3D anatomic design with 3-layer fabric with Windbreak membrane for protection from wind and cold Convenient slip-on design 3D Anatomic pattern and fit for comfort and bike control Windbreak fabric with thin interior lining Non-slip silicon palm print for grip and control Reflective elements for low-light visibility Touchscreen compatible
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitment EW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapter EW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cables Reliable and secure water resistant connectors
Shimano Road SIL-TEC PTFE Brake Cable SetThis essential Brake Cable Set from Shimano ticks all the boxes. Suitable for Shimano Dura-Ace 7900 and Ultegra 6700 brakesets, it's the ideal set to have in your workshop.Set Includes:1.6mm PTFE inner wires (1 x 1000mm and 1 x 2050mm)5mm outer casing for a complete bike (1 x 800mm and 1 x 1400mm)All end capsFeatures:Use: Road, Time Trial, Touring, CyclocrossDie-extruded PTFE coated inner wire leaves a smooth surface for low friction in use, and stainless steel provides smooth shifting and higher corrosion resistanceOuter casing is lined with a polymer sheath to assist with the smooth operation of the inner wireA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Mountain Bike Brake Cable SetEnjoy a smoother shifting experience with this Mountain Bike Brake Cable Set from Shimano. This set includes everything you need to set up your brakes and is suitable for the top-of-the-range Shimano XTR mountain bike brake set.Features:Material: Stainless steel ground inner wires provide smooth shifting and higher corrosion resistanceSet Includes: 1.6mm inner wires (1 x 1000mm and 1 x 2050mm), and black 5mm M-System outer casing for a complete bike (1 x 2200mm), and all end capsSealed end caps with internal O-ring gives an effective seal against the elements, prolonging service lifeThe outer casing is lined with a polymer sheath to assist with the smooth operation of the inner wireA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E-Tube is Shimano's “service” that uses websites or apps to maximize the enjoyment of riding a bicycle by connecting the riders, the bicycles and Shimano. Shimano's genuine application E-Tube Project for Mobile allows you to customize your bike, update firmware, and maintain it by connecting it wirelessly to your bike. You can also get more detailed bike maintenance by connecting to your bike by wire with E-Tube Project via the Windows V4 application.
Key Features:The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but gives effortless gear shifts.E-tube Di2 uses a fully removable individual cable system from the battery indicator junction box enabling fine tuning with the correct cable length to each component for easy and tidy fitment.EW-SD50 wires are required to connect the junction (either SM-JC40 external or SM-JC41 internal to the rear mech, front mech, battery and to the handlebar battery indicator junction box.EW-SD50 individual wires are available in varying lengths, there is no need (or facility) to cut these cables.Reliable and secure water resistant connectors.
Key Features:Alfine chain tensioner for use with vertical dropoutsStable chain tension is achieved by using a single pulley guideFor use with single front chainringFor use with 16-23T rear sprockets.
Includes 1.6mm inner wires (1 x 1000mm and 1 x 2050mm), and black 5mm M-System outer casing for a complete bike (1 x 2200mm), and all end caps Sealed end caps with internal O-ring gives an effective seal against the elements, prolonging service life Outer casing is lined with a polymer sheath to assist with the smooth operation of the inner wire
Shimano H03C Metal Disc Brake PadsThese Metal Disc Brake Pads from Shimano feature ICE-Technology offering exceptional brake pad cooling preventing your brakes from overheating for a smooth and reliable performance. Metal Pad Features:Metal pads consistently perform well in dry or wet conditions and have excellent power and durability.Radiator Fin - provides long pad life and less fade by cooling technologyRigid compoundLonger services lifeHigh power in severe conditionsDesign for muddy and sandy conditionsResin Pad Features:Resin pads make less noise than metal pads and offer better modulation.Radiator Fin - provides long pad life and less fade by cooling technologyFlexible compoundLess noiseFocus on controllable performanceDesigned for dry and wet conditionsCompatible with the following Shimano Models:BR-M820BR-M640A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Altus mountain bike rear derailleur with light action operation and over-size pulleys for a wide gear choice,Oversize 13/15-tooth tension and guide pulleys to reduce noise and wear,Extension spring and low-friction fluorine-coated link pivot bushing result in a light shifting action,Top normal spring for use with Rapidfire shifters,IG and HG chain, 7- and 8-speed compatible,For use with 28 to 34 tooth low rear sprockets, total capacity 43 teeth.
