INCLUDED, 230x62.5mm required Headset: Nukeproof, 44-56 IITS Weight: 3.87Kgs/8.53lbs (Medium option)
Genuine alloy replacement chain stays for Nukeproof Mega 290 model years 2018-2020.