Nukeproof Dissent 297 Alloy Frame - GreyFeaturing a robust 6061 aluminium build, this full-suspension mountain bike (MTB) frame has been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you attack the trails. Engineered for riders who want to complete their mullet bike setup, this version also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another highlight is its 157x12mm rear hub Boost axle spacing, which delivers stiff and responsive handling on the most demanding of terrain conditions.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Lightweight Full Suspension MTB Frame with 200mm TravelThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Three-stage Dissent linkage Four position adjustable linkage progression chip system Three position adjustable chainstay length Weight: 5.06kgs/11.1lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 290 Alloy Frame - GreyAll set for charging from trail to trail, this full-suspension mountain bike (MTB) frame features a hydroformed and triple-butted 6061 aluminium construction that's impressively tough and dependable. Thanks to its 157x12mm Boost rear hub spacing, this model also allows for maximum stiffness and control on the more demanding of terrain conditions. Another highlight is its race-ready geometry that includes internal cable routing for a hassle-free, sleek finish. Coming complete with a RockShox Super Deluxe Coil Ultimate DH RC rear shock, this frame is engineered for smooth and consistent performance, wherever the trail leads you.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers.The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Race Ready Full Suspension MTB FrameThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 190mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x70mm, Bearing End, Red Coil Spring (M=400LBS/L=450LBS /XL=500LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 190mm Wheels Size: 29" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x70mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing Three-stage Dissent linkage 4 position adjustable linkage progression chip system 3 Position adjustable chainstay length Weight: 5.14kgs/11.3lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Cub-Scout 20 Mountain Bike FrameSpecifically designed for kid's who want to progress into the world of mountain bike riding, this mountain bike (MTB) frame is all set for day-long trail riding adventures. Featuring a high-quality 6061 triple-butted aluminium build, this model is more than capable of handling all the knocks and bumps associated with young rider's practising and perfecting their skills. With its comfortable geometry, 20" wheel size and Kevlar chainstay protector, this is a great choice of upgrade for building confidence, wherever their next ride takes them.20" Kid's MTB FrameThe Cub-Scout 20” Race is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 20” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of the brand's own children, Nukeproof have created a class-leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners!The range of Cub-Scout Hardtail frames are available in 20”, 24” or 26” options; meaning that there should be a Cub-Scout to suit kids of all sizes from aged 5 and up. Each frame features a lightweight custom butted 6061 alloy frameset with bang up to date long, low and slack kids specific geometry.Features: Material: Nukeproof Cub-Scout 20”, custom triple-butted hydro-formed 6061 Alloy Use: Kid's Mountain Bike (MTB) Frame Fork Travel: 80mm Axle to Crown: 385mm Fork Offset: 38mm Wheels Size: 20" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44mm Semi-Integrated Headset: ZS44-28.6 - T2 / EX44/40 - B5 (For Tapered Steerer fork) Seatpost: 27.2mm Seat Clamp: 31.8mm Bottom Bracket: Threaded 68mm BSA Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Weight: 1.8kgBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Wheel ARD and Sealant BundleComing equipped with the brand's extensively trailed and tested alloy blend, this wheelset features a rim construction that's specifically made to meet the demands of both enduro and downhill (DH) riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, it gives you the best of both worlds in terms of strength, stiffness and weight.Both rims have the same profile, but the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this wheelset. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time penetrating. