An ultralight road inner tube which comes in three Presta valve sizes to suit your preferred wheel rim depth (40mm, 52mm or 60mm), it weighs a mere 70g and is constructed with the quality expected of such a renowned manufacturer.
Designed for use with SPD compatible shoes and compatible with all Shimano SPD pedals.
dhb have designed their Short Sleeve Seamless Base Layer with functional knitted zones to provide wicking, venting and increased stretch in the areas you need them most. This base layer also benefits from a high level of moisture-management, meaning the fabrics draw sweat away from the skin quickly to keep you feeling drier and fresher on your ride. The dhb Seamless Short Sleeve Base Layer is designed to provide a supportive and ergonomic fit with a high level of stretch. Thanks to the elimination of seams around the body, the base layer follows the natural contours of the shoulders for increased comfort, reducing friction and chafing when training. Paired with different weights of jersey, this is a versatile base layer suitable for all but the hottest of days.
Engineered from quality materials and treated with protective chrome plating, this cassette shifts smoothly while also resisting corrosion and rust. Key Features: Cassettes for 10 Speed Chrome Plated Sprockets Gear Ratios: 11-32T: 11-12-13-15-17-19-21-24-28-32 11-34T: 11-12-13-15-17-19-21-24-28-34 11-36T: 11-13-15-17-19-21-24-28-32-36
Body Glide (skin protection balm) is ideal for bras and sports bras, and sensitive areas where rubbing from your undergarments and clothing is irritating or causes chafing. Body Glide is also great for your feet as it comes formulated with Vitamin F Forte that helps keep skin soft and moisturised. Around your bra, on your thighs and feet, the plant-derived ingredients create a natural barrier to moisturise your skin, allowing it to breathe and perspiration to escape, while helping guard against irritation, chafing and blisters. Body Glide is easy to apply and comes in a clean and tidy container. Prevention Prevention is easier, faster, and costs less than buying first aid supplies, and waiting for recovery. The risk of rubbing is that it wears away your skin. A little may not matter much. But it does as minor irritation or rash advance to chafing, blisters, raw skin, and sometimes an open wound. You may be left with scarring. In the worst cases, the body is open to infection. Stopping skin irritation before it starts is the best way to control risk, maintain healthy skin and stay pain free. It’s why more people turn to Body Glide. Invisible Comfort Body Glide products stay right where you apply them, and do not block your pores. They allow perspiration to escape, vital to regulating your body temperature. The ingredients are plant-derived, many are custom blended natural waxes, and they don’t use cheap petroleum (petrolatum), mineral, vegetable oils, lanolin or any animal products or testing. To put it another way, Body Glide won’t offer you messy lotions, untested potions, or greasy, ineffective jellies. Directions for Use Before putting on your clothes, apply the Body Glide Anti-Chafing Balm for Her, directly from the stick, to your inner thighs, under arms, around the area your sports bra rubs, and wherever else your skin is sensitive to rubbing. Only apply to intact skin. Use before sporting activities or anytime to protect skin. Wash off with mild soap. Ingredients: Caprylic/Capric Triglyceride, Cetearyl Alcohol, Ozokerite Wax, Glyceryl Behenate, Stearyl Alcohol, Allantoin, Cocos Nucifera (Coconut) Oil, Prunus Dulcis (Sweet Almond) Oil, Tocopherol (Vitamin E), Vitamin F (Glyceryl Linoleate, Glyceryl Linolenate). Allergen Information: The Anti-Chafing Balm for Her isn’t suitable for those with nut allergies. The balm contains sweet almond oil.
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
Foaming Chain Cleaner is a real innovation in bike maintenance. Utilising Fenwick’s cleaning superiority, chain cleaning has never been so easy. Fenwick's Foaming Chain Cleaner makes chain cleaning part of your bike wash routine, instead of a laborious 2nd job that never gets done. With its simple mess free application, there is very little waste as only 5 to 10ml of product is needed per clean and it is biodegradable too. Foaming Chain Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use. To make the process even easier just use the Chain Cleaning Sponge to scrub the chain and the Gear Brush to agitate the cassette, jockey wheels and chainset. The cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces. Directions for use: 1) Place the chain in middle gear for ease of use 2) Whilst turning the crank spray Foaming Chain Cleaner directly on to chain 3) Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwick’s BIKE CLEANER 4) For best results run the chain through the Fenwick’s CHAIN CLEANING SPONGE, specifically designed to agitate and, importantly, capture the chain dirt for a cleaner clean 5) Rinse thoroughly with clean water Top tip: As a water soluble degreaser Foaming Chain Cleaner can be used on delicate parts
Simple and sleek the tool stash has an internal mesh that keeps your essentials in place. It will fit snuggly in a regular size bottle cage.
