The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitment EW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapter EW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cables Reliable and secure water resistant connectors
The Shimano SM-RT64 Deore Disc Rotor is constructed form precision cut stainless steel braking surface that improves pad clearance whilst aiding cooling under high load. An alloy spider supports rotor surface, increasing rigidity and reducing weight and it comes complete with a steel lockring.Shimano SM-RT64 rotors offer secure and easy set-up with the proven Centre-Lock mounting systemPrecision cut stainless steel braking surface improves pad clearing in muddy conditions while aiding cooling under high loadRotor contact surface has been developed for excellent pad clearing and cooling which increases pad performance and lifeAlloy spider supports rotor surface, increasing rigidity and reducing weightComes complete with steel lockringAverage weight for 160mm rotor with lockring is 153 grams
The Shimano SM-RT64 Deore Disc Rotor is constructed form precision cut stainless steel braking surface that improves pad clearance whilst aiding cooling under high load. An alloy spider supports rotor surface, increasing rigidity and reducing weight and it comes complete with a steel lockring.Shimano SM-RT64 rotors offer secure and easy set-up with the proven Centre-Lock mounting systemPrecision cut stainless steel braking surface improves pad clearing in muddy conditions while aiding cooling under high loadRotor contact surface has been developed for excellent pad clearing and cooling which increases pad performance and lifeAlloy spider supports rotor surface, increasing rigidity and reducing weightComes complete with steel lockringAverage weight for 160mm rotor with lockring is 153 grams
The 105 R7000 Front Derailleur features an optimised, easy to shift, smooth power-stroke. This provides a very natural and easy to activate shifting feel and lighter mechanism actuation; it feels very easy to shift across chainrings. 2 x 11 SpeedMaterial: Clamp: Aluminium; Plate: SteelChain Line: 43.5mmWeight: 95gThanks to the enhanced design, Shimano has designed this front derailleur so that it is compatible with most cable routing options on the market; it also comes complete with a, integrated cable tension adjustment screw to ensure excellent adjustability and convenience when fine-tuning. This is a popular choice for cyclists who are chasing reliability and performance at a wallet friendly price.
Key Features:The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but gives effortless gear shifts,E-tube Di2 uses a fully removable individual cable system from the battery indicator junction box enabling fine tuning with the correct cable length to each component for easy and tidy fitment,EW-SD50 wires are required to connect the junction (either SM-JC40 external or SM-JC41 internal to the rear mech, front mech, battery and to the handlebar battery indicator junction box,EW-SD50 individual wires are available in varying lengths, there is no need (or facility) to cut these cables,Reliable and secure water resistant connectors.
The Shimano SM-RT64 disc brake rotors offer secure and easy set-up using the proven Centre-Lock system. These brake discs are ideally suited to Shimano SLX and Deore disc brake systems. They have a precision cut stainless steel braking surface which improves pad clearing in muddy conditions while aiding cooling under high load, increasing pad performance and life. The alloy spider supports the rotor surface, increasing rigidity and reducing weight.
Shimano Acera M360 7/8sp Rear DerailleurThe Shimano Acera M360 7/8-Speed Rear Mech offers precise shifting and over-size pulleys for a wide gear choice. This rear mountain bike derailleur is compatible with 7 and 8-speed drivetrains and the included extension spring and low-friction fluorine-coated link pivot bushing result in a light shifting action.Features: Speed: 7 and 8-speed compatible Cage Type: Long cage Mounting: Conventional Clutch Option: No Compatibility: Mountain bikes and City bikes with Shimano 7 or 8 speed flat bar shifters Oversize 13-tooth tension and guide pulleys to reduce noise and wear Extension spring and low-friction fluorine-coated link pivot bushing result in a light shifting action Top normal spring for use with RapidFire shifters Recommended Chains: IG (Interglide) and HG (Hyperglide) chain For use with 28 to 34 tooth low rear sprockets Capacity: 43 teeth Weight: 340g (approx)A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Tool for removing and tightening lock rings. Fits Centre-Lock Disc rotors and HG cassettes Large internal diameter will fit over all axle locknuts Can be used with 3/4 inch drive torque wrench or ratchet driver
Key Features:Tool for removing and tightening lock ringsFits Centre-Lock Disc rotors and HG cassettesLarge internal diameter will fit over all axle locknutsCan be used with 3/4 inch drive torque wrench or ratchet driver
When you convert over to Di2 gearing it is more then just your gearing which you are changing over, it is your whole style of riding. Before you get on your bike however you will need to connect all those cables up and this is exactly what the EW-SD50 electric wires are for. The cables are fully removable and allow you to get the correct lengths of cable to run between the indicator junction box or wireless units. The cables are fully water resistant and can be routed through the frame.
