Search found 1947 products for nukeproof

Nukeproof Horizon SL Saddle - Black
  • £40.00
  • RRP £49.99
  • Saving you £20

The Nukeproof Horizon SL Saddle was developed in conjunction with Nukeproof's DH & Enduro pro riders to offer superior comfort in a lightweight and durable packageErgonomic shape with curved rear holds the rider in optimal pedalling positionRear cut out provides improved tyre clearance on bikes with long dropper postsVacuum formed water-repellent microfibre cover is massively durable134mm wide and 260mm long, giving plenty of room to move around when descending & climbingThe ergonomic design was achieved using a combination of different densities of super light foam to offer maximum comfort without increasing weight. It is curved up at the rear to hold the rider in an optimised pedalling position on long climbs and to provide more tyre clearance for longer travel bikes. It has been finished in a durable vacuum formed water repellent microfibre cover so that even on wet days it remains comfortable while shrugging of impact damage from crashes. If you want a comfortable, durable & lightweight saddle for your mountain bike, check out the Nukeproof Horizon SL!

VIEW ITEM
Nukeproof Neutron V2 Front Wheel
  • £119.99

The Nukeproof Neutron V2 Front Wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features a Nukeproof Neutron front hub that is available for both 15mm or 20mm spacings in both Boost and non-Boost. Nukeproof also sell end caps for QR (available separately).Rim Material: 6066 AlloyUse: MTB, Trail, All Mountain, Enduro and DHWheel Size: 27.5" or 29" options availableSpacing Options: 15x100mm, 15x110mm, 20x110mm Non Boost, 20x110mm BoostSpoke Type: J-BendSpoke Count: 32Lacing Pattern: 3xDisc Mount: 6-boltInner Rim Width: 28mmExternal Rim Width: 32mmRim Height: 18mmTubeless Ready: Yes Pre-taped and valve suppliedBuild: Hand builtThe 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke. The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof s Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.

VIEW ITEM
Nukeproof Horizon V2 Rear Wheel
  • £250.00

The Nukeproof Horizon V2 Rear Wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Rim Material: Alloy Nukeproof BlendUse: MTB, All Mountain, Enduro and DHSpacing Options: 142x12mm; 148x12mm and 150/157x12mmConversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately)Freehub Options: Shimano HG, Shimano Micro spline and SRAM XDRear Hub Engagement: 102 points of engagement (every 3.52°)Wheel Size: 27.5" or 29" optionsInner Rim Width: 30mmOuter Rim Width: 35mmRim Height: 21.6mmTubeless Ready: Yes, pre-taped and valve suppliedSpoke Count: 32Spoke Type: J-BendDisc Mount: 6-BoltLacing Pattern: 3xBuild: Hand builtSingle or Pair: SingleWeight: 27.5 148x12mm HG: 1093g; 27.5 150x12mm HG: 1116g, 29 148mm x 12mm XD: 1146g (All weights include tape & valve)Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 Bearings - After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the LLU/LLB seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 Hub - This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose to upgrade your drivetrain in the future.Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included - Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built in. A full range of spares are available to service your hub in the future.

VIEW ITEM
Nukeproof Neutron V2 Rear Wheel
  • £169.99

The Neutron V2 Rear Wheel from Nukeproof has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.Rim Material: 6066 AlloyUse: MTB, Trail, All Mountain, Enduro and DHWheel Size: 27.5" or 29" options availableSpacing Options: 142x12mm, 148x12mm, 150/157x12mmConversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately)Rear Hub Engagement: 36 points of engagement (every 10°)Freehub Options: Shimano HG, Shimano Micro spline, or SRAM XDSpoke Type: J-BendSpoke Count: 32Lacing Pattern: 3xDisc Mount: 6-boltInner Rim Width: 28mmExternal Rim Width: 32mmRim Height: 18mmTubeless Ready: Yes Pre-taped and valve suppliedSingle or Pair: SingleBuild: Hand builtWeight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeThe 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.

