Whether you're shredding your favourite local trails with your riding buddies or attacking some technical routes on your own, this full suspension mountain bike (MTB) frame is engineered for performance. It features a robust 6061 aluminium frame construction that's been put through a hydroforming and triple-butting process to ensure maximum strength and durability as you conquer your way around the mountain. Nukeproof has also equipped this model with a dependable RockShox Super Deluxe Ultimate RCT rear shock for smooth and consistent rear end suspension performance, whatever the trail conditions. Coming complete with 148x12mm Boost rear hub spacing and internal cable routing, this is an ideal choice of upgrade for handling the demands modern MTB trail riding. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Triple-Butted Alloy MTB Frame The Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible. The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 160mm (Comp 150mm) Axle to Crown: 555mm (Comp 545mm) Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 275 Alloy, 140mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two position adjustable Flip chip system Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x55mm, Bearing End, 1x bottomless token fitted Headset: Nukeproof, 44-56 IITS Weight: 3.79Kgs/8.3lbs (Medium option)
The Mega 297 Pro Alloy features a mixed wheel platform with a 29"-wheel up front and a 27.5" at the rear, giving the optimal balance of fast-rolling, all-terrain stability mixed with playfulness and agility. It also has a durable and lightweight custom-butted alloy frame with 170mm-travel RockShox ZEB suspension forks and a Super Deluxe rear shock. Ideal for riding with pace, stability and control over the most challenging terrains on Earth, the Mega Pro 297 is ready for anything. SRAM GX Eagle Groupset and Guide RE Hydraulic Disc Brakes This Mega 297 Pro is kitted out with a SRAM GX Eagle 12-Speed groupset that includes a wide-ranging 10-52T cassette and SRAM Guide RE hydraulic disc brakes. Nukeproof has it rolling upon Tubeless Ready Nukeproof Neutron V2 wheels wrapped in Maxxis Assegai and Minion DHR Tubeless Ready tyres. And it's fitted with a Brand X Ascend internally cable routed dropper seatpost. Enduro World Series Full Suspension Nukeproof Mega For over 10 years, Nukeproof's best-selling model - the Mega has been racking up awards on Enduro stages and in the press around the world. With 4 Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. However, Nukeproof never rests on their laurels with the 4th generation Mega - Now available in an all-new mixed wheel size platform. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of our riders and customers alike. The Mega V4 is now available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups, with each frame design tailored around each wheel size. The new mixed platform uses a 29” wheel up front to maximise grip and rolling efficiency whilst the 27.5” wheel out back, ensures nimble handling for manoeuvrability. Designed as an evolution of the ultimate Enduro bike, the Mega V4 has been fully reimagined to offer optimised sizing/fit, improved Geometry and suspension kinematics. Most importantly you can now fit a water bottle inside the main front triangle. Strong and Lightweight Alloy Full Custom Butted Frame The Alloy Mega features a full custom triple-butted hydro-formed 6061-T6 Aluminium tube set and forged parts. It is available for 27.5”, 297 or 29” wheel sizes. These are totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size so that you can get the most out of every ride. Updated Sizing and Geometry Whilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit Nukeproof now offer 297 bikes in S, M, or L sizes and 290 bikes in M, L, XL or XXL. Lower, longer, steeper and slacker. Nukeproof's new geometry is now designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit on each size. To further aid the perfect fit they have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all new Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities. Progressive and Supportive Mega Suspension Platform To step-change the Mega’s suspension design Nukeproof went back to the drawing board and started afresh. They redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid-stroke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The new kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence-inspiring everywhere on the hill. It behaves itself on the climbs yet can still be thrashed through the roughest and most technical terrain on the way back down. Features: Frame: Nukeproof Mega V4 297 Alloy, 165mm Travel, custom triple butted hydro-formed tube set, internal cable routing, ISCG 05 mount, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection Fork: RockShox ZEB Select + Charger 2.1 RC 170mm, 44mm Offset, BOOST, Debonair, Gloss Black Shock: RockShox Super Deluxe Select+ RT, Custom LIN L1 HOTDOG S320 tune, 230x62.5mm, Bearing End, 2 bottomless tokens fitted Front Wheel: Nukeproof Neutron V2 29", Tubeless Ready, 32h, 110x15mm Rear Wheel: Nukeproof Neutron V2 27.5", Tubeless Ready, 32h, SRAM XD Driver with 36 points of engagement, 148x12mm Tyres: Front: Maxxis Assegai 29" x 2.5 WT, 3C MaxxGrip DD TR, Rear: Maxxis Minion DHR II 27.5" x 2.4 WT, 3C MaxxTerra DD TR Crankset: SRAM Descendant 7K Eagle 12-Speed, 170mm, 32T, B148, DUB Shifter: SRAM GX Eagle 12-Speed Rear Derailleur: SRAM GX Eagle 12-Speed Chain: SRAM GX Eagle 12-Speed Cassette: SRAM GX Eagle 12-Speed, CS XG1275 EAGLE 10-52T Chain Guide: Nukeproof Chain Guide with Bash, 28-36T, ISCG-05, Black Brakes: SRAM Guide RE Front Rotor: SRAM Centreline, 200mm Rear Rotor: SRAM Centreline, 200mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm Stem: Nukeproof Neutron AM, 45mm, Black Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal, 31.6mm, S:125mm drop; M:150mm drop; L:170mm Drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 15.49kg Medium Tubeless Key Information: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 586mm Fork Offset: 44mm Rear Travel: 165mm Wheels Size: Front 29" / Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
From concept through to design, Kinematics, geometry and specification, the RS model is designed from the ground up to be the ultimate aggressive trail bike. It's the hooligan option in the Reactor range, with a host of upgrades to make it burlier than the rest. It features a RockShox Lyrik Ultimate RC2 forks (150mm) up front, a RockShox Super Deluxe Ultimate RCT rear shock and Nukeproof's award-winning carbon handlebars. There's also 4 Pot SRAM Code RSC disc brakes (with sintered pads), a SRAM ASX Eagle 12-Speed wireless drivetrain with Carbon X1 Cranks and DT Swiss XM1700 Spline 30 wheelset. Frame Construction: To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry: All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, Nukeproof designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: Frame: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection Fork: RockShox Lyrik Ultimate Charger 2.1 RC2 150mm, 42mm Offset, BOOST, Debonair, Gloss Red Rear Shock: RockShox Super Deluxe Ultimate RCT, Custom 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted. Front Wheel: DT Swiss XM1700 Spline 30, 29", 6 Bolt, 110x15mm Rear Wheel: DT Swiss XM1700 Spline 30, 29", 6 Bolt, XD Driver, 148x12mm Tyres: Front: Maxxis Assegai 29”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29”x2.4 WT 3C MaxxTerra/EXO+/TR Crankset: SRAM X1 Carbon Eagle 12-Speed, 170mm, 30T, B148, DUB Shifter: SRAM AXS Eagle 12-Speed, Red Rear Derailleur: SRAM AXS X01 Eagle 12-Speed, Red Chain: SRAM GX Eagle 12-Speed Cassette: SRAM XO1 Eagle 12-Speed, CS XG1295 EAGLE 10-52T Brakes: SRAM Code RSC Sintered Pads Front Rotor: SRAM Centreline, 200mm Rear Rotor: SRAM Centreline, 180mm Handlebars: Nukeproof Horizon Carbon V2 25mm Rise, Width - M780mm, L800mm, XL800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Bikeyoke Revive Stealth with Triggy Long Lever; M:160mm drop; L:185mm drop; XL:213mm drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 13.86Kg (Medium, Tubeless) Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table for accurate information. Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 150mm Axle to Crown: 561mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