Ideally used for tethering your bike to car racks or keeping bags and luggage reliably attached to your pannier racks, this Design & Innovation Award-Winning cable can be used for a variety of security purposes. The double locking mechanism and steel inner make the Z LOK extremely hard to break, with the universal key adding further protection against theft or your items coming loose.
Compatibility: SRAM 2017+ brakes & RockShox Reverb 1x remote with Bleeding Edge™ bleed port Please Note: This bleeding kit is not compatible with the more modern RockShox Reverb dropper remotes which use the "Connectamajig" type connection
Designed for use with the common 31.8mm handlebar diameter, the Brand-X MTB Stem features a flip/flop design. This enables you to mount it in a comfortable upright position or a lower position for ultimate control. This alternative lower position makes it ideal for use on bikes with 27.5” (650b) or 29” wheels that have a higher front end.
Also, by using a low profile and a soft rubber compound, Nukeproof ensured that these grips offer optimised trail feedback without compromising on comfort. The locking mechanisms on either end provide a secure connection with the bar and the durable A25 Kraton rubber not only offers excellent grip, it ensures a long lifespan.
This is a genuine Vitus replacement rear shock bolt for the Dominer mountain bike (MTB) frame.
Designed for use with the now common 31.8mm handlebar size, you can mount the Brand-X Road stem two ways. You can mount it in its relaxed 7-degree rise for a comfortable endurance position, or flip it over and mount it upside down to obtain a lower, more aerodynamic race position. It’s finished with subtle styling and an anodised coating, meaning it will compliment any bike.
Designed for use with the common 31.8mm bar thickness, you can install the Enduro stem in two ways. Run it in its standard upright position for a more relaxed ride, or flip it over and run it the other way for a more aggressive position. This lower option makes it ideal for use with modern MTB’s larger 27.5” or 29” wheels.
Whether you're attacking your local trails at the weekend or exploring new routes through the mountains with your riding buddies, this MTB stem is engineered for securely holding your steering setup together, whatever the conditions. It features a high-quality alloy construction, which allows it to deliver a rock-solid connection between your handlebar and your fork's steerer tube. Syncros has also equipped this version with an anodised finish for an extra level of protection against corrosion, making it ideal for all weather and trail conditions. Suitable for handlebars with a 31.8mm bar clamp diameter and forks with a 1 1/8" steerer diameter, this is a perfect choice of upgrade for a solid hold as you carve your way around the mountain. Manufacturer's Part Numbers: 91360060012 Black/White 100mm 91360060013 Black/White 90mm 91360060014 Black/White 80mm 91360060015 Black/White 70mm
The Camelbak Podium Chill 710ml/24oz Water Bottle features an innovative self sealing Jet Valve™ to prevent any spills or leakage as you ride, allowing you to drink with a consistent flow. The positive lockout cap is also easy to activate and remove with a quick twist and pull during or after outside adventures.
In addition to good looks, the titanium bolt saves some weight compared to standard steel to save you some vital grams. Please click here for how to fit your Nukeproof top cap.
These single lock-ring grips have a super slim low profile design and even moisture channels, drawing sweat and water away from the hands, helping you to enjoy consistent grip. Weighing in at just 92g, you may even forget the Race Face Half Nelson grips are even there.
This mountain bike (MTB) stem is specifically designed for the rigours of modern trail riding and all mountain exploring. It comes equipped with a hard-wearing 6061 alloy build to ensure a strong and secure connection between your handlebar and your fork's steerer tube. Suitable for use on handlebars with a 31.8mm bar clamp diameter and forks with a 1 1/8" steerer diameter, this is a great choice of upgrade for holding your steering set-up together as you conquer your way around the mountain. Manufacturer's Part Numbers: 91360060002 Black/White 110mm 7 Degrees 91360060004 Black/White 80mm 12 Degrees 91360060006 Black/White 110mm 12 Degrees