Brightness is key for daylight riding and the Lifeline Daylight Visible Rear Bike Light has a 38 chip COB LED providing a blaze of illumination. This coupled with a purposefully disruptive flash pattern make the Lifeline light a great partner on the road. With 7 modes to choose from the rider can balance the road and light conditions against the most appropriate illumination. The light is Micro USB Rechargeable taking 2 hours to achieve a full charge. The light can be post or helmet mounted and comes with both a post mount bracket (fits 19-32mm dia) and a velcro helmet strap. Burn times are as per below: High Beam (1.5HRs), Low Beam (4.5HRs), Flash 1 (20HRs), Flash 2 (5HRs), Flash 3 (7.5HRs), Flash 4 (15HRs), Daytime Flash (8HRs). Need to know how much battery is remaining? Simply double click on the light to show the remaining capacity. A constant light indicates 100-50% battery remaining, a slow flash indicates 49-25% and a fast flash tells you there's less than 24% battery remaining.
With a cosy acrylic blend the Watch Cap is made for a life in the mountains with vertical ribs for fit and comfort.
The spikes work best on ice when running at minimum pressure, while at maximum pressure the tyres can be ridden on ice-free roads with minimal road noise. Spikes F&Q's Can it also be ridden on a normal road? Without any problem, but if the road is only rarely covered with snow the resulting tyre noise may prove annoying. And it won't slide out in cornering? No. The spikes 'claw' really well into normal asphalt roads and even fast cornering is not a problem. Aren't spikes illegal? Bike tyre spikes are no problem. Only motor vehicles spikes are prohibited in some countries, because they damage the road. Fast E-bikes are however considered motor vehicles. Do the tyres have to be run in? In order to ensure that spikes are permanently fixed, tyres should be run in for about 25 miles on asphalt, while avoiding any fast acceleration or heavy braking. What is the lifespan of the spikes? All Schwalbe spikes have a core made of extremely hard wearing tungsten carbide, so they can cover a few thousand miles. It is normal for the spike edges to round off and for them to become more deeply embedded.
With the Racing Classic Bars 100mm reach and 138mm drop, you’ll be able to get into the optimum aero race position to maximise your effort. Plus, when you’re climbing, there are recessed channels for the cables, meaning increased comfort when your hands are on the tops. Brand-X has also given the Racing Classic Bars a black anodised finish for an understated, stealthy look which will enhance any road bike. Also, Centre markings help you to set up the bar position in the stem easily.
Tested to their limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation.
This high-quality construction ensures they can cope with the demands of elite-level downhill riding. Black with laser-etched graphics for a clean and bold look, the Turbine spacers are available in a wide range of sizes to help you to obtain the perfect handlebar height.
An essential tool for home and workshop mechanics.
If you're looking for a replacement pair of axle end caps for your Campagnolo Scirocco front hub, then this genuine-quality pair is the perfect solution.
This injector ensures you can easily install Caffelatex sealant into your tyres, ensuring you have an excellent puncture-mending system that allows you to keep riding and focus on your race.
Compatible with both Road and MTB SRAM Avid Brake Systems.
Off-road: Riding at lower pressure means better performance ... but at the same time, it increases the risk of failures. The limit so far is at about 20 psi, below which it’s hardly possible to dare to ride normal MTB tyres. But nothing stays the same: In the future, air pressure can be controlled in the tyre‘s double chambers. In the outer chamber, the air pressure is extremely low - ideal for maximum off-road performance. In the inner chamber, directly on the rim, there is high air pressure – even a very strong impact cannot dent the rim edge. At the same time, the inner high-pressure system secures the tyre onto the rim. “Burping”, the dreaded loss of air at low pressure in conventional tubeless systems, is impossible. The Name PROCORE is derived from "Progressive Core". The core (internal high-pressure chamber) progressively absorbs even the hardest impacts. Compatibility You can mount Procore with any tubeless compatible MTB tyre. The system is available for all three MTB wheel sizes (26", 27.5", 29"). Weight approx. 200g per wheel. Compatible with all wheels, independent of the brand. Minimum inner rim width: 23mm. PROCORE is a joint development of SCHWALBE and SYNTACE. PROCORE - the outer chamber The outer chamber is tubeless. Therefore, any tubeless compatible MTB tyres can be used. The tyre is filled with some liquid sealant (approx. 60ml) and should be at least 57mm (2.25") wide. PROCORE - the inner chamber Two special Procore components form the inner high-pressure chamber: the special Procore tube and the Procore inner tyre. This "core" is extremely high-pressure stable and at the same time very light. The Rim Of course, the rim must be tubeless compatible and sealed with a tubeless rim band. It should have an inner rim width of at least 23mm. The wider the rim, the easier the installation and the better the performance under low air pressure. The very wide Syntace rims are a perfect fit. The PROCORE Valve The patented dual valve of the Procore tube distributes the air into both chambers. The upper part of the valve is a selector. With a simple turn, you select whether air is pumped into the inner or the outer chamber. (Valve sold separately). The PROCORE Air Guide The small red component made of white plastic ensures that the air can flow past the inner high pressure chamber into the outer low pressure chamber. - Tyre pressure can be reduced to a minimum 14 psi, thus providing a huge amount of grip. Even on the roughest terrain tyres “stick” to the ground. - Due to the extra cushioning and traction there is much better steering, braking and traction control. - No more risk of snake bites. The rims are extremely well protected from denting. - Even in the toughest conditions, significantly lighter tyres can be used. - Excellent emergency running characteristics due to the internal high-pressure air chamber.
