Park Tool Benchtop Overhaul Mat (OM-1)Designed for arranging parts in the workshop, this Benchtop Overhaul Mat from Park Tool benefits from one work area alongside seven pockets, ideal for storing small parts and tools. Features:Material: Made from a rubber-like PVC7 compartments for small partsCleans easily and looks great on any benchDimensions: 38cm x 18cmPlease Note: Parts shown are for illustration purposes only.Buy Park Tool Bench-Top Overhaul Mat - OM-1 from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool 750 Centering Cone Adaptor adapts the centering cone on HTR-1 for use on low profile , integrated and OnePointFive (1.5 inch) headsets. The HTR-1 must have the correct cutting tool and pilot for the corresponding standard.
A great way to hold small parts, tools and components during a repair, the OM-1 features multiple small pockets and one large work area. Perfect for suspension work or to organize parts for installation.
Key Features: The 750.2 Centring cone adapter increases the size of the centering cone of the HTR-1 Head tube Reaming and Facing Set,Fits headtubes with an inside diameter of 38-60mm,Several headset standards use large head tube inside diameters,The 750.2 will allow the HTR-1 to be used with the IS (intergrated headset cups) and the OnePointFive (1.5 inch) headset standard,The HTR-1 must have the correct cutting tool and pilot for the corresponding standard.
A highly durable metal tool to remove and install Shimano HollowTech 2 integrated Bottom brackets and chainsets16 Laser cut splines securely engage the notches of the bottom bracket cups while the other end fits the 8 internal splines of the crank arm adjustment capPlastic coated handle for a secure and comfortable gripWarning: this tool has a long handle and it is possible to damage the tool or the component by overtightening during installationRecommended torquesetting for bottom bracket cups: 35 - 50 NmRecommended torque setting for crank arm adjustment cap: 0.4 - 0.7 Nm
A high quality Bottom Bracket Tool from Park Tool. A precision CNC-machined aluminium tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including Chris King ThreadFit T47 & ThreadFit 30 bottom brackets.Manufactured in-house by Park Tool, anodized for easy identification, and featuring a ratchet/torque wrench-compatible 3/8" driveFits 12-notch bottom bracket tool fittings with a major diameter of 50-53mm and a minor diameter of 48.2mm, including:BB Infinite T47Chris King ThreadFit T47Chris King ThreadFit 30Enduro BBRight TorqtiteHambini T47Rotor T47 External 30mmRotor BBRight, BB30, BB386EVO, and PF30 thread-together
A high quality Bottom Bracket Tool from Park Tool. A precision CNC-machined aluminium tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Enduro T47 & PF30 bottom brackets.Manufactured in-house by Park Tool, anodized for easy identification, and featuring a ratchet/torque wrench-compatible 3/8" driveFits 16-notch bottom bracket tool fittings with a major diameter of 52-54mm and a minor diameter of 48.8mm, including:CeramicSpeed T47/86Enduro T47 (30mm and DUB spindles)Enduro BB30/30a TorqTite (30mm and DUB spindles)Kogel T47SRAM T47 DUBWhite Industries T47White Industries PF30 Thread-Together
The Park Tool FR8C Freewheel Remover is a heat treated alloy steel product with a one inch base to fit wrenches or a bench vice. Thin wall construction allows use without removal of cones and locknuts and removes four notch freewheels from flip-flop BMX hubs with 30 x 1mm threads.
