Designed from the ground up, this race ready XC fork is part of Fox Suspension's Performance Series with an anodised finish on its upper tubes for extra durability as well as protection against corrosion in wet conditions. It's also equipped with a chassis that's 15% stiffer than the 32 standard model and features a revised arch shape that offers improved head tube clearance with shorter rakes. All set for cross country racing, its lightweight Float EVOL air spring and GRIP damper provide excellent tuneability and control, so you can tweak your suspension to match your riding style as well as the terrain. Fox Suspension has classed this model as its lightest 34 ever. The 34 Step-Cast is designed from the ground up to deliver uncompromised XC race performance with class-leading tuneability, chassis stiffness and strength. Float EVOL Air Spring Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. It also now also comes with the option to tune the negative air spring with a volume spacer. FIT GRIP Damper Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Updated Crown: Updated 58mm diameter crown. Manufacturer's Part Number: 910-21-015 Black 29" QR110 120mm 44mm
Proven at World Cup level by riders including Marcelo Gutierrez, the Onyx DC stands up to the most rugged of routes, using its massive 203mm of travel to eat up every morsel of impact on your way down the hill. Featuring hi-tech suspension technology such as AVA (Advanced Volume Adjust), which changes the height of the air piston for controlled end stroke progression, and OTT (Off The Top) tuneability, this fantastic fork is built to keep you upright and unrivalled at all times. Highly adaptable, it has six low-speed compression modes (firm, open and medium) and over 30 high-speed compression adjustments to handle harder impacts. Ensuring a stiff form, enhanced handling and clearance for larger wheels and tyres, this Boost-sized fork is built to take you up, down and across the mountain as comfortably as can be.
Engineered for performance, this XC suspension fork is part of Fox Suspension's legendary Factory Series and includes the best-of-the-best technologies and features for tackling the most challenging of cross country terrain conditions. Developed to exceed the demands of Factory-level riders, this model features a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance. Classed as the brand's lightest ever 34 fork thanks to its Step-Cast design, it is specifically developed from the ground up to deliver uncompromised execution with class-leading tuneability, chassis stiffness and strength. Coming complete with a lightweight Float EVOL air spring and a FIT4 damper with three-position adjust, this is a great choice of upgrade for dialling in your favourite settings and enjoying dependable front end suspension that matches your riding style as well as the terrain. XC Racing Fork with Float EVOL Air Spring Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer. FIT4 Damper with 3-Position Adjust In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Manufacturer's Part Numbers: 910-21-053 Black 29" KB110 100mm 44mm 910-21-060 Black 29" KB110 100mm 51mm 910-21-057 Orange 29" KB110 100mm 44mm 910-21-014 Black 29" KB110 120mm 51mm 910-21-013 Black 29" KB110 120mm 44mm 910-21-012 Orange 29" KB110 120mm 51mm 910-21-011 Orange 29" KB110 120mm 44mm
Specifically developed for dirt jump and slopestyle riders, this suspension fork is kitted out with 7000-series straight wall aluminium legs for an excellent balance of strength and durability in demanding terrain conditions. Available in a range of travel options to choose from, its travel is also internally adjustable so you can fine-tune it to match your riding style. Another highlight is it's compatible with post mount disc brake rotors, so you'll enjoy its reliable front end suspension performance combined with powerful and consistent braking. ACT Air Spring and ABS+ Jump Stack Damping No stranger to the finer details, this dirt jump ready suspension fork is fully kitted out with a range of adjustments to deliver a more rider-tuned feel on your bike. Its lightweight ACT Air air spring smoothens out your ride, while its ABS+ Compression Damping with Jump Stack makes it all set for big hits and fast jumps. Coming complete with adjustable air, compression and TPC Rebound Damping, this model makes it easy to dial in your ideal settings to match your style as well as the terrain conditions. The Circus project started as a way to get our slope-style riders into competition; but it wound up becoming an industry leading dirt jump fork for riders all over the world. Circus has set the benchmark for the everyday riders' jump session requirements, and delivered podium results at pro-level competitions for almost a decade. Additional Item Top Features: Leg Diameter: 32mm Ride Height: 458-478mm (100mm Option); 498-508mm (130mm Option) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 63mm Steerer: Multiple options available to select Travel: Multiple options available to select Crown: 1-1/8" Option: Hollow Beam; Tapered Option: Forged Beam Technologies: - 80/100mm or 120/130mm Internally Adjustable Travel (choose travel option from drop-down menu). - Air Spring. - ABS+ Compression Damping with Jump Stack. - Adjustable TPC Rebound Damping. - Wheel Size: 26". Manufacturer's Part Numbers: 191-29495-A801 Black 26" x 100mm 1.1/8" 191-29495-A803 White 26" x 100mm 1.1/8" 191-29495-A808 Black 26" x 130mm Tapered 191-29495-A806 White 26" x 130mm Tapered 191-29495-A807 Black 26" x 100mm Tapered