Shimano Dura-Ace-Ultegra-105 Carbon Brake PadsEnjoy unrivalled braking performance with these Shimano Carbon Brake Pads. For use with carbon rims, they are suitable for standard, direct mount caliper brakes and cantilever brakes. Ideal for precise braking control with your Shimano brake system, they ensure high stopping power for a controlled performance you can count on.Features:Use: Mountain Bike (MTB), Road, Touring, Cyclocross, Commuters, Time Trial, TouringBrake Type: V-BrakeBrake Calipers: NoHow Many Pads Included: PairCompound: Carbon RimCompatible with the following Shimano Models: BR-9000, BR-9010, BR-7900, BR-7800, BR-7700, BR-6800, BR-6810, BR-6700, BR-6600, BR-6500, BR-5800, BR-5810, BR-5700, BR-5600, BR-5501, BR-5500, BR-R650, BR-R600, BR-R561, BR-R560, BR-CX70A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Dura-Ace-Ultegra-105 Carbon Brake PadsEnjoy unrivalled braking performance with these Shimano Carbon Brake Pads. For use with carbon rims, they are suitable for standard, direct mount caliper brakes and cantilever brakes. Ideal for precise braking control with your Shimano brake system, they ensure high stopping power for a controlled performance you can count on.Features:Use: Mountain Bike (MTB), Road, Touring, Cyclocross, Commuters, Time Trial, TouringBrake Type: V-BrakeBrake Calipers: NoHow Many Pads Included: PairCompound: Carbon RimCompatible with the following Shimano Models: BR-9000, BR-9010, BR-7900, BR-7800, BR-7700, BR-6800, BR-6810, BR-6700, BR-6600, BR-6500, BR-5800, BR-5810, BR-5700, BR-5600, BR-5501, BR-5500, BR-R650, BR-R600, BR-R561, BR-R560, BR-CX70A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Premium replacement resin coated hydraulic brake hose.,Engineered for use with Shimano straight connect lever and calliper hydraulic disc brake system.,Uses tapered insert for compatibility with J-Kit and standard brakes,2.3 mm bore brass insert and olive included.,Comes with two removable in-line fittings.,Easily cuttable to fit - comes complete with cutting tool..
This Shimano EW-SD50 cable is required to connect the junction (either SM-JC40 external or SM-JC41 internal) to the shifters, rear derailleur, front derailleur, battery and to the handlebar battery indicator junction box. In an Ultegra Di2 system, there is a fully removable individual Shimano SD50 E-Tube cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitment. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching but provides effortless gear shifts. Compatibility: E-Tube wires are compatible with 6770 Ultegra 10-Speed Di2, 6870 Ultegra 11-Speed Di2, 9070 Dura Ace 11-Speed and all modern Shimano Di2 components that use the E-Tube connections.
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates corrosion and stretching but provides effortless gear shiftsE-tube Di2 uses a fully removable individual cable system from the battery indicator junction box enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD50 wires are required to connect the junction (either SM-JC40 external or SM-JC41 internal to the rear mech front mech battery and to the handlebar battery indicator junction boxEW-SD50 individual wires are available in varying lengths there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Key Features:Shimano TLFC34 crank Adaptor Installation tool for Impact wrenchFor use with all HollowTech II bottom brackets.
Boasting a compact and lightweight design, the Shimano M520 SPD Pedals have a sealed cartridge bearing spindle to keep out water and mud, allowing for smooth action and complete durability. With a pop up surrounding cage for added stability, they also come supplied with cleats. - L.M. Features: Shimano M520 SPD Pedals Compact and lightweight design Sealed cartridge bearing spindle to keep out water and mud Produce a smooth action Durable forged alloy body Pop up surrounding cage for added stability Supplied with cleats Weight: 380g per pair
Acera mountain bike rear derailleur with light action operation and over-size pulleys for a wide gear choiceThe Features of the Shimano Acera 8 Speed Rear Mech RDM360 are:Oversize 13-tooth tension and guide pulleys to reduce noise and wearExtension spring and low-friction fluorine-coated link pivot bushing result in a light shifting actionTop normal spring for use with Rapidfire shiftersIG and HG chain, 7- and 8-speed compatibleFor use with 28 to 34 tooth low rear sprockets, total capacity 43 teeth
PROFESSIONAL-GRADE MERINO SOCKS Features: All-season racing socks system-engineered to perform in tandem with S-PHYRE shoes Mid-calf height layers well with tights Merino wool blend absorbs moisture to keep feet comfortable Thinly knit sole directly transfers power Durable anti-slip knitted heel Materials: 51% Wool 36% Polyester 11% Polyamide 2% Elastane
Shimano XT M8025 E2-Type 2x11 Front DerailleurTraditional down/top pull routing. Increased traction range for long-travel and active rear suspension. Features: Swing Action: Side Swing Cassette Compatibility: 11 Maximum Capacity: Total capacity 10T Top Gear Teeth: 34-38T Cable Routing: Dual-Pull, Top-Pull exclusive Chain Line: 48.8mm (Compatible with the special crankset which chain line is 3mm outboard. The special frame is required) Chainstay Angle: 66-69°A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.