The MegaV4: born through Evolution, not revolution. The Nukeproof Mega: an “enduro bike” that was ahead of its time. Originally developed and later named after the race it was designed for on the infamous trails of Alp D’Huez. To date the Mega platform is one of the most highly decorated race bikes on the market: with the 2017, 2018 (x2) and 2019 Enduro World Series Titles; a Downhill World Championship top 10 and a Silver Medal at the 4x World Championship to its name. (As well as a host of other national and international victories and titles) Since 2009, the Nukeproof Mega has been on a constant path of development to meet the evolving demands of Nukeproof's professional riders and its customers alike. They are relentlessly striving for improvements and with each generation, the Mega has been chiselled and shaped into today’s thoroughbred Enduro race bike. With the launch of the 2020 Carbon Mega 290c, you could forgive Nukeproof's designers for resting on their laurels. However, as its products are developed between the tapes, there is a constant desire to hone and refine in order to give its athletes and riders the best possible chance of standing on top of the podium. Designed as an evolution of the ultimate Enduro bike, the Mega V4 has been fully reimagined to offer optimised sizing/fit, improved geometry and suspension kinematics. Most importantly you can now fit a water bottle inside the main front triangle. Frame Construction: The Alloy Mega features a full custom triple-butted hydro-formed 6061-T6 Aluminium tube set and forged parts. It is available for 27.5”, 297 or 29” wheel sizes. These are totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size so that you can get the most out of every ride. Updated Sizing/Geometry: Whilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit Nukeproof now offers the 297 bikes in S, M, or L sizes and the 290 bikes in M, L, XL or XXL. Lower, longer, steeper and slacker! Nukeproof's geometry is now designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit on each size. To further aid the perfect fit they have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities. Suspension Design: To step-change the Mega’s suspension design Nukeproof went back to the drawing board and started afresh. They redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid stoke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence inspiring everywhere on the hill. It behaves itself on the climbs; yet can still be thrashed through the roughest and most technical terrain on the way back down. Full Specification List: • Frame: Nukeproof Mega V4 290 Alloy, 160mm Travel, custom triple butted hydro-formed tube set, internal cable routing, ISCG 05 mount, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection • Fork: RockShox ZEB Select + Charger 2.1 RC 170mm, 44mm Offset, BOOST, Debonair, Gloss Black • Shock: RockShox Super Deluxe Select+ RT, Custom LIN L1 HOTDOG S320 tune, 230x62.5mm, Bearing End, 2 bottomless tokens fitted. • Front Wheel: Nukeproof Neutron V2 29", Tubeless Ready, 32h, 110x15mm • Rear Wheel: Nukeproof Neutron V2 29", Tubeless Ready, 32h, SRAM XD Driver with 36 points of engagement, 148x12mm • Tyres: Front: Maxxis Assegai 29" x 2.5 WT, 3C MaxxGrip DD TR, Rear: Maxxis Minion DHR II 29” x 2.4 WT, 3C MaxxTerra DD TR • Crankset: SRAM Descendant 7K Eagle 12-Speed, 170mm, 30T, B148, DUB • Shifter: SRAM GX Eagle 12-Speed • Rear Derailleur: SRAM GX Eagle 12-Speed • Chain: SRAM GX Eagle 12-Speed • Cassette: SRAM GX Eagle 12-Speed, CS XG1275 EAGLE 10-52T • Chain Guide: Nukeproof Chain Guide with Bash, 28-36T, ISCG-05, black • Brakes: SRAM Guide RE • Front Rotor: SRAM Centreline, 200mm • Rear Rotor: SRAM Centreline, 200mm • Handlebars: Nukeproof Horizon V2 25mm Rise, Width - M780mm, L800mm, XL800mm, XXL800mm • Stem: Nukeproof Neutron AM, 45mm, black • Saddle: Nukeproof, Black • Seatpost: Brand X Ascend internal, 31.6mm, M:150mm drop; L:170mm drop; XL/XXL:200mm • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: 15.52kg (Medium, Tubeless) Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table above for accurate information. Key Specifications: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 586mm Fork Offset: 44mm Rear Travel: 160mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
