The carbon Reactor 290 frame is a trail-ready full suspension mountain bike (MTB) frame that is more than capable of handling all the demands associated with all-day epics on the trails. Ready for charging across rock gardens, tree roots and debris, Nukeproof has also kitted out this model with a high-quality RockShox Super Deluxe Ultimate RC2T rear shock that brings exceptional smoothness, and traction tuneability and control to every ride, over all terrain conditions. Designed for modern trail riding, its 148x12mm Boost rear hub spacing gives it increased stiffness and strength, while its updated geometry with internal cable routing delivers slick handling on the most demanding of terrains. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon Fibre MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or Play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the 4-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate gives ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. RockShox Super Deluxe Ultimate Rear Shock Debuting a revolution in damper technology, the RC2T damper, found at the Ultimate level, allows for the most precise compression tuning ever seen—the kind that makes the millisecond’s difference between winning and learning. Tunability’s the name of the game—now you can fine-tune shock feel throughout travel from top to bottom out—or bottomless—it’s up to you to decide. Super Deluxe stakes its claim as the premier performance technology required by riders gunning for the crown. Let the winning legacy live on. Engineered to strike a chord, the new DebonAir+ system was built on the idea of tuneability. Designed to meet the needs of all types of riders, DebonAir+ offers two different air cans to augment each frame’s particular kinematics. Utilizing a needle that rations the flow of oil as the piston moves through the stroke, Hydraulic Bottom Out kicks in within the last 20% of travel, sparing you the pain of that harsh clanking bottom out after impact without sacrificing reactivity or traction. Found in our Super Deluxe lineup, Hydraulic Bottom Out plays nice with our Bottomless Tokens, allowing riders to fine-tune their air spring without worrying about bottoming out. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre, 130mm travel Use: Mountain Bike, All Mountain, Trail Shock: RockShox Super Deluxe Ultimate RC2T, Custom 0L1 32SB tune (L1 compression Tune with Linear Air Can, 0 Neg, 1 Pos Spacer and 320 lockout force) 210x55mm, Bearing End Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro Bearings Weight: 3.5Kgs/7.7lbs (Medium option) RockShox Super Deluxe Ultimate Technologies: RC2T Damper, the most tunable shock damper RockShox has ever made, offers completely independent High Speed and Low Speed Compression adjustments, eliminating “cross-talk” so you can tune your shock to exactly how you want it to perform DebonAir+ air spring maximizes fine-tuning potential, allowing you to tune both the negative and positive air volume to perfectly match your bike, desired ride feel, and the trail ahead The optional Hydraulic Bottom Out kicks in to restrict the flow of oil within the last 20% of travel, offering a soft hydraulic cushion that reduces harsh bottom out 15 clicks of Rebound adjustment offer a wider range of tunability and accommodate more rider types Castled bottom out bumper reduces harsh bottom-out, leaving extra room for the bold to go big Increased bushing overlap maximizes small bump performance and grip Separate and independent Open and Threshold pistons tuned exactly for your ride Fresh new premium graphics package to flash on the podium or as you blaze past your buddies on the doubletrack Top-of-the-line Maxima Plush Dynamic Suspension Lube reduces friction to help maintain traction
The front body and sleeves of the Blackline Short Sleeve Jersey are constructed from a lightweight fabric (115gsm), highly breathable yarn that is super soft against the skin. Its mono stretch piquet fabric allows unrestricted movement and the increased wicking moisture alongside minimised drying manages your core temperature. It’s also abrasive resistant to ensure the Blackline Jersey stays looking fresh. The super lightweight (110 GSM) warp-knit back panel regulates body temperature by maximising the airflow out of the body and is both quick wicking and fast drying. The jersey is a trail fit, so designed to be worn loose against the body. Lastly, with its natural UV protection and an anti-bacterial finish, this is a jersey ideally suited to hitting the summer trails. Nukeproof have committed to using Bluesign® fabrics. This is a solution for sustainable textile production. It eliminates harmful substances right from the beginning of the manufacturing process and sets and controls standards for environmentally friendly and safe production. Nukeproof Blackline Fully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB-inspired cut/fit and have all the features they wanted out of their ride apparel. The Blackline range is their premium trail collection.
