The Hope Pro 4 Rear Hub provides unsurpassed reliability and it's exceptionally durable. Machined from a single aluminium billet and finished with easily serviceable sealed stainless steel cartridge bearings; this disc brake compatible mountain bike (MTB) hub will last a lot longer than most high-end models from other brands. Durability, reliability and performance are qualities assured by Hope design; they are able to handle the growing demands of modern mountain bike riding, trails and obstacles. The Hope Pro 4 Rear Hub 12x135 version is also very easy to service and requires no proprietary tools, making maintenance simple. From its very first Ti-glide hubs launched back in 1993, Hope has had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstay of this reputation has been its attention to detail in both the bearings it uses and its inspection processes. All bearings are from world-renowned manufacturers to ensure the highest quality. Also every hub shell, freehub and axle are produced in Hope's Barnoldswick factory and checked and inspected to the highest degree.
Power Switch Built for super dark lighting conditions Hope have incorporated a backlit LED power button. This makes finding and using the power button in the dark easier than ever. You can use the button to toggle through different power modes dependent on your battery life or current environment’s lighting conditions. Mounting System The R4+ comes with an integrated mounting system. Included with the light is three different forms of attachment: handlebar mount, helmet mount and head harness. This allows you to use the light in multiple different ways on and off the bike.
Hope’s R8 Vision LED Front Light is easily attached to your bike’s frame with a quick-bayonet fitting handlebar mount and easily connected, rugged battery pack. The light utilises eight Cree XP-G2 LEDs which spread the light output and provide a wide beam of light output allowing you to see every detail of your surroundings. The light comes with 6 different light modes, providing different power outages, with a large volume battery pack that provides up to 2 hours of battery life in full power mode.
The Race Face AR Plus rim is laced to Hope's Pro 4 Hub to bring you an exclusive MTB wheel ideal for cross country (XC), trail, enduro and downhill (DH) mountain bike riding. The Hope Pro 4 hub is also convertible to suit most modern axle standards and the Race Face rim's 40mm internal width means it's compatible with plus-sized off-road tyres. Hope Pro 4 MTB Front Hub The Hope Pro 4 hub builds upon their Pro 2 EVO hub and offers superb attention to detail, excellent rolling performance and thanks to the 4 pawl ratchet, a 10% quicker engagement. A highly durable, beautiful looking hub from Hope. From Hope's very first Ti-glide hubs launched back in 1993, they have had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstay of this reputation has been their attention to detail in both the bearings they use and their inspection processes. All the bearings used are from world-renowned manufacturers to ensure the highest quality. Also, every hub shell, freehub and internal axle are produced in their Barnoldswick factory and checked and inspected to the highest degree. Hub Features: Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Bearing Type: Sealed Stainless Steel cartridge bearings Front Boost Hub flanges are moved outboard 5mm compared to the standard non-boost front hub to increase wheel stiffness Axle Compatibility: Multiple Axle and Hub Spacing Options, see selection menu Spoke count: 32 hole Weight: 110mm Non-Boost: 187g; 110mm Boost: 188g Race Face AR Plus Rim Engineered to roll with stability and pace over the most demanding terrains, this robust and reliable AR Plus MTB Rim boasts an impressive 40mm width that ensures you get the perfect tyre profile when using Plus tyres. Plus, this rim is tubeless-ready and versatile for everything from cross country (XC), trail, enduro and downhill riding. Rim Features: Rim Material: Aluminium Use: XC, Trail, Enduro, Downhill Internal Rim Width: 40mm External Rim Width: 44mm Spoke Holes: 32 Tubeless Ready: Yes Weight: 595g Please Note: there are multiple front hub options for these wheels via the selection menu at the top of this page. Axle Options: Front: Boost - 15mm x 110mm Thru Axle. Non Boost - 15mm x 110mm Thru Axle