The Cub-Scout 26 Race is equipped with 120mm-travel Manitou Markour air suspension forks, a 10-Speed groupset with a wide-ranging 11-42T cassette and powerful Clarks kid-specific hydraulic disc brakes. It also rolls upon Boost Nukeproof Neutron Tubeless Ready wheels wrapped in Tubeless Ready large volume 2.5” Maxxis Minion DHF tyres. Engineered for Young Off-Road Trail Riders The Cub-Scout 26 Race is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 26 has been designed from the ground up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of their own children, Nukeproof has created a class-leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners. The range of Cub-Scout Hardtails are available in 20”, 24” or 26” options. This means that there should be a bike to suit kids of all sizes from ages 5 and up. Each bike features a lightweight custom butted 6061 Alloy frameset with bang up to date long, low and slack kids-specific geometry. Kids Specific Components: Proper fit and function of components are essential for kids bikes because adult components are not optimised for smaller people. To ensure that these bikes fit and function perfectly, Nukeproof took the time to test and develop their own or work with their partners to select the best kids-specific components they could find on the market. Kid Specific parts include: Manitou Markour Air Suspension forks with custom optimised damping for lighter riders Clarks Clout Kids Specific Hydraulic Disc Brakes Nukeproof Urchin Saddle Nukeproof Urchin Handlebar (700mm wide) Nukeproof Urchin Grips 160mm Samox 2 piece Crank WTB STi 30 TCS Rims (Tubeless Ready) Large Volume 2.5” Maxxis Minion DHF Tyres to ensure grip and a smooth ride Features: Frame: Nukeproof Cub-Scout 26, custom-butted hydro-formed 6061 Alloy, internal cable routing for dropper seat posts, threaded bottom bracket, 142mm Bolt-thru rear axle spacing Fork: Manitou Markhor 27.5” TS Air, 120mm Travel, Custom Kids tune, 1.5 Tapered Steerer, 51mm Offset, BOOST 15x110mm Bolt-thru Axle Front Wheel: Nukeproof Neutron 15x110mm BOOST hub on WTB STi30 26" TCS Rim Rear Wheel: Nukeproof Neutron 12x142mm hub on WTB STi30 26" TCS Rim Tyres: Front & Rear: Maxxis Minion 26" x 2.5" EXO TR (Tubeless Ready) Crankset: Samox TAF38J 2 Piece Crank 160mm, 32T, BCD 104 Shifter: Shimano M5120 Rear Derailleur: Sunrace MS10 Cassette: Sunrace CSM680 8-Speed, 11-42T Brakes: Clarks Clout Kids Specific Hydraulic Brakes Front Rotor: Clarks, 160mm Rear Rotor: Clarks, 160mm Handlebar: Nukeproof Urchin 700mm Wide, 15mm Rise, 31.8mm Clamp Stem: Nukeproof Neutron AM, 45mm, black Saddle: Nukeproof Urchin, Black Seatpost:: Nukeproof Urchin, Black, 27.2mm, 300mm Long, 0 Offset Headset: Nukeproof Warhead, ZS44 / ZS56 Grips: Nukeproof Urchin Single Clamp lock on, 132mm Long, Soft Compound Weight: 12.62kg Key Information: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 120mm Axle to Crown: 514mm Fork Offset: 46mm Wheels Size: 26" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44mm Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 (For Tapered fork) Seatpost: 27.2mm (Internal Routing for Dropper Seatpost) Seat Clamp: 31.8mm BB: Threaded 68mm BSA Rear Hub: 142x12mm Front Hub: 110x15mm Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Front Axle: Included with fork Chain Guide: ISCG05 Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Cub-Scout 20 Sport features a Shimano 8-Speed groupset, Clarks Clout hydraulic disc brakes and a superb kids-specific finishing kit from Nukeproof. It also rolls upon Boost Joytec hubs, Tubeless Ready WTB STi30 rims and high-grip Maxxis Minion DHF 2.4" tyres. Engineered for Young Off-Road Trail Riders The Cub-Scout 20 Sport is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 20 has been designed from the ground up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of their own children, Nukeproof has created a class-leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners. The range of Cub-Scout Hardtails are available in 20”, 24” or 26” options. This means that there should be a bike to suit kids of all sizes from ages 5 and up. Each bike features a lightweight custom butted 6061 Alloy frameset with bang up to date long, low and slack kids specific geometry. Kids Specific Components: Proper fit and function of components are essential for kids bikes because adult components are not optimised for smaller