All new revamped hub shell and updated internals for Ryan “Biz” Jordan’s signature V3 RotatoR freecoaster hub. 6061-T6 aluminum hub shell. 14 mm heat-treated CRMO axle w/ allen insert for easy removal. Thrust needle bearing that reduces drag while back pedaling. Includes 3 slack washers for adjustments. ###section### Product Specs HUB TYPE:Freecoaster AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:632g / 22.3oz
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong Full 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. The Clutch V2 is laced to the G-Sport Ribcage Rim. At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for&G-Sport in an on-site foundry. It is a lightweight rim that can take anything you throw at it. With the Ribcage, the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. ###section### Product Specs WHEEL SIZE: 20" HUB: Odyssey Clutch V2 Freecoaster AXLE: 14mm Chromoly Male DRIVE SIDE: Left Side Drive RIM: G-Sport Ribcage SPOKES: Butted NIPPLES: Brass WEIGHT: 1389g / 49oz
Primo freemix V2 wheel with hub guards. The Primo Freemix wheel features the Primo freemix hub built onto the new V2 Primo Balance rim using Primo forged spokes. Only available in 9t version ###section### Product Specs WHEEL SIZE:20" HUB:Primo Freemix Hub AXLE:14mm Chromoly Male DRIVE SIDE:Right Side Drive RIM:Primo Balance SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1394g / 49.2oz
The Balance freecoaster hub features dual Nylon guards and offset flanges for a minimal aesthetic and is laced to the VS rim. Made from 7005 aluminium and featuring a V shaped I beam construction for added strength and holes drilled in the inner wall to save weight. The rim is welded at the seam and is available in 36 hole only. ###section### Product Specs WHEEL SIZE:20" HUB:Primo Balance Freecoaster AXLE:14mm Female DRIVE SIDE:Right Side Drive RIM:Primo VS SPOKES:Primo Forged Spokes NIPPLES:Brass WEIGHT:TBC
The Hope Technology Tech 3 Duo Complete Master cylinder is aimed at riders wanting to operate 2 calipers individually with one single hand. The master cylinder is combined with either our X2, E4 or V4 calipers (sold separately) and will suit any riding for XC to Enduro/All mountain.Unique double lever design for riders who want to operate both brakes individually with one handTech 3 lever offers genuine bite point and reach adjustment without toolsCNC machined from 2014 T6 aluminium alloyComplete master cylinder only calipers sold separatelyThe design is derived from the proven Tech 3 master cylinder and with the finger reach and bite point adjustments on each lever, you can be sure the levers will feel comfortable and suit your riding style. The Tech 3 Duo Master differs from our Uno system as there is a total in-dependency between the front and rear calipers.
The Hope Technology Tech 3 Duo Complete Master cylinder is aimed at riders wanting to operate 2 calipers individually with one single hand. The master cylinder is combined with either our X2, E4 or V4 calipers (sold separately) and will suit any riding for XC to Enduro/All mountain.Unique double lever design for riders who want to operate both brakes individually with one handTech 3 lever offers genuine bite point and reach adjustment without toolsCNC machined from 2014 T6 aluminium alloyComplete master cylinder only calipers sold separatelyThe design is derived from the proven Tech 3 master cylinder and with the finger reach and bite point adjustments on each lever, you can be sure the levers will feel comfortable and suit your riding style. The Tech 3 Duo Master differs from our Uno system as there is a total in-dependency between the front and rear calipers.
The Hope Technology Tech 3 Duo Complete Master cylinder is aimed at riders wanting to operate 2 calipers individually with one single hand. The master cylinder is combined with either our X2, E4 or V4 calipers (sold separately) and will suit any riding for XC to Enduro/All mountain.Unique double lever design for riders who want to operate both brakes individually with one handTech 3 lever offers genuine bite point and reach adjustment without toolsCNC machined from 2014 T6 aluminium alloyComplete master cylinder only calipers sold separatelyThe design is derived from the proven Tech 3 master cylinder and with the finger reach and bite point adjustments on each lever, you can be sure the levers will feel comfortable and suit your riding style. The Tech 3 Duo Master differs from our Uno system as there is a total in-dependency between the front and rear calipers.
