The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 278g per pair Spindle: Forged scm435 chromoly steel Body: cast stainless steel Wings: cast stainless steel Spring: 300 series stainless steel Inner bearing: Needle Outer bearing: Cartridge Maximum rider weight: No restrictions Colours options: Silver/Blue or Silver/Red You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals. As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 286g per pair Spindle: Forged scm435 chromoly steel Body: stamped steel Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Silver/Black or Silver/Red As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat/half clip-in. Moulded traction pins and diamond plate area provide grip and support. Excellent mud-shedding: machined pedal body helps further prevent mud clogging. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Double shot Weight (per pair) 395g Spindle Forged scm 435 chromoly steel Body A380 aluminum Wings Stamped steel Spring 300 series stainless steel inner bearing Igus LL-glide bearing Cleats premium brass cleats included Pins Moulded traction pins release angle 15° or 20° Warranty 5 years
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 304g per pair Spindle: Forged scm435 chromoly steel Body: 2 piece machined aluminium Wings: Cast Steel Spring: 300 series stainless steel Inner bearing: Needle Outer bearing: Cartridge Maximum rider weight: No restrictions Colour options: Black/Silver Blue/Silver or Red/Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Great value pedal for MTB and BMX use. Alloy body with moulded pins Ball bearings CNC machined CroMo spindles 487g pr 9/16”
LOOK Trail Grip pedals with Activ Grip by Vibram rewrite performance and personality rules for off-road riding. Unique mountain peak-evolved composite stud and rubber lug tread inserts give brilliant bike control and slip free security without trashing your shoes or your shins. Race-bred bearings and four switchable colors deliver smooth style. TECHNOLOGY: FLAT PEDALS + LOOK ACTIV GRIP BY VIBRAMBODY: COMPOSITEGRIP: VULCANIZED RUBBER ACTIV GRIP + COMPOSITE STUDSSPINDLE: CHROMOLY +SURFACE AREA: 107x103 mmQ FACTOR: 63 mmWEIGHT (PEDAL): 265 gWEIGHT PAIR: 530 g
Bigger grippier lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! We didn’t stop to think about the future when our journey started some 17-years ago on the slopes of Schladming in ‘03. The prototype MK1 Penthouse Flat that debuted that weekend inevitably paved the way for the MK2 in ‘07 the MK3 in ‘09 and the MK4 in ‘14. While much has changed in that time our focus towards building the toughest and grippiest flat pedals on the market remains the same. Our goals for the MK5 pedals followed the same design and development path as every other Penthouse Flat pedal before it; utilise any advances in materials and manufacturing balance the weight and durability and maximise the amount of grip. From the MK4 to the MK5 we shed 65 grams per pair increased the platform footprint by 7% the dish by 1mm and decreased the pin width by 0.5mm. Taking on feedback from the MK4 we tried a number of different Q-factors to balance the foot’s position in relation to the cranks. With every flat pedal shoe on the market at our disposal we experimented with different platform sizes pin widths and pin heights to maximise grip underfoot. It was of the utmost importance that the MK5’s internals represent the best of the best. To do this we specced the most wear-resistant bushings from Igus. Their 'Endurance Runner' material - W300 - was a clear winner as this gave unrivalled resistance to external influences. Mud and water ingress is kept at bay with a full contact oil seal this keeps grease in and contaminants out even in the harshest of conditions. This configuration of quality parts is why the Penthouse series has a reputation for outstanding longevity. • Weight: 379g (Steel Axle)• Platform material: 7075 Alloy• Profile: 15mm• Platform: 100mm x 102mm• Dish: 2mm (concave)• Pin material: Stainless steel• Pin width: 3.5mm• Pin height: 4.5mm• Axle Material: EN24T Steel• Internals: 2 x Igus W300 bushes single sealed bearing and inboard rubber oil seal • Colours available: Burgtec Black Race Red Deep Blue Purple Rain Kash Bronze Iron Bro Orange Rhodium Silver Burgtec Bullion Gold Toxic Barbie Pink (Available in stores only) IS IT POSSIBLE TO MAKE A BETTER PEDAL? Here is what singletrack magazine had to say about the new Mk5 pedal. 'Those of you who can cast your mind back over the past 16 years might be able to remember the first 3 generations of Penthouse mountain bike pedals. Each one was a slight improvement on the last with a nip and tuck here and a refinement there. But by the time they came to the MK4 it was time for a completely new design. It looks like Burgtec is back in the rhythm as the MK5 isn’t a totally new pedal but a refinement over the last.'
Everything you’d expect from a Burgtec pedal but at a more affordable price point. Uncompromised grip rugged durability the exact same sculpted simple lines fully backed up with spares and at an affordable price. The best of both worlds can exist. Nylon and Fibreglass Body SCM415 Cromo Axle All replaceable steel pins 16mm Profile 1mm Dish Weight 376g Available in Race Red Deep Blue Purple Rain Iron Bro Orange Kash Bronze White Electric Yellow Burgtec Black 'Underfoot the composite Penthouse Mk4 pedals feel just as good as the more expensive alloy version. It has a good level of traction and manoeuvrability. The large platform gives you a good space to aim for and while those steel pins offer enough bite to keep you in check. Furthermore they don’t interfere with those last-minute foot repositioning moments. Throughout our time testing the composite Mk4 we rode then with various flat pedal shoes including Five Tens Shimano GR7’s and Giro Riddance and Bontrager Flatline shoes. Each combination complemented each other as well as Manchego cheese and a mature red wine or if you prefer chicken nuggets and a chocolate milkshake. The composite Penthouse Mk4 is a versatile pedal that works well in every environment trail and weather condition you can think of and came back asking for more.' Read the full Singletrack magazine Burgtec Composite Pedal review.
A dual-function pedal with regular cage on one side and a binding system with 6 degree float on the other. Compatible with the leading brand's cleats. Aluminium body and cage Super smooth sealed bearings Boron spindle E-CO1 cleats included 446g pr
Value for money dual-sided SPD pedal a favourite XC mountain bike SPD. Super-compact and lightweight design for a multitude of cycling uses Sealed cartridge bearing spindle keeps out water and mud for a smooth action and makes for a durable pedal Open design helps to shed mud Weight: 380 grams per pair
SPD-SL road pedal for entry level use at a value for money price. Wide lightweight resin body provides large shoe contact area to maximise power transfer and support whilst reducing weight Low maintenance sealed cartridge axle unit The low profile platform with open design allows for easy access and cleat adjustments Easy to clip into and release but with stable fit for maximum power transfer to the pedals Wider cleat and binding mechanism for better shoe/pedal contact than traditional SPD systems Comes with SH-SH11 shoe cleat yellow which provides 6 degree of sideways float Weight: 310 grams per pair
Compact dual sided SPD pedal designed for everyday use at good value price. Stable platform can be used with any type of SPD shoe and provides support for the foot Mud repelling design is suitable for year round use Cr-Mo spindle and low maintenance sealed bearing cartridge axle Cleat tension adjustment Weight: 352 grams per pair