people. To ensure that these bikes fit and function perfectly, Nukeproof took the time to test and develop their own or work with their partners to select the best kids-specific components they could find on the market. Kid Specific parts include: Cub-Scout 20 Frame Nukeproof 20"+ Rigid fork Clarkes Clout Kids Specific Hydraulic Disc Brakes Nukeproof Urchin Saddle Nukeproof Urchin Handlebar (20" – 600mm/24" – 640mm/26" – 700mm) Nukeproof Urchin Grips 127mm Samox 2 piece Crank WTB STi 30 TCS Rims (Tubeless Ready) Large Volume 2.4’’ Maxxis Tyres to ensure grip and a smooth ride Features: Frame: Nukeproof Cub-Scout 20, custom-butted hydro-formed 6061 Alloy, threaded bottom bracket, 142mm Bolt-thru rear axle spacing Fork: Nukeproof Cub-Scout 20”+ Fork, custom-butted hydro-formed 6061 Alloy, 1 1/8th Steerer, 40mm Offset, 15x100mm Bolt-thru Axle Front Wheel: Joytec D041-15 15x100mm hub on WTB STi30 20" TCS Rim Rear Wheel: Joytec D952TSE-X12 12x142mm hub on WTB STi30 20" TCS Rim Tyres: Front & Rear: Maxxis Minion DHF 20" x 2.4", TR Crankset: Samox TAF38J 2 Piece Crank 127mm, 32T, BCD 104 Shifter: Shimano M315 8-Speed, w optical display Rear Derailleur: Shimano M310 8-Speed Chain: KMC Z8.1 EPT 8-Speed Cassette: Sunrace CSM55 8-Speed, 11-34T Brakes: Clarkes Clout Kids Specific Hydraulic Brakes Front Rotor: Clarkes, 160mm Rear Rotor: Clarkes, 160mm Handlebar: Nukeproof Urchin 600mm Wide, 15mm Rise, 31.8mm Clamp Stem: OEM 40mm, black Saddle: Nukeproof Urchin, Black Seatpost: Nukeproof Urchin, Black, 27.2mm, 300mm Long, 0 Offset Headset: Nukeproof Warhead, 44-44 IESS Grips: Nukeproof Urchin Single Clamp lock on, 115mm Long, Soft Compound Weight: 10.02kg Key Information: Cub-Scout 20 Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: N/A Axle to Crown: 385mm Fork Offset: 40mm Wheels Size: 20" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44mm Semi-Integrated Headset: ZS44-28.6 - T2 / ZS44/30-S - B3 (For Straight Steerer fork) Seatpost: 27.2mm Seat Clamp: 31.8mm BB: Threaded 68mm BSA Rear Hub: 142x12mm Front Hub: 110x15mm Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Front Axle: M15*1.5 Thread x125mm (Thread Length 15mm) Chain Guide: ISCG05 Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Frame Construction: The Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible. The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry: All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, Nukeproof designed the 4-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 275 Alloy, 140mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection. • Fork: RockShox Lyrik Select + Charger 2.1 RC 160mm, 46mm Offset, BOOST, Debonair, Gloss Black • Shock: RockShox Super Deluxe Select+ RT, Custom 320 tune, 210x55mm, Bearing End, 1x bottomless token fitted. • Front Wheel: Nukeproof Neutron V2 27.5", Tubeless Ready, 32h, 110x15mm • Rear Wheel: Nukeproof Neutron V2 27.5", Tubeless Ready, 32h, SRAM XD Driver with 36 points of engagement, 148x12mm • Tyres: Front: Maxxis Assegai 27.5”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 27.5”x2.4 WT 3C MaxxTerra/EXO+/TR • Crankset: SRAM GX Eagle 12-Speed, 170mm, 32T, B148, DUB • Shifter: SRAM GX Eagle 12-Speed • Rear Derailleur: SRAM GX Eagle 12-Speed • Chain: SRAM GX Eagle 12-Speed • Cassette: SRAM GX Eagle 12-Speed, CS XG1275 EAGLE 10-52T • Brakes: SRAM Guide RE • Front Rotor: SRAM Centreline, 200mm • Rear Rotor: SRAM Centreline, 180mm • Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm • Stem: Nukeproof Neutron AM, 45mm, black • Saddle: Nukeproof, Black • Seatpost: Brand-X Ascend internal, 31.6mm, S:125mm drop; M:150mm drop; L: 170mm; XL:200mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: 14.51kg Medium Tubeless Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table above for accurate information. Key Specifications: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 160mm Axle to Crown: 552mm Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