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThe Nukeproof Horizon V2 rear hub has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose to upgrade your drivetrain in the future.The 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with its louder pawls and springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included?Wheels come taped with a tubeless valve installed, so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.A pair of ARD inserts are also supplied to give you maximum protection and there is a 500ml bottle of lifeline sealant in the box too, all you need to do is add your favourite tyres.By using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you a much-increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.Features: Rim Material: Alloy Nukeproof Blend Use: Mountain Bike (MTB), All Mountain (AM), Enduro and Downhill (DH) Axle Spacing: Front: 15x110mm; Rear 12x148mm Rim Width: Inner: 30mm; 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Brake Rotor Compatibility: 6-bolt disc brake Conversion Options: 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD (choose freehub option from the menu) Rear Hub Engagement: 102 points of engagement (every 3.52°) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Build: Hand built Supplied with: Pair of wheels, valves, pre-taped, pair of ARD tyre inserts, 500ml bottle of Lifeline sealant Single or Pair: Pair Weight: Front: 897g; Rear: 1146g, ARD: 144g each (Weights include tape & valve)A full range of spares are available to service your hub in the future.141mm rear conversion kit for HG / XD freehubs available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR Manufacturer's Part Numbers: NUKHOR2021BF29HG Black HG 29" NUKHOR2021BF29XD Black XD 29" NUKHOR2021BF29MS Black MS 29" NUKHOR2021BF275HG Black HG 27.5" NUKHOR2021BF275XD Black XD 27.5" NUKHOR2021BF275MS Black MS 27.5"Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Wheel ARD and Sealant BundleComing equipped with the brand's extensively trailed and tested alloy blend, this wheelset features a rim construction that's specifically made to meet the demands of both enduro and downhill (DH) riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, it gives you the best of both worlds in terms of strength, stiffness and weight.Both rims have the same profile, but the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this wheelset. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time penetrating. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThe Nukeproof Horizon V2 rear hub has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose to upgrade your drivetrain in the future.The 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with its louder pawls and springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included?Wheels come taped with a tubeless valve installed, so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.A pair of ARD inserts are also supplied to give you maximum protection and there is a 500ml bottle of lifeline sealant in the box too, all you need to do is add your favourite tyres.By using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you a much-increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.Features: Rim Material: Alloy Nukeproof Blend Use: Mountain Bike (MTB), All Mountain (AM), Enduro and Downhill (DH) Axle Spacing: Front: 15x110mm; Rear 12x148mm Rim Width: Inner: 30mm; 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Brake Rotor Compatibility: 6-bolt disc brake Conversion Options: 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD (choose freehub option from the menu) Rear Hub Engagement: 102 points of engagement (every 3.52°) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Build: Hand built Supplied with: Pair of wheels, valves, pre-taped, pair of ARD tyre inserts, 500ml bottle of Lifeline sealant Single or Pair: Pair Weight: Front: 897g; Rear: 1146g, ARD: 144g each (Weights include tape & valve)A full range of spares are available to service your hub in the future.141mm rear conversion kit for HG / XD freehubs available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR Manufacturer's Part Numbers: NUKHOR2021BF29HG Black HG 29" NUKHOR2021BF29XD Black XD 29" NUKHOR2021BF29MS Black MS 29" NUKHOR2021BF275HG Black HG 27.5" NUKHOR2021BF275XD Black XD 27.5" NUKHOR2021BF275MS Black MS 27.5"Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Scout 290 Alloy MTB FrameThe Scout 290 frame is a fast-rolling, slack geometry hardtail mountain bike (MTB) that is ideal for singletrack trail riding, bike park sessions and epic all-mountain adventures. It is engineered using 6061 aluminium and features a triple butted hydro-formed construction for durable, reliable and stylish performance anywhere in the hills. It is also compatible with 29" (29er) wheels, 140mm-travel suspension forks and offers wide tyre clearance for up to 2.6" tyres. The Scout 290 is a versatile and dependable hardtail frame suited to having fun on off-road trails anywhere on Earth.The Hardtail: Often mooted as the perfect style bike to master your first pedal strokes into the world of mountain biking or the best way to develop your bike handling skills. Mastering a hardtail will sharpen your skills from perfecting your balance point on the bike through to being creative with the trail ahead reading natural features to generate speed. One thing is for sure though; you shouldn't underestimate what this hardtail is truly capable of. The all-new Scout is a graduate from the school of gravity. Its geometry is on the “aggressive” side of coin, designed to attack the trail ahead. The new pedalling position, developed using Nukeproof's Saddle Offset theory, will propel you efficiently up the trail ready for the gnarliest descent you can handle. The new geometry adds to the all-round capability of the Scout. Improved riding position and sizing combined with a low bottom bracket enhances your control in the corners. The Scout is a versatile frame; ready to scout out endless single track, session technical enduro trails or just hoon around like you're auditioning for the latest “Scoutin' About” video epic. The Nukeproof Scout is the embodiment of the Nukeproof attitude. In riding a Scout, you become part of something special; every ride of this hardcore hardtail rewards every last drop of your skill and commitment when riding. In owning a Scout, you are inducted into something a little bit special too, that subtle nod of appreciation from other Scout owners that you too know what a special frame this is, through to the support and community that has grown around Scout ownership. The New Scout, welcome to the world of Scoutin' about, it really is an attitude.The 3rd generation the Scout has been tweaked to be the finest vintage of Scout. Key upgrades include: All New Frame: The frame itself has matured slightly. Subtle touches such as moulded protection through to new UDH (universal derailleur hanger) dropouts to name but a few of the upgrades. “Tweaked” Geometry: Nukeproof loved the way the V2 Scout rode, but a few subtle updates to areas such as the seat tube and head tube angles make this latest version even better. Improved Sizing: The new Scout offers size specific chainstays as well as improved spacing of sizes to match the rest of the Nukeproof range. Sizing: Scout comes from Small to XL in 275 and Medium to XXL in the 290 version, updated geometry to give the V3 Scout more efficiency to the trails and more attitude on the trails. The all new Nukeproof Scout builds on the cult like “Scoutin' About” attitude of the hardtail. Buying a Scout means not only do you get the raddest hardtail on the market, join one of the best communities of bikers.Specification: Frame: Nukeproof Scout 290, custom triple butted hydro-formed 6061-T6 Aluminium tubeset Internal cable routing for Dropper Seatpost ISCG05 mount Threaded 73mm BB Boost 148mm rear axle spacing Seatclamp: Nukeproof Horizon 34.9mm Headset: Nukeproof, 44-56 IITS 3D Contoured Rubber Frame Protection for DT/SS/CS Weight: 2.3kgs/5lbs (Medium)Key Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 140mm (150mm RS) Axle to Crown: 551mm Fork Offset: 42mm Wheels Size: 29" Max Tyre Size: 2.6" Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Post Mount Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Max Chainring Size: 34T (32T Oval)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Solum 260 Alloy FrameThe Solum 260 is the ideal freestyle mountain bike (MTB) frame for dirt jump trail riding, 4-cross (4X) racing, dual-slalom sessions and a playful singletrack trail riding experience. It features a robust and lightweight alloy frame that is ideal for 100mm-travel suspension forks and has modern geometry that's optimised for use with 26" wheels and offers tyre clearance for wide 2.3" tyres.Re-introducing the Solum!Originally introduced to the Nukeproof range back in 2013; the 4130 Steel Solum was Nukeproof's first dirt jump specific frame offering that was designed to bridge the gap between BMX and MTB. The brand new solum picks up where the old one left off but brings the idea bang-up to date. With revised geometry and an all-new lightweight yet bombproof aluminium chassis, the Solum is ready for anything at your local pump track, sessioning your dirt jump spot or racing dual slalom and 4-Cross. Features: All new hydroformed 6061-T6 Custom Triple-Butted Aluminium tube set One Piece Chain Stay Yoke Reinforced Seat Stay bridge Single-speed Specific 44-56 Tapered Headtube Integrated Chain Tugs with Horizontal Drop Out External Cable routing for easy maintenance 135x10mm hub spacing Threaded 73mm Bottom Bracket Max Chainring Size: 32T Max Tyre Clearance: 2.3” 160IS Brake Mount Headset and seat clamp included Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Solum 260 Alloy FrameThe Solum 260 is the ideal freestyle mountain bike (MTB) frame for dirt jump trail riding, 4-cross (4X) racing, dual-slalom sessions and a playful singletrack trail riding experience. It features a robust and lightweight alloy frame that is ideal for 100mm-travel suspension forks and has modern geometry that's optimised for use with 26" wheels and offers tyre clearance for wide 2.3" tyres.Re-introducing the Solum!Originally introduced to the Nukeproof range back in 2013; the 4130 Steel Solum was Nukeproof's first dirt jump specific frame offering that was designed to bridge the gap between BMX and MTB. The brand new solum picks up where the old one left off but brings the idea bang-up to date. With revised geometry and