This kids mountain bike saddle is 137mm wide and uses light, high-density foam for maximum comfort & wear. It features a hard-wearing cover, which is perfect at handling multiple changes to riding positions and the demands that a younger rider will put on the saddle.
The grips are 115mm long which is the perfect length for small hands and there is a flange on inner clamp for additional comfort and protection. The outer end is soft rubber to protect the rider and also the handlebar in the event of a crash.
This Nukeproof top headset assembly is compatible with the bearings from the Nukeproof Steel Bearing or the upgraded Nukeproof Ti coated bearing with stainless balls. Designed to ensure the highest performance for tough and challenging conditions, this model has been engineered with durability and quality in mind. The latest generation of headsets has been revised, improved and expanded for optimum fit, sealing and performance as well as compatibility with a wide range of fork and frame standards. Featuring sealed angular contact bearings, this upper bearing cup which is CNC-machined from proprietary aluminium offers the optimum balance of lightweight, strength and durability for performance across all riding disciplines. Nukeproof has also kitted it out with a hard anodised finish and laser-etched graphics for maximum toughness as well as a sleek appearance. Don't know which headset you need? No problem! Simply use our Headset Technical Guide which includes a Headset Finder. If you need a top cap and star nut, this can be purchased here.
Nukeproof Urchin Youth SaddleTried and tested by the Nukeproof team's very on children, the Urchin saddle has been carefully shaped to suit the specific needs of younger riders, giving comfort that lasts on day long trail sessions.Kids Comfortable SaddleThis kids mountain bike saddle is 137mm wide and uses light, high-density foam for maximum comfort & wear. It features a hard-wearing cover, which is perfect at handling multiple changes to riding positions and the demands that a younger rider will put on the saddle.Features: Foam: Light, high-density foam Width: 137mm Length: 258mm Rail Size: 7mm Available in Black, Red, Blue, Purple Weight: Approx 291gBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Urchin Youth SaddleTried and tested by the Nukeproof team's very on children, the Urchin saddle has been carefully shaped to suit the specific needs of younger riders, giving comfort that lasts on day long trail sessions.Kids Comfortable SaddleThis kids mountain bike saddle is 137mm wide and uses light, high-density foam for maximum comfort & wear. It features a hard-wearing cover, which is perfect at handling multiple changes to riding positions and the demands that a younger rider will put on the saddle.Features: Foam: Light, high-density foam Width: 137mm Length: 258mm Rail Size: 7mm Available in Black, Red, Blue, Purple Weight: Approx 291gBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Urchin Youth SaddleTried and tested by the Nukeproof team's very on children, the Urchin saddle has been carefully shaped to suit the specific needs of younger riders, giving comfort that lasts on day long trail sessions.Kids Comfortable SaddleThis kids mountain bike saddle is 137mm wide and uses light, high-density foam for maximum comfort & wear. It features a hard-wearing cover, which is perfect at handling multiple changes to riding positions and the demands that a younger rider will put on the saddle.Features: Foam: Light, high-density foam Width: 137mm Length: 258mm Rail Size: 7mm Available in Black, Red, Blue, Purple Weight: Approx 291gBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
A genuine replacement headset bearing from Nukeproof. This bearing has Ti coated races and Grade 10 Stainless steel balls.The bearing is ABEC 5 certified which means that it has passed tests which include ID and OD tolerance’s, roundness of ball, trueness of faces & surfaces aswell as noise testing at high RPM. These bearings have been designed and tested for the harshest of UK winters so if you want bearings that won’t let you down then these are the ones to get. Works with all Nukeproof headsets from 2015 onwards. Key Features: 1 1/8" Bearing: Replacement for all 1 1/8th Nukeproof headsets (Top Cups: T1 and T2, Bottom Cups B1-B4),Fits Nukeproof 1 1/8" headset cups for 1 1/8" steerer,Dimensions: 41.0 x 45 x 45mm,. 1.5"Bearing: Replacement for 1.5" Nukeproof headsets (2015 onwards Top Cup T3, Bottom Cup B5- B8),Fits Nukeproof 1.5" headset cups for 1.5" steerer,Dimensions: 51.8 x 45 x 45mm.