Coming equipped with high/low speed compression and rebound adjustments, this MTB fork allows you to adjust the air pressure for a more rider-tuned feel as you shred the trails. Fox Suspension has completed this Factory Series version with a stunning genuine Kashima coating for super-smooth operation and an eye-catching look. Item Top Features Continued: Travel: Multiple options available Remote Operated: No Lever Operated: Yes Lockout: No Wheel Size Compatibility: Mutliple options available
This dirt jump suspension fork comes equipped with a hard-wearing 4130 steel leg construction, which makes it tough and dependable when nailing your favourite stunts. Ideal for slope-style riders, this fork is also kitted out with 32mm stanchions for excellent stiffness and stability when landing. Another highlight is its coil spring, which ensures smooth and consistent performance as you conquer your way around the track. Adjustable Dirt Jump Fork Featuring ABS+ compression damping with Jump Stack as well as in-leg adjustable TPC rebound damping, this dirt jump fork makes it easy to dial in your settings to fit in with your riding style or the terrain. Thanks to its adjustable air, rebound and compression, it provides a more rider-tuned feel as you charge from jump to jump. Coming complete with 100mm travel that's internally adjustable from 80-100mm, this model is ready for fast and fun rides at your local track. The Circus project started as a way to get Manitou's slope-style riders into competition; but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for the everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. Additional Item Top Features: Travel: 100mm (80-100mm internally adjustable) Crown: 1-1/8" Hollow Beam, Tapered Forged Beam Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 63mm Wheel Size: 26" Offset: 41mm Ride Height: 458-478mm Manufacturer's Part Number: 191-29790-A801 Black 26" 100mm
Built to flatten every terrain on your way up, down and over the mountain, the confidence-inspiring DVO Sapphire D1 lets you ride fearlessly and comfortably. Providing six clicks of low-speed compression adjustment and over 30 high-speed adjustments, as well as Off The Top (OTT) and Advanced Volume Adjust (AVA) adjustability, every eventuality is catered for as you conquer every trail. Equipped with a further 14 clicks of shim stack-controlled damping and a closed cartridge bladder system, using different configurations to make the most of every ride is just a tweak or two away. A top-end fork for any ride, the DVO Sapphire D1 29 shines brightest when pushed to the limits.
Part of the Performance Elite series, this suspension fork features the exact same adjustments, damper, weight and 7000 series aluminium upper tubes as the Factory Series. The only difference is this version has an anodised finish on its upper tubes for extra protection against wear and corrosion, making it perfect for all weather and terrain conditions. Coming equipped with stiff 15QR x 110mm Boost axle spacing, 160mm travel and a wide range of adjustments, this is a great choice of upgrade for reliable front-end suspension performance wherever your next mountain adventure takes you. Float EVOL Air Spring Optimises small bump sensitivity by increasing negative air spring volume. Its linear spring curve delivers plushness off the top, extra mid-stroke support, and a more tunable bottom-out progression. Fox Suspension GRIP Damper Fox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork. Technologies: Lower Leg Arch: This suspension fork's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity-style riding. Lower Leg Bleeders: Allows for atmospheric pressure equalization for better fork performance, allowing full travel to be achieved and increasing small bump sensitivity and responsiveness. Lower Leg Bypass Channels: Increasing air volume within the lower legs reduces the amount of additional unintended pressure ramping. Lower leg bath oil also circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Kabolt X Axle: Kabolt X is a lightweight bolt-on floating axle to shave grams and increase torsional stiffness via a sleeveless, single-sided pinch bolt design.