an all-new lightweight yet bombproof aluminium chassis, the Solum is ready for anything at your local pump track, sessioning your dirt jump spot or racing dual slalom and 4-Cross. Features: All new hydroformed 6061-T6 Custom Triple-Butted Aluminium tube set One Piece Chain Stay Yoke Reinforced Seat Stay bridge Single-speed Specific 44-56 Tapered Headtube Integrated Chain Tugs with Horizontal Drop Out External Cable routing for easy maintenance 135x10mm hub spacing Threaded 73mm Bottom Bracket Max Chainring Size: 32T Max Tyre Clearance: 2.3” 160IS Brake Mount Headset and seat clamp included Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Solum 260 Alloy FrameThe Solum 260 is the ideal freestyle mountain bike (MTB) frame for dirt jump trail riding, 4-cross (4X) racing, dual-slalom sessions and a playful singletrack trail riding experience. It features a robust and lightweight alloy frame that is ideal for 100mm-travel suspension forks and has modern geometry that's optimised for use with 26" wheels and offers tyre clearance for wide 2.3" tyres.Re-introducing the Solum!Originally introduced to the Nukeproof range back in 2013; the 4130 Steel Solum was Nukeproof's first dirt jump specific frame offering that was designed to bridge the gap between BMX and MTB. The brand new solum picks up where the old one left off but brings the idea bang-up to date. With revised geometry and an all-new lightweight yet bombproof aluminium chassis, the Solum is ready for anything at your local pump track, sessioning your dirt jump spot or racing dual slalom and 4-Cross. Features: All new hydroformed 6061-T6 Custom Triple-Butted Aluminium tube set One Piece Chain Stay Yoke Reinforced Seat Stay bridge Single-speed Specific 44-56 Tapered Headtube Integrated Chain Tugs with Horizontal Drop Out External Cable routing for easy maintenance 135x10mm hub spacing Threaded 73mm Bottom Bracket Max Chainring Size: 32T Max Tyre Clearance: 2.3” 160IS Brake Mount Headset and seat clamp included Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 297 Carbon Frame (EXT Shock)The Mega 297 Carbon EXT features an ultra-strong monocoque carbon fibre construction that is equipped with a durable and high-performance EXT STORIA LOK V3 Coil rear shock. This mountain bike (MTB) frame offers the best balance of stiffness, strength and low weight performance for intense trail riding. The ideal frame for enduro racing, epic all-mountain adventures and bike park sessions, this race-ready frame features modern enduro geometry with internally piped cable routing, making it ideal for handling the demands of enduro racing while also providing a clean, sleek finish.For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing.Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size.Full Suspension Carbon Fibre MTB FrameTo optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.EXT STORIA LOK V3 Rear ShockThe STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working.In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydralic bottom out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues.This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel.The STORIA V3 is also designed to serve riders who want maximum performance of a pedal-platform equipped shock, with a great support on the last millimeters of bike rear travel, with the great performance of a coilover shock.Nukeproof's Ultimate Enduro Race BikeAfter winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: All new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangleThe updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through a seat angle that is bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.Nukeproof has provided a setup guide for the EXT V3 rear shock. It can be downloaded hereEXT STORIA LOK V3 Rear Shock Sping "Weights"400lbs - Small 425lbs - Medium 450lbs - Large 500lbs - X-Large550lbs - XX-LargeFeatures: Material: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre Use: Enduro, All Mountain Shock: EXT STORIA LOK V3 Coil 230X62.5 Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium option)EXT STORIA LOK V3 Rear Shock Benefits: Custom tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology - Progressive opening - Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swapBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 297 Carbon Frame (EXT Shock)The Mega 297 Carbon EXT features an ultra-strong monocoque carbon fibre construction that is equipped with a durable and high-performance EXT STORIA LOK V3 Coil rear shock. This mountain bike (MTB) frame offers the best balance of stiffness, strength and low weight performance for intense trail riding. The ideal frame for enduro racing, epic all-mountain adventures and bike park sessions, this race-ready frame features modern enduro geometry with internally piped cable routing, making it ideal for handling the demands of enduro racing while also providing a clean, sleek finish.For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing.Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size.Full Suspension Carbon Fibre MTB FrameTo optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.EXT STORIA LOK V3 Rear ShockThe STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working.In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydralic bottom out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues.This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel.The STORIA V3 is also designed to serve riders who want maximum performance of a pedal-platform equipped shock, with a great support on the last millimeters of bike rear travel, with the great performance of a coilover shock.Nukeproof's Ultimate Enduro Race BikeAfter winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: All new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangleThe updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through a seat angle that is bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.Nukeproof has provided a setup guide for the EXT V3 rear shock. It can be downloaded hereEXT STORIA LOK V3 Rear Shock Sping "Weights"400lbs - Small 425lbs - Medium 450lbs - Large 500lbs - X-Large550lbs - XX-LargeFeatures: Material: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre Use: Enduro, All Mountain Shock: EXT STORIA LOK V3 Coil 230X62.5 Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium option)EXT STORIA LOK V3 Rear Shock Benefits: Custom tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology - Progressive opening - Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swapBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 275 Carbon Frame - BlackFeaturing an ultra-strong T700/800 monocoque carbon fibre construction, this race-ready full-suspension mountain bike (MTB) frame delivers increased stiffness and strength without any weight penalty. Lightweight and responsive, Nukeproof has also equipped it with updated geometry for smooth handling and internally piped cable routing for a clean, sleek appearance. Engineered for the most demanding of racing conditions, it also comes kitted out with a Factory Series Fox Float X2 rear shock for increased traction, tuneability and smoothness. Coming complete with 148x12mm Boost rear hub spacing and a range of updated features, this carbon frame is an ideal choice of upgrade for completing your enduro bike build.For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing.Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size.Carbon Fibre Full-Suspension Enduro MTB FrameTo optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include:· All new UD Carbon chassis· Improved suspension kinematics· Tube-In-Tube design for easy cable installation· All new geometry· Optimised sizing/fit - Small to XXL· SRAM UDH· Room for a 750ml water bottle inside the main front triangleThe updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through seat angles which are bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.Features: Material: Nukeproof Mega V4 275 Carbon, 165mm Travel, ultra-strong T700/800 monocoque UD Carbon Fibre frame Use: Mountain Bike (MTB) frame Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x65mm, Bearing End, 2x 0.3 spacer fitted. (SHORT ID: D7JJ) Fork Travel: 170mm Axle to Crown: 562mm Fork Offset: 37mm Rear Travel: 165mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: Nukeproof, 44-56 IITS, ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.88Kgs/8.55lbs (Tubeless) Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 297 Carbon Frame (EXT Shock)The Mega 297 Carbon EXT features an ultra-strong monocoque carbon fibre construction that is equipped with a durable and high-performance EXT STORIA LOK V3 Coil rear shock. This mountain bike (MTB) frame offers the best balance of stiffness, strength and low weight performance for intense trail riding. The ideal frame for enduro racing, epic all-mountain adventures and bike park sessions, this race-ready frame features modern enduro geometry with internally piped cable routing, making it ideal for handling the demands of enduro racing while also providing a clean, sleek finish.For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing.Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size.Full Suspension Carbon Fibre MTB FrameTo optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.EXT STORIA LOK V3 Rear ShockThe STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working.In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydralic bottom out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues.This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel.The STORIA V3 is also designed to serve riders who want maximum performance of a pedal-platform equipped shock, with a great support on the last millimeters of bike rear travel, with the great performance of a coilover shock.Nukeproof's Ultimate Enduro Race BikeAfter winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: All new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangleThe updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through a seat angle that is bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.Nukeproof has provided a setup guide for the EXT V3 rear shock. It can be downloaded hereEXT STORIA LOK V3 Rear Shock Sping "Weights"400lbs - Small 425lbs - Medium 450lbs - Large 500lbs - X-Large550lbs - XX-LargeFeatures: Material: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre Use: Enduro, All Mountain Shock: EXT STORIA LOK V3 Coil 230X62.5 Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium option)EXT STORIA LOK V3 Rear Shock Benefits: Custom tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology - Progressive opening - Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swapBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Solum 260 Alloy FrameThe Solum 260 is the ideal freestyle mountain bike (MTB) frame for dirt jump trail riding, 4-cross (4X) racing, dual-slalom sessions and a playful singletrack trail riding experience. It features a robust and lightweight alloy frame that is ideal for 100mm-travel suspension forks and has modern geometry that's optimised for use with 26" wheels and offers tyre clearance for wide 2.3" tyres.Re-introducing the Solum!Originally introduced to the Nukeproof range back in 2013; the 4130 Steel Solum was Nukeproof's first dirt jump specific frame offering that was designed to bridge the gap between BMX and MTB. The brand new solum picks up where the old one left off but brings the idea bang-up to date. With revised geometry and an all-new lightweight yet bombproof aluminium chassis, the Solum is ready for anything at your local pump track, sessioning your dirt jump spot or racing dual slalom and 4-Cross. Features: All new hydroformed 6061-T6 Custom Triple-Butted Aluminium tube set One Piece Chain Stay Yoke Reinforced Seat Stay bridge Single-speed Specific 44-56 Tapered Headtube Integrated Chain Tugs with Horizontal Drop Out External Cable routing for easy maintenance 135x10mm hub spacing Threaded 73mm Bottom Bracket Max Chainring Size: 32T Max Tyre Clearance: 2.3” 160IS Brake Mount Headset and seat clamp included Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Scout 275 Alloy MTB FrameRide off-road trails anywhere with agility, pace and style, the Scout 275 Alloy hardtail frame urges you to ride faster while sharpening your skills as you read the trail ahead and navigate the best lines to ride smooth and carry speed. Engineered from durable and lightweight triple butted hydro-formed 6061 aluminium and compatible with 27.5" wheels, 140mm-travel suspension forks and offers tyre clearance for 2.6"-wide trail tyres - the Scout 275 is a superb go-anywhere, do-it-all hardtail mountain bike (MTB) frame.The Hardtail: Often mooted as the perfect style bike to master your first pedal strokes into the world of mountain biking or the best way to develop your bike handling skills. Mastering a hardtail will sharpen your skills from perfecting your balance point on the bike through to being creative with the trail ahead reading natural features to generate speed. One thing is for sure though; you shouldn't underestimate what this hardtail is truly capable of. The all-new Scout is a graduate from the school of gravity. Its geometry is on the “aggressive” side of coin, designed to attack the trail ahead. The new pedalling position, developed using Nukeproof's Saddle Offset theory, will propel you efficiently up the trail ready for the gnarliest descent you can handle. The new geometry adds to the all-round capability of the Scout. Improved riding position and sizing combined with a low bottom bracket enhances your control in the corners. The Scout is a versatile frame; ready to scout out endless single track, session technical enduro trails or just hoon around like you're auditioning for the latest “Scoutin' About” video epic. The Nukeproof Scout is the embodiment of the Nukeproof attitude. In riding a Scout, you become part of something special; every ride of this hardcore hardtail rewards every last drop of your skill and commitment when riding. In owning a Scout, you are inducted into something a little bit special too, that subtle nod of appreciation from other Scout owners that you too know what a special frame this is, through to the support and community that has grown around Scout ownership. The New Scout, welcome to the world of Scoutin' about, it really is an attitude.The 3rd generation the Scout has been tweaked to be the finest vintage of Scout. Key upgrades include: All New Frame: The frame itself has matured slightly. Subtle touches such as moulded protection through to new UDH (universal derailleur hanger) dropouts to name but a few of the upgrades. “Tweaked” Geometry: Nukeproof loved the way the V2 Scout rode, but a few subtle updates to areas such as the seat tube and head tube angles make this latest version even better. Improved Sizing: The new Scout offers size specific chainstays as well as improved