Made with 100% cotton, this Premium Nukeproof T-Shirt is made from a soft jersey - slip it on when the sun is shining for casual comfort. The Nukeproof attitude graphics will be sure to make you stand out from the crowd.
Made with 100% cotton, this Premium Nukeproof T-Shirt is made from a soft jersey - slip it on when the sun is shining for casual comfort. The Nukeproof attitude graphics will be sure to make you stand out from the crowd.
Made with 100% cotton, this Premium Nukeproof Women's T-Shirt is made from a soft jersey - slip it on when the sun is shining for casual comfort. The Nukeproof attitude graphics will be sure to make you stand out from the crowd.
Made with 100% cotton, this Premium Nukeproof T-Shirt is made from a soft jersey - slip it on when the sun is shining for casual comfort. The Nukeproof attitude graphics will be sure to make you stand out from the crowd.
Made with 100% cotton, this Premium Nukeproof Tee is made from a soft jersey - slip it on when the sun is shining for casual comfort. The Nukeproof attitude graphics will be sure to make you stand out from the crowd.
Made with 100% cotton, this Premium Nukeproof Youth T-Shirt is made from a soft jersey - slip it on when the sun is shining for casual comfort. The Nukeproof attitude graphics will be sure to make you stand out from the crowd.
Made with 100% cotton, this Premium Nukeproof Women's T-Shirt is made from a soft jersey - slip it on when the sun is shining for casual comfort. The Nukeproof attitude graphics will be sure to make you stand out from the crowd.
Made with 100% cotton, this Premium Nukeproof Youth T-Shirt is made from a soft jersey - slip it on when the sun is shining for casual comfort. The Nukeproof attitude graphics will be sure to make you stand out from the crowd.
CNC Machined for Strength and To Reduce Weight Designed to be mounted either way around, allowing you to tailor your cockpit set up with 5mm rise or fall. Precisely CNC machined to ensure high strength and so that unnecessary material could be removed to save weight while creating a modern, sleek and stylish look. Offset Design for Greater Durability and Easier Fitting Featuring an offset design to provides maximum thread contact for the steerer bolts with the stem body, this provides the highest level of durability and safety. Also, all sharp edges have been removed during the machining process, which ensures a smooth finish while eliminating any risk of injury should your body come in contact with the stem. Additionally, the faceplate has been designed specifically to feature no gap at the top to provide a clean look and to make fitting even easier. The fitting instructions for this stem can be found HERE for your convenience and are also included within the item packaging.
A.R.D uses closed cell foam’s technology to make a lightweight tyre insert which gives you a lot of protection. A.R.D will enable you to run lower pressures without getting flats and in turn assist you to increase your grip out on the trails. Keeping weight down was a key factor in the development of ARD, a 27.5” insert will weigh 130g. Rider Kelan Grant has been using the same A.R.D for the 2018 EWS season, this includes riding a stage on just the ARD as his tyre split. In the box you will get a pair of A.R.D Inserts and a pair of copper coloured tubeless valves. The tubeless valves have been specially made for Nukeproof to allow you to inflate and deflate the tyre easily with A.R.D fitted in the wheel. Want to shorten ARD to fit in smaller wheels? Download a step by step guide here How To Fit ARD Video Guide
The great thing about Nukeproof's Merino Long Sleeve 1/4 Zip Baselayer is its ability to perform across a wide range of temperatures and conditions. When it's cold it's a great insulator, and yet it's naturally breathable and odour resistant too; moisture quickly evaporates when the fibres can’t hold any more, helping you maintain your temperature and avoid overheating when riding hard. Nukeproof give the base high neck to seal in warmth, and it can be easily unzipped if you get too hot. A raglan sleeve construction with flatlock seams give you extra comfort and you'll find thumbholes at the cuff to keep out the elements. With a looser mountain bike style fit you'll also love the freedom of movement it gives under your MTB kit.
