A top-of-the-toolbox choice for all weight obsessed ridersCommonly called a Gram scale this highly accurate tabletop scale is perfect for weighing small parts and componentsMeasures in both grams and ouncesAccurate to within 2 grams / 1000 grams 2 grams / 2000g and 3 grams / 3000 gramsTare feature which resets the counter to zero to exclude the weight of a container3000 gram (106 oz) maximum capacityBattery included
Park Tool Tabletop Digital Scales DS-2This highly accurate tabletop scale is perfect for weighing small parts and components in grams or ounces.Accurate to within 2g/ 1000g, 2g/ 2000g, 3g/ 3000g Tare feature to exclude weight of container Switches easily between grams and ounces 3000 gram (106oz) capacity Battery included (one of size CR2032)Buy Park Tool Tabletop Digital Scales from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool CN10C Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing. Cold forged, heat treated steel handles for strengthPrecision ground cutting jaws for a clean cut on every cableBuilt in crimper for cable end caps and forming hole for reforming housing ends and housing ferrulesWire latch holds handles together when not in useThe CN10C has cold forged, heat treated steel handles for strength and precision ground cutting jaws for a clean cut on every cable. Dual density moulded grips are specially contoured for superior comfort and control. The CN10C has a built in crimper for cable end caps and a forming hole for reforming housing ends and housing ferrules. A wire latch holds the handles together when not in use.
Park Tool Cable Stretcher BT-2Park Tool Fourth Hand Cable Stretcher BT-2Commonly referred to as a “4th Hand”, the Park Tool Cable Stretcher pulls cables tight for adjustment of derailleurs and brakes. It features one-hand operation with a thumb lock to hold the cable tight while your hand is freed up to tighten pull-up bolts and nuts.A must for any shop, home or professional.Thumb lock for one-handed operation Made from chrome plated heat treated steel Cushion grips for comfortBuy Park Tool Fourth Hand Cable Stretcher from Chain Reaction Cycles, the World's Largest Online Bike Store.
This shop quality Preset Torque Driver from Park Tool is a great tool for ensuring you apply the correct torque to fasteners helping to prevent over-tightening and damage to components.Preset to a predetermined torque setting¼ inch hex driveIncludes 3, 4, 5mm and T25 bits stored in the handleLimits torque applied to fasteners while rotating clockwiseAll metal internal construction for long lifeComfortable ergonomic composite molded gripIncludes 3mm, 4mm, 5mm and T25 bits (stored in handle)With an all metal internal construction and a comfortable ergonomic composite moulded grip you can be sure that this tool is built to last.
This shop quality Preset Torque Driver from Park Tool is a great tool for ensuring you apply the correct torque to fasteners helping to prevent over-tightening and damage to components.Preset to a predetermined torque setting¼ inch hex driveIncludes 3, 4, 5mm and T25 bits stored in the handleLimits torque applied to fasteners while rotating clockwiseAll metal internal construction for long lifeComfortable ergonomic composite molded gripIncludes 3mm, 4mm, 5mm and T25 bits (stored in handle)With an all metal internal construction and a comfortable ergonomic composite moulded grip you can be sure that this tool is built to last.
This shop quality Preset Torque Driver from Park Tool is a great tool for ensuring you apply the correct torque to fasteners helping to prevent over-tightening and damage to components.Preset to a predetermined torque setting¼ inch hex driveIncludes 3, 4, 5mm and T25 bits stored in the handleLimits torque applied to fasteners while rotating clockwiseAll metal internal construction for long lifeComfortable ergonomic composite molded gripIncludes 3mm, 4mm, 5mm and T25 bits (stored in handle)With an all metal internal construction and a comfortable ergonomic composite moulded grip you can be sure that this tool is built to last.
It features one-hand operation with a thumb lock to hold the cable tight while your hand is removed to tighten pull-up bolts and nuts. Made from heat treated tool steel, chrome plated, and featuring cushion grips for comfort. A must for any shop, home or professional mechanic.
Park Tool Clamping Spoke Holder CSH-1The Clamping Spoke Holder CSH-1 from Park Tool is engineered to ensure spokes cannot move, twist or rotate as you build and fine-tune when building wheels. It features a steel body and ergonomic high-density grips that ensure flex-free precision and long-lasting comfort throughout use. And this tool is compatible with J-bend, bladed and straight-pull spokes, making your wheel building process easier and more precise.Stops Spoke Rotation for Precise Wheel BuildingYour new favourite tool for truing and building wheels. The CSH-1 securely holds spokes in place during spoke tension adjustment to prevent wind-up of round and bladed spokes, as well as stopping rotation of straight-pull spokes. The versatile head can grip spokes in multiple positions for optimal leverage and hand positioning. Constructed of forged heat-treated steel with comfortable dual-density grips, this spoke holder is durable and stable for reliable and comfortable daily use. Features: Material: Body: Forged Heat-Treated Steel; Grips: Dual-Density Rubber Spoke Compatibility: J-Bend, Bladed, Straight-pull Holds spokes securely and stops rotation and twisting as you build wheelsBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
A sturdy yet portable wheel dishing toolAllows you to accurately measure how centrally the rim sits over the hub avoiding the poor ride characteristics and frame rub that can result from a true but off-centre wheelFits wheels from 24 inches - 29 inches in diameter including 700C road wheelsDisassembles quickly for storage or travel
Key Features: A great way to keep the benchtop organized during a repair, the OM-2 features an oversized textured work area and raised trays for organizing small parts and hardware,Perfect for overhauling or rebuilding components such as forks, shocks, hubs, suspension linkages, derailleurs, etc.