spacing of sizes to match the rest of the Nukeproof range. Sizing: Scout comes from Small to XL in 275 and Medium to XXL in the 290 version, updated geometry to give the V3 Scout more efficiency to the trails and more attitude on the trails. The all new Nukeproof Scout builds on the cult like “Scoutin' About” attitude of the hardtail. Buying a Scout means not only do you get the raddest hardtail on the market, join one of the best communities of bikers.Specification: Frame: Nukeproof Scout 275, custom triple butted hydro-formed 6061-T6 Aluminium tubeset Internal cable routing for Dropper Seatpost ISCG05 mount Threaded 73mm BB Boost 148mm rear axle spacing Seatclamp: Nukeproof Horizon 34.9mm Headset: Nukeproof, 44-56 IITS 3D Contoured Rubber Frame Protection for DT/SS/CS Weight: 2.3kgs/5lbs (Medium)Key Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 140mm (150mm RS) Axle to Crown: 532mm Fork Offset: 44mm Wheels Size: 27.5" Max Tyre Size: 2.6" Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Post Mount Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Max Chainring Size: 34T (32T Oval)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Wheel ARD and Sealant BundleComing equipped with the brand's extensively trailed and tested alloy blend, this wheelset features a rim construction that's specifically made to meet the demands of both enduro and downhill (DH) riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, it gives you the best of both worlds in terms of strength, stiffness and weight.Both rims have the same profile, but the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this wheelset. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time penetrating. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThe Nukeproof Horizon V2 rear hub has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose to upgrade your drivetrain in the future.The 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with its louder pawls and springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included?Wheels come taped with a tubeless valve installed, so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.A pair of ARD inserts are also supplied to give you maximum protection and there is a 500ml bottle of lifeline sealant in the box too, all you need to do is add your favourite tyres.By using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you a much-increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.Features: Rim Material: Alloy Nukeproof Blend Use: Mountain Bike (MTB), All Mountain (AM), Enduro and Downhill (DH) Axle Spacing: Front: 15x110mm; Rear 12x148mm Rim Width: Inner: 30mm; 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Brake Rotor Compatibility: 6-bolt disc brake Conversion Options: 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD (choose freehub option from the menu) Rear Hub Engagement: 102 points of engagement (every 3.52°) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Build: Hand built Supplied with: Pair of wheels, valves, pre-taped, pair of ARD tyre inserts, 500ml bottle of Lifeline sealant Single or Pair: Pair Weight: Front: 897g; Rear: 1146g, ARD: 144g each (Weights include tape & valve)A full range of spares are available to service your hub in the future.141mm rear conversion kit for HG / XD freehubs available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR Manufacturer's Part Numbers: NUKHOR2021BF29HG Black HG 29" NUKHOR2021BF29XD Black XD 29" NUKHOR2021BF29MS Black MS 29" NUKHOR2021BF275HG Black HG 27.5" NUKHOR2021BF275XD Black XD 27.5" NUKHOR2021BF275MS Black MS 27.5"Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Reactor 290 Carbon FrameThis mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build for excellent stiffness and durability, without weighing down your ride with unnecessary excess grams. Nukeproof has also kitted out this model with a Factory Series Fox Float X rear shock, which delivers smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing that allows you to enjoy trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is an ideal choice of upgrade for completing your full suspension MTB bike build.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Carbon MTB FrameTo optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre Use: Mountain Bike (MTB) frame Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.5Kgs/7.7lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Scout 275 Alloy MTB FrameRide off-road trails anywhere with agility, pace and style, the Scout 275 Alloy hardtail frame urges you to ride faster while sharpening your skills as you read the trail ahead and navigate the best lines to ride smooth and carry speed. Engineered from durable and lightweight triple butted hydro-formed 6061 aluminium and compatible with 27.5" wheels, 140mm-travel suspension forks and offers tyre clearance for 2.6"-wide trail tyres - the Scout 275 is a superb go-anywhere, do-it-all hardtail mountain bike (MTB) frame.The Hardtail: Often mooted as the