This model of the legendary Fox 36 receives an update in the form of a revised crown design that's engineered with more steerer tube overlap. This improves its durability and maintains stiffness while dropping 20 grams. Updated Crown Lighter by 20 grams, while increasing steerer-tube overlap at the CSU, the updated crown design improves durability while our engineering maintains stiffness and drops weight. Kabolt X Axle Kabolt X is a lightweight bolt-on floating axle to shave grams and increase torsional stiffness via a sleeveless, it features a single-sided pinch bolt design. Lower Leg Bypass Channels Increasing air volume within the lower legs reduces the amount of additional unintended pressure ramping. Lower leg bath oil also circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Bleeders Allows for atmospheric pressure equalization for better fork performance, allowing full travel to be achieved and increasing small bump sensitivity and responsiveness. Lower Leg Arch Our new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity-style riding. Grip2 Damper Unparalleled ride quality and ultra-precise adjustability. Allows for external fine-tuning of suspension performance thanks to our patented Variable Valve Control (VVC) technology. Float EVOL Air Spring Optimises small bump sensitivity by increasing negative air spring volume. Its linear spring curve delivers plushness off the top, extra mid-stroke support, and a more tunable bottom-out progression. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.
Designed for the roughest mountain bike trails, the robust Marzocchi Bomber Z1 fork features an alloy construction. This makes it incredibly durable as you blast across the woodland with power and precision. Marzocchi has also gone the extra distance by using its massive 36mm stanchions to give you a superior ride quality over the roughest of terrain conditions. Adjustable FIT GRIP Damper Keeping your ride under control, the fantastic trail-ready Marzocchi Bomber Z1 Boost fork is also kitted out with an adjustable FIT GRIP damper. This cartridge style damper allows you to easily tweak its compression and rebound to maintain a consistent riding experience across unpredictable surface conditions. Another benefit of its damper is its combined LSC/HSC compression adjustment which ranges from open to lockout. This means you'll benefit from being able to ride in an open or locked position depending on the terrain. EVOL Air Spring Ready for the wildest of mountain bike rides, this Boost-compatible fork is equipped with an EVOL air spring. It works by increasing negative air spring volume to specifically provide optimum small bump sensitivity. This allows you to benefit from a smoother performance as you pedal over the rock gardens, tree roots and debris with momentum. Ideal for riders who want an MTB fork that delivers amazing front-end suspension, this is the ultimate choice of upgrade for confident and reliable performance.
This MTB fork features a robust aluminium and magnesium construction, which is more than capable of handling all the abuse that's associated with all-day epics in the mountains. Coming equipped with a Float EVOL air spring and a FIT4 damper, this model offers riders a wide range of compression, rebound and air pressure adjustments for the ultimate experience. Item Top Features Continued: Travel: Multiple options available Remote Operated: No Lever Operated Yes Lockout: No
Prepared for everything from backcountry adventures to day-long epics on your favourite mountain bike (MTB) trails, this suspension fork is engineered for the demands of modern trail riding. It's part of Fox Suspension's renowned Factory Series, which means that it comes feature-packed and is designed to exceed the demands of Factory-level riders. Another highlight is its genuine Kashima coating on its upper tubes that provides slippery smooth and ultra-durable performance as you carve your way around the mountain. Boasting a wide range of adjustments from its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC), this model makes it simple to dial in your ideal settings for smooth shock absorption and control on your ride. This version of the FOX 36 receives an update in the form of an updated crown with an revised design and engineering for more steerer tube overlap improving durability and maintaining stiffness while dropping 20 grams. MTB Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the updated 36, 38, and 40 models are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.