Alloy Quill adaptor for mounting an A-Head style stem with the older threaded fork and headset. 150mm 22.2 - 28.6 (1" - 1.1/8") - Designed for a 1" threaded steerer 150mm 25.4 - 28.6 (1" - 1.1/8") - Designed for a 1 1/8" threaded steerer
Standard radial bearings use 14 balls, whereas Brand-X has squeezed the maximum number of 25 balls into each PLUS bearing. This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
The head features a micro adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.
Building on the success of the original Ascend, Brand- X now offer an externally routed cable-operated option with the Ascend II. The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing. It comes with an ergonomic lever that can be left or right hand mounted depending on your preference. The cable is actuated from the mid cap ensuring zero cable movement. The Ascend Dropper mechanical cable-operated seatpost sets new standards for reliability and performance at a fantastic price point. Please Note: The 27.2 option comes with the 2/3x Paddle Lever. The 27.2mm size also has a 2-piece saddle clamp so the saddle will sit slightly higher than on the 31.6 and 30.9mm options. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 27.2mm x 390mm 105mm 90 128 31.6mm x 400mm 125mm 90 128 30.9mm x 400mm 125mm 90 128 31.6mm x 449mm 150mm 90 128 30.9mm x 449mm 150mm 90 128 Service Guide Information Click here to view the Brand-X Ascend II 105, 125 External Route Dropper Post Service Guide. Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide.
Designed for use with the common 31.8mm handlebar diameter, the Brand-X MTB Stem features a flip/flop design. This enables you to mount it in a comfortable upright position or a lower position for ultimate control. This alternative lower position makes it ideal for use on bikes with 27.5” (650b) or 29” wheels that have a higher front end.
Designed for use with the now common 31.8mm handlebar size, you can mount the Brand-X Road stem two ways. You can mount it in its relaxed 7-degree rise for a comfortable endurance position, or flip it over and mount it upside down to obtain a lower, more aerodynamic race position. It’s finished with subtle styling and an anodised coating, meaning it will compliment any bike.
Designed for use with the common 31.8mm bar thickness, you can install the Enduro stem in two ways. Run it in its standard upright position for a more relaxed ride, or flip it over and run it the other way for a more aggressive position. This lower option makes it ideal for use with modern MTB’s larger 27.5” or 29” wheels.
With its female-specific shape, waterproof cover and flexible rails, Brand-X has ensured the comfort saddle provides consistent comfort in all weather conditions and over varying terrains. Subtle styling and black components ensure this saddle will suit any city or trekking bike.
Standard radial bearings use 14 balls, whereas Brand-X has squeezed the maximum number of 25 balls into each PLUS bearing. This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
The Brand-X RD-01 The Brand-X RD-01 is a solid performer, which combines lightness, durability, adaptability and affordability. Equally at home on long winter training rides or daily commutes to the office, the lightweight 6061-T6 alloy frame has been designed with all year riding and commuting in mind. Carbon Comfort A UD carbon bladed fork with alloy steerer reduces buzz from rough sections of road, for increased rider comfort. There is ample clearance for mudguards and features eyelets for ease of fitment on the frame and it also features rear pannier rack mounts, which broaden the RD-01's capabilities as an all-rounder for commuting and social riding. Please Note: The Brand-X RD-01 Road Bike Frameset requires a long reach brake caliper (47mm - 59mm). Shimano R650, Shimano R451, Tektro R317and Tektro R359 calipers are all fully compatible and recommended for use with this frame. Prepared and Quality Checked Each Frame is fully prepared and quality checked by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition.
Standard radial bearings use 14 balls, whereas Brand-X has squeezed the maximum number of 25 balls into each PLUS bearing. This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
Precision engineered from SUJ2 Steel for high strength and durability.
Unlike the standard bolt-thru axle, this version has an easy to use solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can engaged/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 125mm 17mm M12x1.5 60g 2 E-Thru 12x142mm 166mm 17mm M12x1.5 73g 3 E-Thru 12x142mm 170mm 17mm M12x1.5 75g 4 SRAM 12x142mm 172mm 20mm M12x1.75 70g 5 SRAM 12x148mm 180mm 20mm M12x1.75 78g 6 RockShox 15x100mm 146mm 11mm M15x1.5 92g 7 RockShox 15x110mm 158mm 11mm M15x1.5 98g 8 Fox Kabolt 15x100mm 146mm 13mm M14x1.5 91g 9 Fox Kabolt 15x110mm 156mm 13mm M14x1.5 96g (*We recommend measuring the length of your existing thru axle before ordering) Compatibility Notes: Option 1 is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch. Options 2 and 3 are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts. Option 4 is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru axle with the M12x1.75 thread pitch. Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru axle with the M12x1.75 thread pitch. Option 6 is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch. Option 7 is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch. Option 8 is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch. Option 9 is for Fox Suspension forks with the Boost 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.
Strong, stiff and durable, this post is built to last. It also has a micro-adjustable 2-bolt clamp head that makes saddle installation easy and helps you to find the correct angle quickly. Available in a range of sizes to suit various frame's seat tube sizes, it has a stealthy black anodised finish with incremental markings to assist with setting saddle height. Options Explained: 350mm 27.2mm: 350mm long post with a 27.2mm diameter 350mm 30.9mm: 350mm long post with a 30.9mm diameter 350mm 31.6mm: 350mm long post with a 31.6mm diameter
Featuring a leverless design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 125mm 17mm M12x1.5 31g 2 E-Thru 12x142mm 166mm 17mm M12x1.5 40g 3 E-Thru 12x142mm 170mm 17mm M12x1.5 42g 4 SRAM 12x142mm 172mm 20mm M12x1.75 42g 5 SRAM 12x148mm 180mm 20mm M12x1.75 43g 6 RockShox 15x100mm 146mm 11mm M15x1.5 65g 7 RockShox 15x110mm 158mm 11mm M15x1.5 69g 8 Fox Kabolt 15x100mm 146mm 13mm M14x1.5 63g 9 Fox Kabolt 15x110mm 156mm 13mm M14x1.5 67g (*We recommend measuring the length of your existing thru axle before ordering) Compatibility Notes: Option 1 is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch. Options 2 and 3 are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts. Option 4 is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru axle with the M12x1.75 thread pitch. Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru axle with the M12x1.75 thread pitch. Option 6 is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch. Option 7 is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch. Option 8 is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch. Option 9 is for Fox Suspension forks with the Boost Standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.
Stealth Finish Manufactured for strength, stiffness and durability, this light and strong seatpost has a black anodised finish for an understated and stealthy appearance. It also features incremental markings to help you set your saddle height easily. Options Explained: 400mm 26.4mm: 350mm long post with a 26.4mm diameter 400mm 26.8mm: 350mm long post with a 26.8mm diameter 400mm 27.0mm: 350mm long post with a 27.0mm diameter 400mm 27.2mm: 350mm long post with a 27.2mm diameter 400mm 30.9mm: 350mm long post with a 30.9mm diameter 400mm 31.6mm: 350mm long post with a 31.6mm diameter