The Cub-Scout 24 Sport features an alloy frame that is strong and lightweight, giving younger riders confidence to develop their riding style while RST First suspension forks ensure all-terrain control and traction. Nukeproof has equipped it with a BOX FOUR 8-Speed groupset that includes a wide-ranging 11-46T cassette and powerful hydraulic disc brakes. It also rolls upon 24" wheels wrapped in Tubeless Ready Maxxis tyres that are ideal for riding anywhere. The ideal hardtail MTB for single-track trail riding, laps at the bike park and long-distance off-road adventures with the family – the Cub-Scout 24 is an excellent stepping stone into the world of mountain bike riding. Engineered for Young Off-Road Trail Riders The Cub-Scout 24 Sport is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 24” has been designed from the ground up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of their own children, Nukeproof has created a class-leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners. The range of Cub-Scout Hardtails are available in 20”, 24” or 26” options. This means that there should be a bike to suit kids of all sizes from ages 5 and up. Each bike features a lightweight custom butted 6061 Alloy frameset with bang up to date long, low and slack kids specific geometry. Kids Specific Components: Proper fit and function of components are essential for kids bikes because adult components are not optimised for smaller people. To ensure that these bikes fit and function perfectly, Nukeproof took the time to test and develop their own or work with their partners to select the best kids-specific components they could find on the market. Kid Specific parts include: Cub-Scout 24 Frame RST First 24-15 Suspension forks with custom optimised damping for lighter riders Clarkes Clout Kids Specific Hydraulic Disc Brakes Nukeproof Urchin Saddle Nukeproof Urchin Handlebar (20” – 600mm/24” – 640mm/26” – 700mm) Nukeproof Urchin Grips 152mm Samox 2 piece Crank WTB STi 30 TCS Rims (Tubeless Ready) Large Volume 2.4” Maxxis Tyres to ensure grip and a smooth ride Features: Frame: Nukeproof Cub-Scout 24, custom-butted hydro-formed 6061 Alloy, internal cable routing for the dropper seat post, threaded bottom bracket, 142mm Bolt-thru rear axle spacing Fork: RST First 24-15 Air Suspension forks, 1 1/8th Steerer, 38mm Offset, 15x100mm Bolt-thru Axle Front Wheel: Joytec D041-15 15x100mm hub on WTB STi30 24" TCS Rim Rear Wheel: Joytec D952TSE-X12 12x142mm hub on WTB STi30 24" TCS Rim Tyres: Front & Rear: Maxxis Minion DHF 24" x 2.4", EXO TR Crankset: Samox TAF38J 2 Piece Crank 152mm, 32T, BCD 104 Shifter: BOX FOUR 8-Speed Rear Derailleur: BOX FOUR Short Cage 8-Speed with Clutch Chain: BOX FOUR 8-Speed Cassette: Sunrace CSMS2 8-Speed, 11-46T Brakes: Clarkes Clout Kids Specific Hydraulic Brakes Front Rotor: Clarkes, 160mm Rear Rotor: Clarkes, 160mm Handlebar: Nukeproof Urchin 640mm Wide, 15mm Rise, 31.8mm Clamp Stem: OEM 50mm, black Saddle: Nukeproof Urchin, Black Seatpost: Nukeproof Urchin, Black, 27.2mm, 300mm Long, 0 Offset Headset: Nukeproof Warhead, 44-44 IESS Grips: Nukeproof Urchin Single Clamp lock on, 115mm Long, Soft Compound Weight: 12.15kg Key Information: Cub-Scout 24 Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 100mm Axle to Crown: 455mm Fork Offset: 38mm Wheels Size: 24" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44mm Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 (For Tapered fork) Seatpost: 27.2mm (Internal Routing for Dropper Seatpost) Seat Clamp: 31.8mm BB: Threaded 68mm BSA Rear Hub: 142x12mm Front Hub: 110x15mm Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Front Axle: Included with fork Chain Guide: ISCG05 Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Providing a no-compromise, reliable and lightweight design that's also aesthetically pleasing, this seat clamp is fully equipped for long days in the saddle. Designed and developed by Nukeproof's in-house engineers, it features a CNC-machined 6061 aluminium build, which removes all unnecessary material so you can benefit from a super lightweight QR clamp at 42g without compromising strength. Another highlight is its incorporated ergonomic QR lever allows for on-the-fly tool-free saddle height changes. A CNC stainless steel barrel, stainless steel bolt, anodised finish and laser etched graphics ensure your clamp will stay fresh and hold your seatpost securely. The clamp is a universal design but has been designed to fit perfectly with Nukeproof frames to ensure a seamless gap-free fit between the clamp and the frame.