Nukeproof Urchin Youth SaddleTried and tested by the Nukeproof team's very on children, the Urchin saddle has been carefully shaped to suit the specific needs of younger riders, giving comfort that lasts on day long trail sessions.Kids Comfortable SaddleThis kids mountain bike saddle is 137mm wide and uses light, high-density foam for maximum comfort & wear. It features a hard-wearing cover, which is perfect at handling multiple changes to riding positions and the demands that a younger rider will put on the saddle.Features: Foam: Light, high-density foam Width: 137mm Length: 258mm Rail Size: 7mm Available in Black, Red, Blue, Purple Weight: Approx 291gBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Digger Mountain Bike Hanger KitThis kit includes a replacement gear hanger for 2018-2021 Nukeproof Digger frames.Features: Kit Includes: Replacement Gear Hanger for 2018-2021 Nukeproof Digger framesBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
High quality durable protective cover designed for 2021-2022 Megawatt model.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed in-house by Nukeproof, these jockey wheels for SRAM and Shimano derailleurs offer a significant upgrade over the standard-fitted jockeys. Available in 10, 11 and 12 speed, Nukeproof has an option to suit most current derailleurs. Manufactured from hard-wearing lightweight polyoxymethylene plastic with a stainless-steel bearing, these jockey wheels are designed for durability and longer service life. The unique narrow-wide tooth profile design also allows for better shifting and reduced noise from your drivetrain. The Shimano options have a longer tooth on the top sprocket to improve shifting, the lower jockey wheel has a shorter tooth profile to reduce noise and increase efficiency. The SRAM options have a specific narrow-wide profile to perfectly fit the chain providing a crisper shift, smoother drive train and reduced noise. Click here to view and download the Nukeproof Jockey Wheel Guide.
Nukeproof Horizon Race Handlebar GripsNukeproof developed their Horizon Race Handlebar Grips in collaboration with their top downhill and enduro pro riders. By using their expert input, Nukeproof has created grips with superior vibration damping, comfort, and grip in all weather conditions. In comparison to their firmer "Endurance" model, which aims to be as durable as possible, this "Race" model uses a much softer and grippier A15 Kraton compound to help you maintain your hand position.Ultimate Comfort and ControlThe Horizon Race grips also feature a unique, multidirectional, and tapered grip pattern that provides a cushioning effect in key areas and grip in all directions. So, whether you prefer to ride with or without gloves, you'll enjoy consistent and comfortable grip no matter how hard you're pushing yourself!Locked on and SupportiveWith lockrings on either end, these grips are going nowhere. Even as you throw yourself into the berms and land the biggest jumps, they'll maintain a secure connection with the bar. These grips have an asymmetrical inner flange to provide support without obstructing access to your shifter.Features:A15 Kraton super soft rubber compoundDual locking mechanismsLength: 143mmOuter Diameter: 31.5-33mm (tapered)Built for: Trail, All Mountain, Enduro, Downhill, FreerideWeight: 130g (pair)Lock-on Grips instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent Mountain Bike Shock Bolt KitThis Dissent Shock Bolt Kit is for use with the 2020-2022 Nukeproof Dissent frame. Features: Kit Includes: 1x NP-73 (Front Shock Bolt) 1x NP-74 (Rear Shock Bolt)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Replacement Chain Guide BashguardThis replacement bash guard is specifically designed for use with Nukeproof chain guides. Ready for fast and rebellious off-road runs, this model features a polymide construction which makes it more than capable of handling all the sudden knocks and jolts from the trails.Please note: Bolts are not supplied with this model. Replacement bolt kits are available separately.Features: Material: Polymide Use: MTB Compatibility: Nukeproof chain guidesBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.