The Hope Technology Tech 3 Duo Complete Master cylinder is aimed at riders wanting to operate 2 calipers individually with one single hand. The master cylinder is combined with either our X2, E4 or V4 calipers (sold separately) and will suit any riding for XC to Enduro/All mountain.Unique double lever design for riders who want to operate both brakes individually with one handTech 3 lever offers genuine bite point and reach adjustment without toolsCNC machined from 2014 T6 aluminium alloyComplete master cylinder only calipers sold separatelyThe design is derived from the proven Tech 3 master cylinder and with the finger reach and bite point adjustments on each lever, you can be sure the levers will feel comfortable and suit your riding style. The Tech 3 Duo Master differs from our Uno system as there is a total in-dependency between the front and rear calipers.
The Hope Technology Tech 3 Duo Complete Master cylinder is aimed at riders wanting to operate 2 calipers individually with one single hand. The master cylinder is combined with either our X2, E4 or V4 calipers (sold separately) and will suit any riding for XC to Enduro/All mountain.Unique double lever design for riders who want to operate both brakes individually with one handTech 3 lever offers genuine bite point and reach adjustment without toolsCNC machined from 2014 T6 aluminium alloyComplete master cylinder only calipers sold separatelyThe design is derived from the proven Tech 3 master cylinder and with the finger reach and bite point adjustments on each lever, you can be sure the levers will feel comfortable and suit your riding style. The Tech 3 Duo Master differs from our Uno system as there is a total in-dependency between the front and rear calipers.
The Hope Technology Tech 3 Duo Complete Master cylinder is aimed at riders wanting to operate 2 calipers individually with one single hand. The master cylinder is combined with either our X2, E4 or V4 calipers (sold separately) and will suit any riding for XC to Enduro/All mountain.Unique double lever design for riders who want to operate both brakes individually with one handTech 3 lever offers genuine bite point and reach adjustment without toolsCNC machined from 2014 T6 aluminium alloyComplete master cylinder only calipers sold separatelyThe design is derived from the proven Tech 3 master cylinder and with the finger reach and bite point adjustments on each lever, you can be sure the levers will feel comfortable and suit your riding style. The Tech 3 Duo Master differs from our Uno system as there is a total in-dependency between the front and rear calipers.
The Hope Technology Tech 3 Duo Complete Master cylinder is aimed at riders wanting to operate 2 calipers individually with one single hand. The master cylinder is combined with either our X2, E4 or V4 calipers (sold separately) and will suit any riding for XC to Enduro/All mountain.Unique double lever design for riders who want to operate both brakes individually with one handTech 3 lever offers genuine bite point and reach adjustment without toolsCNC machined from 2014 T6 aluminium alloyComplete master cylinder only calipers sold separatelyThe design is derived from the proven Tech 3 master cylinder and with the finger reach and bite point adjustments on each lever, you can be sure the levers will feel comfortable and suit your riding style. The Tech 3 Duo Master differs from our Uno system as there is a total in-dependency between the front and rear calipers.
The Hope Technology Tech 3 Duo Complete Master cylinder is aimed at riders wanting to operate 2 calipers individually with one single hand. The master cylinder is combined with either our X2, E4 or V4 calipers (sold separately) and will suit any riding for XC to Enduro/All mountain.Unique double lever design for riders who want to operate both brakes individually with one handTech 3 lever offers genuine bite point and reach adjustment without toolsCNC machined from 2014 T6 aluminium alloyComplete master cylinder only calipers sold separatelyThe design is derived from the proven Tech 3 master cylinder and with the finger reach and bite point adjustments on each lever, you can be sure the levers will feel comfortable and suit your riding style. The Tech 3 Duo Master differs from our Uno system as there is a total in-dependency between the front and rear calipers.