Compatible with the 2020-2022 Reactor Carbon, this genuine Nukeproof protector is a fantastic barrier that's engineered from a durable moulded silicone construction. It attaches to your frame's downtube by its 3M adhesive backing and provides protection against dings, dirt, rocks and damage.
The front body and sleeves of the Blackline Short Sleeve Jersey are constructed from a lightweight fabric (115gsm), highly breathable yarn that is super soft against the skin. Its mono stretch piquet fabric allows unrestricted movement and the increased wicking moisture alongside minimised drying manages your core temperature. It’s also abrasive resistant to ensure the Blackline Jersey stays looking fresh. The super lightweight (110 GSM) warp-knit back panel regulates body temperature by maximising the airflow out of the body and is both quick wicking and fast drying. The jersey is a trail fit, so designed to be worn loose against the body. Lastly, with its natural UV protection and an anti-bacterial finish, this is a jersey ideally suited to hitting the summer trails. Nukeproof have committed to using Bluesign® fabrics. This is a solution for sustainable textile production. It eliminates harmful substances right from the beginning of the manufacturing process and sets and controls standards for environmentally friendly and safe production. Nukeproof Blackline Fully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have all the features they wanted out of their ride apparel. The Blackline range is their premium trail collection.
The front body and sleeves of the Blackline Youth Long Sleeve Jersey are constructed from a lightweight fabric (115gsm), highly breathable yarn that is super soft against the skin. Its mono stretch piquet fabric allows unrestricted movement and the increased wicking moisture alongside minimised drying manages your core temperature. It’s also abrasive resistant to ensure the Blackline Jersey stays looking fresh. The super lightweight (110 GSM) warp-knit back panel regulates body temperature by maximising the airflow out of the body and is both quick wicking and fast drying. The jersey is a trail fit, so designed to be worn loose against the body. Lastly, with its natural UV protection and an anti-bacterial finish, this is a jersey ideally suited to hitting the summer trails. Nukeproof have committed to using Bluesign® fabrics. This is a solution for sustainable textile production. It eliminates harmful substances right from the beginning of the manufacturing process and sets and controls standards for environmentally friendly and safe production. Nukeproof Blackline Fully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have all the features they wanted out of their ride apparel. The Blackline range is their premium trail collection.