VIEW ITEM
Nukeproof Horizon V2 Front Wheel
  • £149.99

The Nukeproof Horizon V2 Front Wheel has been completely redesigned from the ground up and delivers fast and smooth-rolling performance across every inch of the mountain.Rim Material: Alloy Nukeproof BlendUse: MTB, All Mountain, Enduro and DHSpacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm BoostWheel Size: 27.5" or 29" optionsInner Rim Width: 30mmOuter Rim Width: 35mmRim Height: 21.6mmTubeless Ready: Yes, pre-taped and valve suppliedSpoke Count: 32Spoke Type: J-BendDisc Mount: 6-BoltLacing Pattern: 3xBuild: Hand builtSingle or Pair: SingleWeight: 27.5 15mm Boost: 884g; 27.5 20mm Boost: 946g; 29 15mm Boost: 897g (All weights include tape & valve)This MTB front wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 Bearings - After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the LLU/LLB seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 Hub - This MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately.What's Included - Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD and other tyre inserts, as well as the cap having a core remover built in. Conversion kits and replacement end caps available separately.

VIEW ITEM
Nukeproof Horizon V2 Freehub Body
  • £49.99

This freehub body is engineered for directly replacing the freehub body that comes with Nukeproof Horizon V2 hubs. It features a hard-wearing alloy construction, which makes it ideal at handling all the abuse that's associated with fast and intense MTB rides. Perfect for replacing your old or worn-out existing freehub body, it allows for quick and easy installation.Material: AlloyPawl: 6-PawlHub Compatibility: Horizon V2Cassette Compatibility: Shimano HG 9, 10, 11 and 12 Shimano HG spline cassettes; SRAM XD SRAM Eagle XD cassettes and Shimano Microspline Shimano microspline cassettesPoints of Engagement: 102Nukeproof Part Numbers: Shimano HG Freehub: NUKHORV2102TFHHG; SRAM XD Freehub: NUKHORV2102TFHXD and Shimano Microspline Freehub: NUKHORV2102TFHMSOption: Shimano HG, Shimano Microspline, SRAM XDPlease Note: This freehub is only compatible with Nukeproof Horizon V2 hubs.A new hub seal and bushing is supplied with Nukeproof freehubs.Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub.Microspline freehubs also include the drive side end cap so you can easily convert an HG / XD hub to microspline.If you are converting a microspline hub to XD or HG, you will also require a new drive side end cap.Freehub Installation Instructions:Remove drive side end capPull off old freehub turning anticlockwise as you pullCheck hub seal for damage, if it is damaged remove the sealIf seal was removed, press on new sealApply grease hub ratchet ringApply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwiseRefit drive side end cap

VIEW ITEM
Nukeproof Neutron V2 Microspline Conversion Kit
  • £55.00

This conversion kit is specifically designed for use with Nukeproof Neutron V2 hubs. It contains all the parts needed to convert your 148mm Nukeproof Neutron HG / XD hub to have a microspline freehub. Please note this kit requires the hub to be stripped.Use: MTBCompatibility: Nukeproof Neutron V2 hubsIncludes: Complete freehub, axle and drive side end capColour: BlackOption: Shimano Microspline

VIEW ITEM
Nukeproof Neutron V2 Freehub Body
  • £44.99

This freehub body set is designed for use with Nukeproof Neutron V2 hubs. A new hub seal and bushing is supplied with Nukeproof freehubs. To avoid damage to the hub seal, turn the freehub anti-clockwise as you fit.Material: AlloyUse: MTBPawl: 4-pawlHub Compatibility: Nukeproof Neutron V2Cassette Compatibility: Shimano HG 9, 10, 11 and 12 Shimano HG spline cassettes; SRAM XD SRAM Eagle XD Cassettes or Shimano Microspline Shimano microspline cassettesPoints of Engagement: 36Part Number: Shimano HG Freehub: NUKNEUV236TFHHG; SRAM XD Freehub: NUKNEUV236TFHXD; Shimano Microspline Freehub: NUKNEUV236TFHMSThis freehub is only compatible with Nukeproof Neutron V2 hubsPlease Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub.Options:Shimano HGShimano MicrosplineSRAM XDIf you have a HG / XD hub and want to convert to microspline, you will need Nukeproof's microspline conversion kit (Part Number: NUKNEUV236MSCONV).Freehub Installation Instructions:Remove drive side end capPull off old freehub turning anticlockwise as you pullCheck hub seal for damage, if it is damaged remove the sealIf seal was removed, press on new sealApply grease hub ratchet ringApply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwiseRefit drive side end cap

VIEW ITEM
Nukeproof 15mm Front Thru Axle - 155mm x 13.5mm Thread P1.5
  • £17.99

This thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm RockShox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Hex head at both axle ends for easy fitting & removalColour: BlackSize: 158mm x P1.5 x 10mm (Rockshox Boost), 155mm P1.5 x 13.5mm (Fox Boost)Option: RockShox Boost, Fox BoostThe axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks.