The Muc-Off Tyre & Cassette Brush is best used with Muc-Off's Nano Tech Bike Cleaner on the affected areas. Then agitate with the Tyre & Cassette Brush and rinse clean, followed by a fresh dose of chain lube.
The lenses are anti fog and anti scratch and come as a 3 pack- clear, low light yellow and dark. The lenses come film wrapped to ensure they remain fresh and scratch free until you're ready to ride..
This drop handlebar features a tough aluminium construction, which makes it more than capable of withstanding all the abuse that comes with a long day out on the road. ZZYZX has also equipped this road-ready drop bar with comfortable modern geometry, which makes changing your riding position as easy as possible. This makes it a perfect choice of upgrade for riders who enjoy clocking up the miles with a durable handlebar keeping them in control.
Easy and Hassle-Free Pressure Adjustment Featuring a pivot head to make pressure measuring easy and hassle-free. You simply press the gauge onto the valve head and within 3 seconds you will have the precise value of the pressure within your tyre. It features a 'Calculation Mode' for measuring the maximum pressure of a sealed tyre and an 'Adjustment Mode' to measure the inflation of a tyre and also to determine if a tyre is losing pressure. This gauge features a bleed valve should you notice you have overinflated slightly and need to adjust the pressure; you no longer need to remove the gauge from the valve and can simply release increments of air to fine-tune the pressure value.
Stay safe on your cycle commute and winter training rides. The LifeLine Aero Beam rear light is designed to help make you visible to other road users in darkness and low light conditions. 16 red LEDs provide a powerful beam with high visibility from the rear and sides. 5 beam modes let you choose how best to be seen, from eye catching flash and pulse modes, to super bright high beam mode. The narrow body matches the profile of your seat tube for a clean look and the silicone strap provides a secure fit without an unsightly mounting bracket. Charging is delivered via a convenient micro USB port, protected by a water-resistant silicone cover. A full charge from empty takes approximately 2-3 hours. Battery Life: High Beam: 1.5 Hours Low Beam: 6 Hours Pulse: 6 Hours High Flash: 24 Hours Low Flash: 27 Hours
Developed for a wide range of riding disciplines from mountain bike (MTB) to cross country (XC), these grips offer a fantastic balance of comfort, stability and control wherever your next adventure takes you. They feature a ProTaper logo grip pattern that's supportive for your palms as you conquer the more demanding of terrain conditions on your ride. Coming equipped with a single lock-on clamp, these are easy to secure in place and are designed to fit 22.3mm handlebar diameters. When clamped in place on your handlebar, they provide a strong and secure hold for slip-free steering performance. Sold as a pair. Manufacturer's Part Number: 361-37218-K001 Black
Whether you ride with gloves or without, you'll enjoy consistent and reliable grip in all conditions, plus their ultra-durable compound is durable enough to last through many seasons of abuse. The double lock rings ensure they stay in place, no matter how hard you're pushing yourself.
This 100% synthetic oil grease coats ball bearings and races, preventing wear and distortion in headsets and bottom brackets, even in brutal down hill racing and over extended periods of time. Chosen since 1988 by more top pro teams as the slickest, toughest bicycle grease available. No matter how hard or long you ride, Finish Line Premium Grease will provide the lubrication your bearings require.
dhb have designed their Women's Short Sleeve Seamless Base Layer with functional knitted zones to provide wicking, venting and increased stretch in the areas you need them most. This base layer also benefits from a high level of moisture-management, meaning the fabrics draw sweat away from the skin quickly to keep you feeling drier and fresher on your ride. The dhb Seamless Short Sleeve Base Layer is designed to provide a supportive and ergonomic fit with a high level of stretch. Thanks to the elimination of seams around the body, the base layer follows the natural contours of the shoulders for increased comfort, reducing friction and chafing when training. Paired with different weights of jersey, this is a versatile base layer suitable for all but the hottest of days.