perfect style bike to master your first pedal strokes into the world of mountain biking or the best way to develop your bike handling skills. Mastering a hardtail will sharpen your skills from perfecting your balance point on the bike through to being creative with the trail ahead reading natural features to generate speed. One thing is for sure though; you shouldn't underestimate what this hardtail is truly capable of. The all-new Scout is a graduate from the school of gravity. Its geometry is on the “aggressive” side of coin, designed to attack the trail ahead. The new pedalling position, developed using Nukeproof's Saddle Offset theory, will propel you efficiently up the trail ready for the gnarliest descent you can handle. The new geometry adds to the all-round capability of the Scout. Improved riding position and sizing combined with a low bottom bracket enhances your control in the corners. The Scout is a versatile frame; ready to scout out endless single track, session technical enduro trails or just hoon around like you're auditioning for the latest “Scoutin' About” video epic. The Nukeproof Scout is the embodiment of the Nukeproof attitude. In riding a Scout, you become part of something special; every ride of this hardcore hardtail rewards every last drop of your skill and commitment when riding. In owning a Scout, you are inducted into something a little bit special too, that subtle nod of appreciation from other Scout owners that you too know what a special frame this is, through to the support and community that has grown around Scout ownership. The New Scout, welcome to the world of Scoutin' about, it really is an attitude.The 3rd generation the Scout has been tweaked to be the finest vintage of Scout. Key upgrades include: All New Frame: The frame itself has matured slightly. Subtle touches such as moulded protection through to new UDH (universal derailleur hanger) dropouts to name but a few of the upgrades. “Tweaked” Geometry: Nukeproof loved the way the V2 Scout rode, but a few subtle updates to areas such as the seat tube and head tube angles make this latest version even better. Improved Sizing: The new Scout offers size specific chainstays as well as improved spacing of sizes to match the rest of the Nukeproof range. Sizing: Scout comes from Small to XL in 275 and Medium to XXL in the 290 version, updated geometry to give the V3 Scout more efficiency to the trails and more attitude on the trails. The all new Nukeproof Scout builds on the cult like “Scoutin' About” attitude of the hardtail. Buying a Scout means not only do you get the raddest hardtail on the market, join one of the best communities of bikers.Specification: Frame: Nukeproof Scout 275, custom triple butted hydro-formed 6061-T6 Aluminium tubeset Internal cable routing for Dropper Seatpost ISCG05 mount Threaded 73mm BB Boost 148mm rear axle spacing Seatclamp: Nukeproof Horizon 34.9mm Headset: Nukeproof, 44-56 IITS 3D Contoured Rubber Frame Protection for DT/SS/CS Weight: 2.3kgs/5lbs (Medium)Key Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 140mm (150mm RS) Axle to Crown: 532mm Fork Offset: 44mm Wheels Size: 27.5" Max Tyre Size: 2.6" Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Post Mount Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Max Chainring Size: 34T (32T Oval)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 297 Alloy Frame - GreyFeaturing a robust 6061 aluminium build, this full-suspension mountain bike (MTB) frame has been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you attack the trails. Engineered for riders who want to complete their mullet bike setup, this version also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another highlight is its 157x12mm rear hub Boost axle spacing, which delivers stiff and responsive handling on the most demanding of terrain conditions.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Lightweight Full Suspension MTB Frame with 200mm TravelThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Three-stage Dissent linkage Four position adjustable linkage progression chip system Three position adjustable chainstay length Weight: 5.06kgs/11.1lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Reactor 290 Carbon FrameThis mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build for excellent stiffness and durability, without weighing down your ride with unnecessary excess grams. Nukeproof has also kitted out this model with a Factory Series Fox Float X rear shock, which delivers smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing that allows you to enjoy trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is an ideal choice of upgrade for completing your full suspension MTB bike build.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Carbon MTB FrameTo optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre Use: Mountain Bike (MTB) frame Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.5Kgs/7.7lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.