Ideal pedal for recreational riders who commute and tour that combines SPD mechanism on one side and flat pedal body on the other you can ride with cleats or normal shoes. Serviceable cup and cone bearings add to long life of the pedals Adjustable cleat tension means you can start off with loose tension for extra easy engagement and release and turn up the tension as you progress Weight 533 grams per pair
The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 280g per pair Spindle: Forged scm435 chromoly steel Body: cast stainless steel Wings: stamped stainless steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Special edition colours: Silver/Black You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals. As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Super lightweight carbon SPD-SL road pedal for high performance road racing. Lightweight carbon body provides large shoe contact area to maximise power transfer and support whilst reducing weight The wide flat profile gives better road clearance and cornering also allowing wider bearing placement for increased rigidity and uniform load distribution Low profile 8.8 mm body height from axle centre to cleat contact surface Silky smooth 3-bearing axle system two ball- and one wide roller-bearing Stainless steel pedal body plate for increased durability Open design allows for easy access and cleat adjustments Wider shoe cleat has a long life and is easier for walking than other cleats Large binding target allows quick engagement while wide cleats provides more efficient pedalling Three types of shoe cleats available: fixed 3 degrees of float in each direction or 3 degrees of float from a font-centre pivot Weight: 228 grams
SYSTEM EX EX213 PEDALSDurable PP body and strong design for children's bikesBoron spindle9x6.5cm9/16' or 1/2' axles available
Giant’s Original MTB pedal combines a die cast aluminium low-profile platform with a strong boron heat treated spindle and 10 replaceable and adjustable pins per side to deliver optimal performance to flat-pedal mountain bikers everywhere. FEATURES Slim die-cast aluminium body is low profile and strong 10 replaceable and adjustable pins per side for secure foot engagement Boron heat treated spindle 9/16 thread Smooth ball-bearing internals SPECIFICATIONS Pedal System: Platform with adjustable pins Bearing Type: Loose ball-bearing Body Material: Die-cast aluminium Spindle Material: Boron heat treated Weight: 440g
Giant AC Pedals feature an aluminium cage and body toe clip compatible and lightweight at 238g per pair.Features.- Lightweight pedal.- Aluminium cage and body.- Toe clip compatible.- Weight: 238g per pair.Sizes.- Size: 90 x 65 x 27mm.
Bennies Platform pedals provide you with the traction you need to test your limits. These trusty pedals feature a lightweight alloy body sealed cartridge bearings and 24 replaceable pins for both an extremely reliable and grippy feel. Extruded aluminium pedal body optimized for low weight and high strength. Sealed cartridge extends bearing life with easy maintenance. Concave pedal body with 24 replaceable grub pins for maximum pedal grip. Dimensions: Width 100mm / Length 105mm Thickness: 17.30mm in the centre / 19mm at each end Weight: 430 grams Axle: Cr-Mo
We took our iconic V8/V12 body design and redesigned it. Lower profile larger platform and forged lightweight body make the V12 the most versatile sealed bearing at pedal around.V12 the Past Present and future of at pedal performance.100mm Long 95mm Wide [Platform] by 16mm High420g per pair
Discover the fun and the benefits of riding with the Kéo Classic 3 clipless pedal. Simple to use it is impossible to adjustment the cleat entry/release tension too low for an easy clip out. Its large and wide contact surface provides excellent pedalling stability. TECHNOLOGIES CHROMOLY SPINDLE FOR MORE RELIABILITY The Kéo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place. A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the centre of the pedal and an eccentric rotation (creating a shock on each rotation). LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the centre of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard the ISO 4210. SPECIFICATIONS USAGE: Beginner to advancedBODY: CompositeAXLE: ChromolyTHREADING: 9/16 X 20 mmBEARINGS: 1 ball bearing 1 needle bearing cartridgePEDAL STACK HEIGHT: 157 mmDISTANCE PEDAL SPINDLE / CRANK ARM: 53 mmCONTACT SURFACE AREA: 400 mm²FLOAT: 8 to 12 adjustable springCLEATS: Kéo Grip CleatsANGULAR MOVEMENT: 0 ° 4.5 ° or 9 ° according to the cleat colour (Black Grey Red)PEDAL WEIGHT:140 gr (348 gr per pair with cleats and screws)COLOURS: BlackACCESSORIES: A pair of Grey Kéo Grip cleats + screwsGUARANTY: 2 years
SYSTEM EX ED365 PEDALSAluminium double sided touring pedal with retro styling.Barrel polished aluminum body & cageBall bearingsBoron steel axle350g pair9/16' axle
The MT-E is a modern low profile MTB pedal offering more grip for your shoes. Now available with the amazing EZY system for easy removal and fitting of pedals when needed folding parking or at home these pedals will save all the annoyances of fixed axle pedals
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. The trade up from level 1 pedals is the 2 piece machined aluminium pedal body and increased warranty to 5 years. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 324g per pair Spindle: Forged scm435 chromoly steel Body: 2 piece machined aluminium Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Orange/Silver or Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.