This custom front mountain bike (MTB) wheel comes kitted out with a tubeless ready WTB KOM Tough i35 TCS rim, a Hope Pro 4 MTB hub and stainless steel, plain gauge spokes. As a result, you'll benefit from its smooth and dependable rolling performance as you carve your way around the mountain. This wheel is ideal for enduro, all-mountain and gravity/downhill riding. WTB KOM Tough i35 TCS Rim This rim of this wheel features a super-durable alloy construction to ensure it can take everything the mountain throws at it, and it's also lightweight to ensure exceptional climbing efficiency. The durability is further enhanced by the I-Beam construction, while the dual support beams increase the stiffness for consistent, reliable handling. Plus, the 4D angled-spoke drilling disperses tension evenly to allow for a fast-rolling performance. Rim Features: Rim Material: Aluminium Rim Type: Clincher Tyre Compatibility: Standard clincher and tubeless clincher Tubeless Compatible: Yes Usage: Trail, Enduro, Gravity Width: 35mm (inner) Brake Compatibility: Disc brake only ERD: 27.5": 568mm; 29": 604mm 4D angled spoke drilling eliminates binding and lateral loading, dispersing tension more evenly over a greater area Recessed channel along rim centre has enabled installation of WTB's Solid Strip Solid Strip prevents tubeless tape sagging at the spoke holes for a smooth, consistent tyre/rim interface Weight: 602g (27.5"), 630g (29") Rim Technologies: UST Tubeless Ready: The UST concept improves traction, control and comfort while reducing inertia and flats. TCS 2.0 Technology: This refined version of the “Tubeless Compatible System” offers the same high-performance, lightweight mountain bike rim structure, but is now easier to install and more dependable. Hope Pro 4 Boost MTB Hub From their very first Ti-glide hubs launched back in 1993, Hope has had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstay of this reputation has been their attention to detail in both the bearings they use and their inspection processes. All bearings are from world-renowned manufacturers to ensure the highest quality. Also, every hub shell, freehub and axle are produced in their Barnoldswick factory and checked and inspected to the highest degree. The Hope Pro 4 hub builds upon the brand's Pro 2 EVO hub and offers superb attention to detail and excellent rolling performance thanks to the high-quality Schaeffler bearings throughout. Hub Features: Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Bearing Type: Sealed Stainless Steel cartridge bearings Conversions are available (sold separately) for 15mm Boost, 20mm Boost and Torq Boost hub flanges are moved outboard 5mm compared to the standard 100mm front hub to increase wheel stiffness, only compatible with boost forks Weight: 188g
The Race Face AR Plus rim is laced to Hope's Pro 4 Hub to bring you an exclusive MTB wheel ideal for cross country (XC), trail, enduro and downhill (DH) mountain bike riding. The Hope Pro 4 hub is also convertible to suit most modern axle standards and the Race Face rim's 40mm internal width means it's compatible with plus-sized off-road tyres. Hope Pro 4 MTB Rear Hub The Hope Pro 4 hub builds upon their Pro 2 EVO hub and offers superb attention to detail, excellent rolling performance and thanks to the 4 pawl ratchet, a 10% quicker engagement. A highly durable, beautiful looking hub from Hope. From Hope's very first Ti-glide hubs launched back in 1993, they have had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstay of this reputation has been their attention to detail in both the bearings they use and their inspection processes. All the bearings used are from world-renowned manufacturers to ensure the highest quality. Also, every hub shell, freehub and internal axle are produced in their Barnoldswick factory and checked and inspected to the highest degree. Hub Features: Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Bearing Type: Sealed Stainless Steel cartridge bearings 4 Pawl Ratchet with 44 tooth engagement (8.2 deg) Rear Boost hub flanges move outboard 3mm compared to standard Pro 4 rear hub to increase complete wheel stiffness Freehub Options: Aluminium Shimano/SRAM 10-11 speed or SRAM XD cassette options Axle Compatibility: Multiple Axle and Hub Spacing Options, see selection menu Spoke count: 32 hole Weight: 12x142mm: 300g; 12x148mm Boost: 311g Race Face AR Plus Rim Engineered to roll with stability and pace over the most demanding terrains, this robust and reliable AR Plus MTB Rim boasts an impressive 40mm width that ensures you get the perfect tyre profile when using Plus tyres. Plus, this rim is tubeless-ready and versatile for everything from cross country (XC), trail, enduro and downhill riding. Rim Features: Rim Material: Aluminium Use: XC, Trail, Enduro, Downhill Internal Rim Width: 40mm External Rim Width: 44mm Spoke Holes: 32 Tubeless Ready: Yes Weight: 595g Please Note: there are multiple front and rear hub options for these wheels via the selection menu at the top of this page. Axle Options: Rear: Boost - 12mm x 148mm Thru Axle. Non Boost - 12mm x 142mm Thru Axle Freehub Options: Shimano HG or SRAM XD