At 10mm shorter than Nukeproof's standard valve, this 35mm tubeless valve is less likely to be struck by trail debris such as rocks. The lower profile valve is complimented with further strength gains by using brass and a revised wall thickness. As a result, these updates make the valve super strong and only 2g heavier at 14g for the pair. As with Nukeproof's standard valves, this valve is fully compatible with tyre insert systems such as Nukeproof ARD and other brands. This model also benefits from a removable core, ensuring you can get the most airflow from your pump or cartridge. The head of this valve has also been designed to sit on top, enabling easier inflation and deflation. The same custom cap has been used with the integrated core remover, which allows for the core to be removed and fitted without specialist tools, while at the trailside or working from home. The nut has been designed so that you can get a good grip on the flat edges to firmly tighten the valve to the rim. An O-ring is included and sits against the outside of the rim to prevent damage from the nut tightening against the rim. How to Install Remove the valve cap and nut, insert the valve through the rim, fit the O-ring to the valve, thread on the nut and tighten by hand. Manufacturer's Part Number: NUKFTWG18AB-35LNF12R4BLK Black 35mm
Inspired by nature, this stylish screen printed Women's Botanical t-shirt gets it just right – a soft cotton tee with botanical prints and Nukeproof logos, it’s sure to make you stand out from the crowd. Made with 100% cotton, this Premium Nukeproof Tee is made from a soft jersey - slip it on when the sun is shining for casual comfort.
The front body and sleeves of the Blackline Youth Short Sleeve Jersey are constructed from a lightweight fabric (115gsm), highly breathable yarn that is super soft against the skin. Its mono stretch piquet fabric allows unrestricted movement and the increased wicking moisture alongside minimised drying manages your little rider's core temperature. It’s also abrasive resistant to ensure the Blackline Youth Jersey stays looking fresh. The super lightweight (110 GSM) warp-knit back panel regulates body temperature by maximising the airflow out of the body and is both quick wicking and fast drying. The jersey is a trail fit, so designed to be worn loose against the body. Lastly, with its natural UV protection and an anti-bacterial finish, this is a jersey that will keep your mini-me protected when hitting the summer trails. Nukeproof have committed to using Bluesign® fabrics. This is a solution for sustainable textile production. It eliminates harmful substances right from the beginning of the manufacturing process and sets and controls standards for environmentally friendly and safe production. Nukeproof Blackline Fully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have all the features they wanted out of their ride apparel. The Blackline range is their premium trail collection.
The front body and sleeves of the Blackline Women's Short Sleeve Jersey are constructed from a lightweight fabric (115gsm), highly breathable yarn that is super soft against the skin. Its mono stretch piquet fabric allows unrestricted movement and the increased wicking moisture alongside minimised drying manages your core temperature. It’s also abrasive resistant to ensure the Blackline Jersey stays looking fresh. The super lightweight (110 GSM) warp-knit back panel regulates body temperature by maximising the airflow out of the body and is both quick wicking and fast drying. The jersey is a trail fit, so designed to be worn loose against the body. Lastly, with its natural UV protection and an anti-bacterial finish, this is a jersey ideally suited to hitting the summer trails. Nukeproof have committed to using Bluesign® fabrics. This is a solution for sustainable textile production. It eliminates harmful substances right from the beginning of the manufacturing process and sets and controls standards for environmentally friendly and safe production. Nukeproof Blackline Fully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have all the features they wanted out of their ride apparel. The Blackline range is their premium trail collection.
Designed for Nukeproof Reactor Alloy 290 model, this genuine Nukeproof chain stay protector features a durable moulded silicone construction. Plus, it attaches to your frame's chain stay via the 3M adhesive backing and is a superb barrier against bangs, dings and dirt.
Engineered specifically for the 2020 Nukeproof Reactor Alloy 275 and 290 models, this genuine Nukeproof protector provides an exceptional barrier against mud, muck and riding mishaps thanks to their durable moulded silicone construction. It attaches to your frame's downtube via its 3M adhesive backing and offers outstanding protection against all types of dirt and damage.
This super-soft sherpa fleece-lined Robe from Nukeproof is designed for total comfort and protection. The 3/4 sleeves and generous sizing are designed for an easy change inside the robe, whilst the windproof and water-resistant outer keeps the bad weather out. The large two-way YKK zip is salt and freshwater resistant with looped zipper pulls to make it easier to use with cold and wet hands, whilst the two outer fleece-lined pockets are ready to keep hands warm. Keep valuables safe and dry with a water-resistant internal zipped security pocket. The Nukeproof Robe is made for total comfort, privacy and protection wherever and whenever you need a quick change.
A genuine high-quality frame spare from Nukeproof that is easy to fit and gets you back on the trails again in no time. Suitable for the 2016 to 2020 model's only.