The great thing about Nukeproof's Merino Long Sleeve Baselayer is its ability to perform across a wide range of temperatures and conditions. When it's cold it's a great insulator, and yet it's naturally breathable and odour resistant too; moisture quickly evaporates when the fibres can’t hold any more, helping you maintain your temperature and avoid overheating when riding hard. Nukeproof give the base layer a crew neck and raglan sleeve construction with flatlock seams for extra comfort and you'll find thumbholes at the cuff to seal in the warmth. With a looser mountain bike style fit you'll also love the freedom of movement it gives under your MTB kit.
Its unique process changes the Silicium/Chromium/Steel Alloy mix to produce a super hard, yet lightweight metal that will withstand the highest demands inflicted through MTB. To prevent shock rub, the spring is bi-convex in shape. This will allow the spring to progress freely without any friction when under load. Up to 40 per cent lighter than a steel spring, this hardened Super-light steel (SLS) spring has been designed to fit most rear shocks on the market by using Nukeproof’s unique Reducers and Spacers. This spring will work with metric shocks with an eye to eye between 210mm and 230mm, and with a stroke length between 47.5mm and 65mm. The spring will also work with standard shocks with an eye to eye between 200mm and 216mm, and a stroke length between 2” – 2.5” A pair of 38mm to 36mm reducers are included to allow this spring to be fitted to most shocks on the market. Spring Rate / Nukeproof Super Light (SLS) Weight We supply the correct spacers in the box to suit the rate of spring which you purchase.
The genuine Nukeproof Pulse Seatstay Protector is specially designed to be used with current 2016-2018 Nukeproof Pulse models. Thanks to the moulded silicone construction, your seatstay will be shielded with maximum protection. After a long day out on the trails, your mountain bike takes a lot of beating from stones, sticks and dirt backlash. The Nukeproof Pulse Seatstay Protector offers the ultimate defence against everything the elements throw at you, by securely fastening to your framework via 3M adhesive backing. Ideal for fitting to your bike ahead of your next adventure, for great protection from all types of grit, grime and mud,
Specially designed for current 2016-2018 Nukeproof Mega Alloy 275 and 290 models, the Mega Alloy - Downtube Protector is perfect for keeping your bikes framework free from damage. Made from moulded silicone construction for years of long-lasting protection against mud and dirt. Keep your downtube in peak condition from scratches, scores and scrapes thanks to this easy to apply shield. After a long day out on the trails, you can only expect stone rebounds and dirt backlash from riding the trails, so the Mega Alloy - Downtube Protector will give you a strong and durable solution for defending against all that the elements throw at you. Easy to apply thanks to the 3M adhesive backing, you can effortlessly install this helpful tool to protect your bike ride after ride. The Mega Alloy - Downtube Protector from Nukeproof is the perfect choice to keep your bikes framework safe from mud and dirt in even the most extreme conditions, all year round.
The Nukeproof Horizon CL CrMo Axle Kit contains a pair of replacement high-quality Nukeproof axles to fit Horizon CL pedals and a pair of M6 axle nuts. A guide for rebuilding your Nukeproof clipless pedal can be found here
This kit contains the parts required to replace your Nukeproof pedal bindings. The binding in this kit is the upgraded version which is more secure and helps prevent accidentally unclipping. This kit will fit all Nukeproof Horizon CS & CL pedals. A guide for rebuilding your Nukeproof clipless pedal can be found here
The Nukeproof Horizon CS CrMo Axle Kit contains a pair of replacement high-quality Nukeproof axles to fit Horizon CS pedals and a pair of M6 axle nuts. A guide for rebuilding your Nukeproof clipless pedal can be found here