The perfect workshop hammer!Fiberglass shaft with soft touch rubber gripA unique two-sided head with both steel and replaceable plastic striking surfaces: ideal to tackle any jobCovered by Park Tool's legendary limited lifetime warranty
The Park Tool LRT-3 is designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized, Cannondale and FSA modular cranks.Fits chainring of Specialized, Cannondale and FSAFor lockrings with 47 48mm outside diameter and 4 or 8 notchesFits both 4 notch (FSA and Cannondale) and 8 notch (Specialized) lockrings36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torqueConstructed of 4140 heat treated steel and plated for long life
The Park Tool LRT-4 is designed and built to remove and install Shimano direct mount chainring lockrings found on XTR 9120, XT 8120, MT900 and other Shimano direct mount systems. Precisely CNC machined from 6061 aluminium for a perfect fit and to prevent marring expensive parts.Machined flat face for optimal lockring engagementFor lockrings with 41mm outside diameter and 16 notches36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque6061 aluminium construction
A complete take-along trail tool featuring I-Beam technology which is strong compact and lightweight Features a full complement of emergency tools: 1.5 2 2.5 3 4 5 6 8mm hex wrenches T25 star shaped wrench flat blade screwdriver tyre lever with two integral spoke wrenches and a 10-speed compatible chain tool. A portable trail side multi-tool designed to get you out of trouble and back on the bike. Covered by Park Tool's legendary limited lifetime warranty
Workshop hacksaw with all aluminium die cast frame constructionFeatures blade tension adjuster and comfortable handle to make this the perfect hacksaw for the professional workshop or home mechanicAccepts any 12 inch (300 mm) hacksaw bladeTool supplied with one blade
Park Tool Heavy Duty Steel Tyre Lever Set TL-5The TL-5 Heavy Duty Tire Lever Set is designed for use on the toughest tire and rim combinations. Made of forged steel, these beefy levers are a full 8" (20.3cm) long for superior leverage. Specially designed tip engages tire bead so it can be removed with just two levers. Ideal for difficult to remove downhill and freestyle tires. Set of two.Buy Park Tool Heavy Duty Steel Tyre Lever from Chain Reaction Cycles, the World's Largest Online Bike Store.
Part of a range of combination Headset wrenches that cover all bicycle requirementsThe Y-head design puts metal where it is needed for strength and durabilityThe laser-cut openings are a precise fit, as this operation takes place after the heat treatment processFeatures a 32 mm wrench for 1 inch Headsets, and 36 mm wrench for 1-1/8 inch Headsets
The Park Tool utility pick set features 1-straight, 1-hook and 1-90 degree pick that are ideal for a wide variety of detail work. The picks feature an aluminium handle with magnet and replaceable picks which are made form cold formed, heat treated and polished high carbon steel.
Easily storable in your kit bag or attached to your water bottle cage via the bundled mounting hardware for maximum portability, this Presta and Schrader valve compatible pump is a great looking and top performing mini inflator. The all-aluminium barrel construction guarantees durability and is designed for a lifetime of use and top performance. With a maximum inflating pressure of 90psi and weighing just 130 grams, the Mini Pump PMP-4.2 offers quality inflation from a compact and comfortable device.
With most manufacturers recommending replacing your chain at 0.75% stretch, the Park Tool chain checker will quickly and precisely let you know if you are over or under. As overworn chains can cause poor shifting and uneven drivetrain wear, having an accurate gauge to hand won't just save your chain, but can also save the full functionality of your bike. Reading wear from 0.25% to 1%, the CC-2 is compatible with 9/10/11-Speed chains and measures the stretch by simply inserting the pins between two links and pressing the swing-arm gauge tight to read your accurate reading in the gauge window. (Note: For 9/10-speed chains, replace the chain at or before the 0.75% reading, and for 11/12-speeds, replace before the 0.5% reading. Always check with the manufacturer for any specific replacement instructions and recommendations.)
Park Tool Chain Checker CC-2Quickly and accurately measure the wear and stretch of your bicycle chain with this chain checker from Park Tool. Check if your chain suffers from an uneven drivetrain or poor shifting quality so you can maximise your performance output. To use simply insert the Chain Checker's pins into two links, press the swingarm gauge tight, and then check the gauge window for an accurate reading.Features:Compatibility: 9/10/11Reads wear from 0.25% to 1%9/10-speed chains - replace at or just before the 0.75% readings11-speed chain, replace at or just before the 0.5% readingBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Covered by Park Tool's legendary limited lifetime warranty