When you convert over to Di2 gearing it is more then just your gearing which you are changing over, it is your whole style of riding. Before you get on your bike however you will need to connect all those cables up and this is exactly what the EW-SD50 electric wires are for. The cables are fully removable and allow you to get the correct lengths of cable to run between the indicator junction box or wireless units. The cables are fully water resistant and can be routed through the frame.
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
When you convert over to Di2 gearing it is more then just your gearing which you are changing over, it is your whole style of riding. Before you get on your bike however you will need to connect all those cables up and this is exactly what the EW-SD50 electric wires are for. The cables are fully removable and allow you to get the correct lengths of cable to run between the indicator junction box or wireless units. The cables are fully water resistant and can be routed through the frame.
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
When you convert over to Di2 gearing it is more then just your gearing which you are changing over, it is your whole style of riding. Before you get on your bike however you will need to connect all those cables up and this is exactly what the EW-SD50 electric wires are for. The cables are fully removable and allow you to get the correct lengths of cable to run between the indicator junction box or wireless units. The cables are fully water resistant and can be routed through the frame.
Features:SMRT76 rotors give excellent performance using the 6-bolt mounting systemPrecision cut stainless steel braking surface improves pad clearing in muddy conditions while aiding cooling under high loadRotor contact surface has been developed for excellent pad clearing and cooling which increases pad performance and lifeLarge forged alloy spider supports rotor surface, increasing rigidity and reducing weightComes complete with mounting hardwareAverage weight for 160 mm rotor is 138 grams
Key Features:Premium replacement resin coated hydraulic brake hose,Engineered for use with Shimano straight connect disc brake levers to banjo connect callipers,2.3 mm bore brass insert and olive included,Easily cuttable to fit - comes complete with cutting tool.
The Ultegra CN-6701 10 speed bicycle chain is a narrow, lightweight directional chain engineered to offer optimal cassette and chainset interaction and maximum power transfer for a greater cycling performance. The outer plate has been developed to reduce the chance of chain suck while the inner plate is designed to give better, more efficient contact with gears for smoother shifting under high loads, enhanced rigidity and almost silent operation. – L.R. Features: Shimano Ultegra CN-6701 10 Speed Bicycle Chain Premium quality build with a slim, lightweight design for maximum power transfer Chain uses a directional design with specifically shaped inner and outer plates The inner plate has been developed for better contact with gears Supplied with Shimano joining pin Chain width: 5.88mm Chain type: Super Narrow HG for 10-speed cassette compatibility minimum of 114 links Weight: 267g (Manufacturer claimed).
The M6100 chain provides smooth shifting and enhanced chain retention thanks to an extended portion of the inner plate. The new chain features quick-link assembly and is optimised for Hyperglide+ cassettes and dynamic chain engagement+ chainrings.Deore M6100 12-speed Hyperglide+ chain for smooth shifts and maximum durabilityShimano 12-speed Hyperglide+ chains have computer designed plate profiles to operate seamlessly with Shimano DCE 12-speed chainrings and cassette sprockets, resulting in 1/3 faster shift time than Hyperglide systems even under loadOuter plate design has been developed to reduce the chance of chain suckFor use with 12-speed HG+ drivetrainsComes complete with Quick Link which enables fast tool free chain assembly