This custom rear mountain bike (MTB) wheel comes kitted out with a tubeless ready WTB KOM Tough i35 TCS rim, a Hope Pro 4 MTB hub and stainless steel, plain gauge spokes. As a result, you'll benefit from its smooth and dependable rolling performance as you carve your way around the mountain. This wheel is ideal for enduro, all-mountain and gravity/downhill riding. WTB KOM Tough i35 TCS Rim This rim of this wheel features a super-durable alloy construction to ensure it can take everything the mountain throws at it, and it's also lightweight to ensure exceptional climbing efficiency. The durability is further enhanced by the I-Beam construction, while the dual support beams increase the stiffness for consistent, reliable handling. Plus, the 4D angled-spoke drilling disperses tension evenly to allow for a fast-rolling performance. Rim Features: Rim Material: Aluminium Rim Type: Clincher Tyre Compatibility: Standard clincher and tubeless clincher Tubeless Compatible: Yes Usage: Trail, Enduro, Gravity Width: 35mm (inner) Brake Compatibility: Disc brake only ERD: 27.5": 568mm; 29": 604mm 4D angled spoke drilling eliminates binding and lateral loading, dispersing tension more evenly over a greater area Recessed channel along rim centre has enabled installation of WTB's Solid Strip Solid Strip prevents tubeless tape sagging at the spoke holes for a smooth, consistent tyre/rim interface Weight: 602g (27.5"), 630g (29") Rim Technologies: UST Tubeless Ready: The UST concept improves traction, control and comfort while reducing inertia and flats. TCS 2.0 Technology: This refined version of the “Tubeless Compatible System” offers the same high-performance, lightweight mountain bike rim structure, but is now easier to install and more dependable. Hope Pro 4 MTB Boost Rear Hub From their very first Ti-glide hubs launched back in 1993, Hope has had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstay of this reputation has been their attention to detail in both the bearings they use and their inspection processes. All bearings are from world-renowned manufacturers to ensure the highest quality. Also, every hub shell, freehub and axle are produced in their Barnoldswick factory and checked and inspected to the highest degree. The Hope Pro 4 hub builds upon the brand's Pro 2 EVO hub and offers superb attention to detail and excellent rolling performance thanks to the high-quality Schaeffler bearings throughout. Hub Features: Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Bearing Type: Sealed Stainless Steel cartridge bearings 4 Pawl Ratchet with 44 tooth engagement (8.2 deg) Available in 148 x 12mm thru-axle Conversions are available for 141 x QR (sold separately) Freehubs available to suit 10/11spd Shimano, 12 Speed MicroSpline or Hope cassette (sold separately) Specifically designed for 148 x 12mm frames with hub flanges moved outboard 3mm compared to standard Pro 4 rear hubs that increase the complete wheel stiffness Freehub: SRAM XD driver Weight: 311g Please Note: there are multiple front and rear hub options and rim sizes available for these wheels via the selection menu at the top of this page.
Whether you're competing in an enduro event or wanting a more confident, performance-orientated braking setup for your trail riding adventures, this hydraulic disc brake is developed for reliable, consistent braking operation. It features a more ergonomical lever shape that's designed to provide the best mechanical advantage during braking. Another highlight is its increased power when compared to its predecessor the Tech 3, which allows it to offer a 30% pressure increase. Race Ready Hydraulic Disc Brake The Tech 4 E4 builds on Hope's 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses updated internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping the legendary feel and modulation. The updated E4 caliper utilises hybrid-style stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use. Tool-Free Reach Adjust Designed for simplicity, Hope has kitted out this mountain bike (MTB) hydraulic disc brake with a tool-free reach adjustment and bite point. This means that you can easily fine-tune the distance between the lever blade and your handlebar for a more customised braking feel that matches your hand size as well as your riding style. Coming complete with a range of performance-enhancing technologies, the Hope Tech 4 E4 Brake - No Rotor is a perfect upgrade for powerful and consistent braking performance, wherever your next ride takes you. Technologies: - 30% pressure increase compared with the Tech 3 brake. - Hinged clamp design to reduce weight and reservoir area increased to lower overall stack height. - Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master cylinder is also possible to give a wide range of lever position options. - Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use. - The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3. - All Tech 4 brakes are supplied with new racing compound pads.
These Genuine Hope Pro 4 pawls are designed, tested and manufactured by Hope in their Barnoldswick plant. Specifically designed for use with Hope Pro 4 rear mountain bike (MTB) hubs, they come as a set of four.