VIEW ITEM
Nukeproof 15mm Front Thru Axle - 158mm x 10mm Thread P1.5
  • £17.99

This thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm RockShox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Hex head at both axle ends for easy fitting & removalColour: BlackSize: 158mm x P1.5 x 10mm (Rockshox Boost), 155mm P1.5 x 13.5mm (Fox Boost)Option: RockShox Boost, Fox BoostThe axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks.

VIEW ITEM
Nukeproof 12mm Rear Thru Axle - 174mm x 16mm Thread P1.0
  • £17.99

This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.

VIEW ITEM
Nukeproof 12mm Rear Thru Axle - 164mm x 13mm Thread P1.5
  • £17.99

This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.

VIEW ITEM
Nukeproof 12mm Rear Thru Axle - 170mm x 13mm Thread P1.5
  • £17.99

This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.

VIEW ITEM
Nukeproof 12mm Rear Thru Axle - 174mm x 20mm Thread P1.7
  • £17.99

This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.

VIEW ITEM
Nukeproof 12mm Rear Thru Axle - 180mm x 20mm Thread P1.7
  • £17.99

This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.

VIEW ITEM
Nukeproof 12mm Rear Thru Axle - 175mm x 12mm Thread P1.5
  • £17.99

This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.

VIEW ITEM
Nukeproof 12mm Rear Thru Axle - 180mm x 13mm Thread P1.0
  • £17.99

This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.

VIEW ITEM
Nukeproof 12mm Rear Thru Axle - 181mm x 20mm Thread P1.5
  • £17.99

This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.

VIEW ITEM
Nukeproof Horizon Bolted Accessory Strap - Blue
  • £17.99
  • RRP £19.99
  • Saving you £10

The Nukeproof Horizon Accessory Strap is an ideal on-bike storage solution that's durable and versatile for mounting spares, tubes or a pump to one of your bike's bottle cage mount points.Back plate colours: Black, Red, Blue, Purple, Grey, CopperStrap colour: BlackAdjustment: The mounting plate allows for 20mm of adjustmentStrap lengths:50mm x 314mm38mm x 265mm38mm x 130mmGot a bike with mounting holes for an accessory plate or got a bottle cage mounting point not being used This Nukeproof Horizon accessory strap will be the perfect fit on your bike. The kit comes with an alloy backplate and 3 different lengths of strap allowing you to carry some spares on your ride. The longest strap allows an inner tube, 25g CO2 canister, small pump like LifeLine Hybrid CO2 Mini Pump - MTB & Nukeproof tubeless repair kit. The shortest strap can also be used along with the Nukeproof Horizon carbon water bottle cage allowing you to carry a CO2 canister or small diameter pump. The 2021 Nukeproof Mega & Giga bikes all have mounting holes under the top tube making this kit fully compatible.

VIEW ITEM
Nukeproof Horizon Bolted Accessory Strap - Red
  • £17.99
  • RRP £19.99
  • Saving you £10

The Nukeproof Horizon Accessory Strap is an ideal on-bike storage solution that's durable and versatile for mounting spares, tubes or a pump to one of your bike's bottle cage mount points.Back plate colours: Black, Red, Blue, Purple, Grey, CopperStrap colour: BlackAdjustment: The mounting plate allows for 20mm of adjustmentStrap lengths:50mm x 314mm38mm x 265mm38mm x 130mmGot a bike with mounting holes for an accessory plate or got a bottle cage mounting point not being used This Nukeproof Horizon accessory strap will be the perfect fit on your bike. The kit comes with an alloy backplate and 3 different lengths of strap allowing you to carry some spares on your ride. The longest strap allows an inner tube, 25g CO2 canister, small pump like LifeLine Hybrid CO2 Mini Pump - MTB & Nukeproof tubeless repair kit. The shortest strap can also be used along with the Nukeproof Horizon carbon water bottle cage allowing you to carry a CO2 canister or small diameter pump. The 2021 Nukeproof Mega & Giga bikes all have mounting holes under the top tube making this kit fully compatible.

VIEW ITEM
expand_less