A great place to keep small parts, cable end caps, grease, and whatever else you can think ofHelps keep track of all those bits that you always need in a hurryStainless steel construction with a clear acrylic hinged top and four removable binsDimensions: 12 x 5.5 x 3.5 inches (30.5 x 14 x 9 cm).
Key Features:A great shop accessory made to hold a wide variety of axles, spindles and Park Tool freewheel remover and lockring tools,Made from precision extruded aluminium, the inserts incorporate retainer legs and magnets that make for easy bench vice use,Features the following jaw openings: 5, 9, 10, 12, 14, 20, 25, 30, 36 mm, plus a mini V-block and a 1 inch hex,Aluminium jaws prevent you from damaging ultra fine axle threads,Bridge springs keep the jaws properly aligned and allow the tool to open automatically when the vice is opened,Made in the USA and covered by Park's legendary limited lifetime warranty.
Park Tool Chain Tool (CT3.3)A tough, workshop-level bike chain tool that’s fits nicely in the hand and is simple to operate, Park Tool has made its CT3.3 model with a hard-wearing investment cast steel. It’s suitable for use with all single and multi-speed chains, including modern SRAM 12-Speed and Campagnolo 13-Speed types. Certain to become your go-to tool for changing and repairing chains, this versatile tool has a replaceable pin, making it ideal for busy bike mechanics.Features:Comfortable T-handle Replaceable driving pin (replacement pins sold separately - Park Tool part number: CTP-C) Investment cast steel body Adjustable locating shelf Compatible with all 5 to 13-Speed chains, single speed 1/8", 3/16", and half link chains Please Note: The CT-3.3 will install, but not peen (flatten), Campagnolo 11, 12 and 13-speed chain rivets.Please Also Note: The shelf fastener sizing is preset to allow easy adjustment from one width chain to another - any attempt to lock the shelf in place will result in damage to the tool. Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: The HCW-16.3 is a combination 15mm pedal wrench and chain whip,Use for both pedal removal/installation and for cassette removal,Chain whip features improved compatibility with 5 speed to 12 speed mountain and road bike cassettes and freewheels,The HCW-16.3 is 10.75" long (27.3cm).
Key Features: Shop quality, preset torque driver that limits torque applied to fasteners, preventing overtightening and damage to lightweight components, Preset to apply 4 Newton Meter (Nm) of torque when rotating clockwise, All metal internal construction for long life, Comfortable ergonomic composite moulded grip, Includes 3mm, 4mm, 5mm and T25 bits (stored in handle), 1 1/4 inch drive, Magnetic socket retains bits, Assembled and calibrated at the PARK TOOL factory in St. Paul, Minnesota.
The Park Tool Chain Gang chain cleaning system contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. It contains a CM-5.3 Cyclone Chain Scrubber, GSC-1 GearClean Brush and 8 oz. bottle of Bio ChainBrite.
Park Tool Chain Gang Cleaning System (CG-2.4)Keeping your bike drivetrain clean is a breeze thanks to this Chain Gang Cleaning System from Park Tool. This dynamic set includes all the tools you'll need to quickly clean your bike’s chain, freewheel/cassette cogs, and chainrings for a smoother ride every time.Features:The CG-2.4 works on all derailleur bikes and many 3-speed, single-speed, coaster brake bikes, and electric bikes (E-Bikes)Includes:CM-5.3 Cyclone Chain ScrubberGSC-1 GearClean Brush8 oz. bottle of Bio ChainBriteBuy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fastenersKey Features:Ergonomic, CNC machined and hard anodized 6061 aluminum handle,Cross tip (#2 Phillips) driver built to exceed JIS standards,Covered by Park Tool's legendary limited lifetime warranty.
Park Tool Professional Pedal Wrench (PW-4)A workshop-quality bike tool that’s ready for daily use, the PW-4 Professional Pedal Wrench is tough, versatile and easy to use. To give you two ideal starting angles, Park Tool has included two cut-outs, one at 30° and one at 45°. This design gives you the advantage you need for removing stubborn pedals that have made themselves at home in the crank arm.Durable Bike Tool with Comfortable HandleAn oversized, asymmetrical head is made from investment-cast chromoly (CrMo) steel for superior strength and durability. Although this pedal spanner is very strong, the PW-4 is still thin enough to access all wrench flats. An extra-long 14" handle provides the leverage to remove even the tightest pedals and as the handle is round and vinyl-dipped, it won't dig into your hand like flat wrenches.Features:Two 15mm wrench openings at 30° and 45° angles for best mechanical advantage, regardless of pedal positionRound vinyl dipped handle won't dig into the hand like flat wrenchesExtra-long 14" handle provides the leverage to remove even the tightest pedalsBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.