Ideal for all-mountain and enduro riding, used along with one of Hope’s powerful and adjustable levers, this caliper will help you to enjoy super fine descending control and awesome stopping power.
These Hope Pro 2 Evo bearings feature a hard-wearing stainless steel construction, which allows them to handle all the abuse that comes with long days on your bike. Included in the pack are 3x S6803 and 2x S61903 type bearings for a simple and straightforward replacement. Specifically designed for use with XD freehubs.
This replacement pivot bolt is designed to replace the old pivot in your Hope Tech 4 brake lever blade. It is ideal for when it's time to service your brakes or when you need to replace old or damaged parts and breathe new life back into your braking setup. This is a genuine Hope spare part. Manufacturer's Part Number: HBSP425
For Mono lightweight front hub.
Constructed from a super-tough 6061-T6 aluminium, this robust rim brilliantly bears the brunt of rowdy mountain riding. Measuring a well-balanced 30mm width, it ensures a steady and consistent roll across the most inconsistent courses. Tubeless-ready for enhanced grip, control and protection with lower inflation tyres, this Fortus model is a formidable addition to your MTB wheel setup.
These Hope Pro 4 bearings feature a hard-wearing stainless steel construction, which allows them to handle all the abuse that comes with long days on your bike. They offer a simple and straightforward replacement. Please Note: There are two bearing kits for the Pro 4, one kit that suits the Shimano HG (HUB536) and the Hope (HUB538) freehub versions and one kit that suits the SRAM XD (HUB537) and Shimano MicroSpline (HUB545) versions.
This trail-ready MTB hydraulic disc brake features an updated lever shape that's designed to provide better ergonomics for a superior mechanical advantage during braking. Hope has also improved its functionality to provide a 30% pressure increase compared to its predecessor the Tech 3 brake. Shifter integration has also been improved and it now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master cylinder is also possible to give a wide range of lever position options. Lightweight MTB Hydraulic Disc Brake The Tech 4 X2 builds on the brand's 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses revised internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping the legendary feel and modulation. Combine this with an updated X2 Postmount or Flatmount caliper a lightweight adjustable brake. Tool-Free Reach Adjust Designed for simplicity, Hope has kitted out this mountain bike (MTB) hydraulic disc brake with a tool-free reach adjustment and bite point. This means that you can easily fine-tune the distance between the lever blade and your handlebar for a more customised braking feel that matches your hand size as well as your riding style. Coming complete with a range of performance-enhancing technologies, the Hope Tech 4 X2 Brake - No Rotor is a perfect upgrade for reliable, lightweight braking without adding any unnecessary excess grams to your ride. Technologies: - 30% pressure increase compared with the Tech 3 brake. - Hinged clamp design to reduce weight and reservoir area increased to lower overall stack height. - Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master cylinder is also possible to give a wide range of lever position options. - The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3. - All Tech 4 brakes are supplied with new racing compound pads.
These kits are specifically designed for use with the Hope RS4 CL front hub so you can match up your favourite Hope Road hub with the latest fork standards.
Measuring a 23mm-width, the sturdy and steady rim keeps you rolling through the most difficult routes with balance and speed, whatever the terrain throws at you. Turning on a Pro 4 hub, the wheel goes through the motions with minimal friction while maximising performance as you shoot for XC silverware. The hub comes also comes complete with a four-pawl, ratchet system freehub, giving fast and effective engagement for taking on intense inclines and fast dashes across the forest floor. Disc brake-optimisation and a tubeless-ready profile finish off this bold and big-riding back wheel. End Caps Note: - 12x142mm rear wheels come with 135 QR end caps included. - Single Speed 135mm rear wheels come with 135x10mm bolt end caps.
This Hope Pro 4 Boost Conversion is perfect for converting your Hope Pro 4 front mountain bike (MTB) hub to 15x110mm Boost sizing, and it's very easy to use. Plus, it helps to increase rigidity and handling when taking on bigger and bolder routes. The Hope Pro 4 Boost Adapter fits onto the driveside of your hub, extending the axle by 10mm to reach the Boost standard. Please Note: To maintain correct wheel centring, your front wheel will need re-dishing by 5mm.
CNC machined and laser cut in Barnoldswick, England, the new design with wider braking surface to make them more compatible with brakes manufactured by other brands.